In our daily life, there are more and more places where we can come into contact with job responsibilities, including the scope of work, the responsibility to achieve work goals, the working environment, job qualifications and the relationship between various jobs. So how are the relevant job responsibilities formulated? The following is my collection of duties of laboratory chemists (selected 12 articles). Welcome to read the collection.

Responsibilities of laboratory chemists 1 1. Strict and meticulous, do a good job in water quality testing, effectively control the quality, and ensure that the water quality of the factory products is 100% qualified.

Two, every day in the finished product packaging workshop or barrel workshop sampling inspection. During operation, the straw is cleaned with sterile water first, and then put into the pressure cooker for disinfection to ensure that the whole test process is completed in a sterile state.

Three, found that the test results exceed the standard or there are signs of exceeding the standard (less than three Escherichia coli per 100 ml, and the number of bacteria per ml is less than 100), to directly sample the water treatment for further testing, and analyze the reasons.

Four, after the test results come out, we should carefully fill in the test sheet, so that the figures are accurate and the information is complete, and send it to the leader in charge of production for signature.

Five, the laboratory instruments should be cleaned in time after use, and the laboratory room should always be kept in a good sanitary condition, so that the windows are clean and spotless.

Six, in addition to the water quality test work, according to the needs and leadership arrangements, complete the finished product packaging and other tasks.

The duties of the chemist 2 1. Assist the leader to complete the company's technical development plan.

2. Development of new products and processes, drafting and revision of technical standards.

3. Assist the leaders in preparing process design scheme, process regulations, process improvement and other process documents.

4. Technology introduction and technical data management.

5, workshop production technical guidance.

6. Assist relevant departments to complete the formulation of product-related system documents.

7. Work closely with the marketing department to assist leaders in developing new products;

8. Conduct market research on products with development prospects and make development plans; After the feasibility report is submitted to the general manager for approval, it will be run according to the relevant procedures of the quality system; Standardize the design and management of all products that can be standardized, and organize and file related documents. (including product development proposal, product development plan, sample making records, product specifications, inspection methods, sample inspection records, product processing technology, working hours, raw and auxiliary materials standards, design review reports, process documents, product development confirmation reports, production costs and unit prices of raw and auxiliary materials)

9. Provide technical guidance and training for product production;

10, foreign technical exchange, latest technology introduction;

1 1. Provide technical support for raw material trade.

12. Cooperate with the quality department to improve the quality system.

13, complete other work arranged by the leader.

Chemist 3 job responsibilities 1, responsible for the inspection of raw and auxiliary materials, packaging materials, semi-finished products and finished products;

2. Make inspection records carefully and correctly handle and sort out inspection data;

3, strictly implement the registration procedures of measuring instruments and inspection equipment, establish ledger files, so that the accounts are consistent;

4. Supervise the production work. Strictly follow the process documents and quality control procedures to help production workers analyze the causes of quality problems;

5. Non-conforming products shall be identified, recorded, evaluated, isolated and disposed of according to regulations;

6. Issue inspection report and be responsible for the correctness of the report.

Responsibilities of laboratory chemists: 4 1. Test the physical and chemical indexes of finished products, raw materials and samples to ensure that the quality of products and raw materials meets the standards.

2, according to the requirements of the relevant system for inspection samples and observation, to ensure the timely discovery and disposal of abnormal situation.

3, the implementation of laboratory test results records and archives, data management, to ensure the safety and traceability of all data.

4, the implementation of laboratory drug management, to ensure that the drug recipients meet the specifications, as well as the use and storage of drugs.

5. Change the samples of the company's booth regularly to ensure that the displayed samples are consistent with the actual situation.

6, laboratory 7S management and instrument maintenance.

7, other work assigned by the superior;

Job responsibilities of chemist 5 1. Be fully responsible for the quality management of this enterprise, and establish and improve the relevant processes and systems of quality management of this enterprise.

2, conscientiously implement the national guidelines and policies on food quality management.

3. Responsible for the management of personnel, equipment and laboratory reagents in this department.

4. Be responsible for the quality inspection and quality control of raw materials, semi-finished products and finished products.

5. Deal with all kinds of quality problems in the company's production process to ensure the normal operation of the production process.

Chemist's job responsibilities 6 1, product inspection, inspection record management, submitted to the superior leadership;

2, found that the product is abnormal or does not meet the requirements, issue a nonconformity report;

3, master the product acceptance criteria, and identify the product status and product traceability;

4. Management and maintenance of laboratory instruments and equipment

Responsible for the ordering and follow-up of packaging bags, and make inspection reports.

6. Complete other tasks assigned by the leaders on time, and be responsible for tracking.

Chemist's responsibilities: 7 1: to detect the quality of sewage and find abnormal conditions in time.

