1. Download and install the software 5 1see to your mobile phone (don't register first, then register in step 8).
2. Open the "Settings" item of the mobile phone and select "WLAN" or "WLAN" to search the surrounding wireless network signals.
3. Find the signal at the beginning of the camera's WIFI signal (C8 1***), select and connect this signal.
—— Remarks: If the camera's WIFI is not found, please make sure that the WIFI switch on the side of the camera is in the Y position; Then when the blue light flashes slowly after the camera is turned on, press and hold the AP key 10 second to reset.
4. Open the monitoring software 5 1see, without logging in, just slide the screen to the right by hand and select "Local Device". You can see the camera name.
-Note: If waiting is displayed all the time, please press and hold the drop-down screen to refresh.
Click on the camera name to see the picture (if you need remote monitoring, please continue the following steps).
5. Click the letter I in the upper right corner of the monitoring screen or the symbol "I" pointing to the right side of the device; Select "Parameter Settings" and select "Wireless" (or wireless network parameters) after entering.
6. Turn on the "WIFI" switch (or turn on the wireless network card mode switch).
SSID: Point to the wireless symbol icon (or the arrow after SSID >); ) Pop up the wifi list and select the WIFI name of your home/company (you can't manually enter the WIFI name! ! ! ); WIFI name cannot have Chinese characters!
-
Password: Re-enter the password of the WIFI selected in the previous step (if the password has letters, it must be case-sensitive! )。
7. Click "Save", generally wait about 10 second, and the software will prompt "Setting succeeded". Wait for half a minute ~ 10 minute, and the blue light of the machine must be on all the time to be truly successful! (If the machine has a card, the blue light stays on for 4 seconds and flashes 1 time to be truly successful. )
8. Open the monitoring software, select the "Register" button at the bottom, and register an account at will (Chinese name is not allowed when registering);
9. Click the arrow in the upper left corner of the software to return to the original menu screen, select "Install camera (or add 1 camera)"-"Add by serial number (camera is online)"-select the string c8 * * * * *, and click "Next" until it is finished.
10. Select "Remote Device" and you can see that the webcam is online. Click the name of the webcam for remote monitoring.
Remarks: If the camera shows bifurcation, please pull down the screen to refresh. If it shows a checkmark, it means you are online.
Extended data:
"Camera Remote Control Software" is actually a remote control software, similar to Grey Pigeon, which uses video equipment (camera, etc. Remote video operation without the consent of the target computer user, aiming at users of instant chat software such as QQ and MSN.
Baidu Encyclopedia: Camera Remote