2. Ensure the normal calibration and maintenance of water quality testing instruments and equipment.

3. Through laboratory analysis and measurement, compare and calibrate the measurement of online instruments, and report any abnormality in time.

4. Inventory management of laboratory consumables, reagents and consumables.

5. Conduct quality inspection on outsourced conventional chemicals.

Responsibilities of laboratory chemists 8 1. Adhere to the policy of safe production, establish the idea of safety first, observe labor discipline, stick to your post and operate according to the rules.

2, detection of mine production and living wastewater quality.

3. Test the water quality of mine reuse water.

4. Test the quality of boiler water.

5. When the water quality is unqualified, report to the relevant personnel in time.

6, make records, do a good job in the civilized health equipment and work area.

Duties of Laboratory Chemist 9 Duties of Laboratory Chemist In order to standardize the working procedures of laboratory chemists, clarify the duties of laboratory chemists and improve the post responsibility consciousness of laboratory chemists, the following provisions are made.

1. Chemists should be familiar with the relevant laws and regulations, industry policies, national and industry standards of the industry, and carry out testing work in strict accordance with the existing effective technical standards at all levels.

2. Chemists should receive relevant job training, hold relevant certificates after passing the examination, and be familiar with the testing items carried out in our laboratory. Continuously improve business level and operational skills.

3. Chemists should consciously accept the assigned detection tasks and carry out detection work in time according to appropriate standards and analytical methods.

4. The laboratory technician shall be responsible for the reported inspection results, ensure the authenticity, accuracy and reliability of the inspection results, and fill in the use records and original records of instruments and equipment carefully, so as to ensure the accuracy, completeness and clarity of the records and ensure the reproducibility of the inspection process.

5. Chemists should be familiar with the operation methods and maintenance knowledge of various instruments and equipment used in the detection process, and operate according to the specifications.

6. Laboratory technicians are responsible for receiving, storing and circulating the designated samples during the testing process, and are responsible for the validity, integrity and representativeness of the samples.

7. Chemists are responsible for preparing all kinds of reagents and standard solutions used in testing items, ensuring the effectiveness of reagents and standard solutions, calibrating standard solutions regularly to ensure the accuracy of their concentrations, verifying them with standard samples, and making relevant records.

8. Chemists should monitor the laboratory environment at any time to eliminate the harmful effects of environmental factors on the test results, and make relevant records.

9. All kinds of drugs, reagents, consumables and labor protection articles used in the inspection process should be used correctly and reasonably to prevent waste, and must be registered when receiving.

10, the laboratory technician should do a good job of housekeeping in the laboratory to ensure that the table and floor of the laboratory are clean and tidy, and the experimental instruments are placed in an orderly manner. Waste gas, waste liquid and solid waste generated by the experiment should be discharged or discarded after proper treatment.

Responsibilities of chemist 10 1, responsible for all kinds of laboratory work of the group company and the company.

2, laboratory personnel in chemical experiments, must strictly abide by the operating rules, to avoid all kinds of accidents.

3, carefully record the chemical experiment, correctly handle and sort out the test data.

4, fill in the test report correctly, so that the project is complete, the handwriting is clear and correct, and signed by the experimenter and the tester. Major chemical test items and test reports sent to units outside the group company must be signed by the section chief or competent leader.

5, laboratory personnel should take good care of the instrument, and do a good job of maintenance.

6. Provide accurate and reliable analysis reports for the experimental research of new technologies, new materials and new products of the company and the group company.

7, in accordance with the relevant provisions, do a good job in the recipients, storage and safe use of chemicals, especially toxic, explosive and concentrated acid, alkali and other materials storage, to prevent loss and damage, so as not to endanger personal safety.

8. Professional and technical personnel are responsible for the technical guidance of other personnel in this room and the verification of important test results. The verification of phosphating solution can be carried out by the operator himself.

9. Be responsible for the inspection results.

10, complete other work assigned by the leaders.

Responsibilities of laboratory chemist 1 1 1, responsible for sample sampling and sample preparation;

2, do a good job of inspection and sample retention of raw materials, process products and finished products;

3. Complete the inspection of production process and finished product warehouse on duty, and fill in the records;

4. Ensure the accuracy and validity of test data and fill in quality records;

5. Do a good job in the hygiene and cleaning of the work site.

Responsibilities of laboratory chemists: 12 1. Ensure that the experimental operations, data records and test reports are accurate, and there are no abnormalities or errors;

2, in strict accordance with the testing methods and standards, complete the testing work;

3. Responsible for the preparation, calibration and recording of relevant detection reagents;

4. Ensure that the inspection is completed in time, and the inspection data are filled in and submitted in time;

5. Report any abnormal situation in time;

6. Timely complete sampling, sample arrangement and sample treatment after inspection;

7. Daily maintenance and management of inspection equipment;

8. Implementation of 5S in inspection area;

9, complete other work assigned by the leadership.

;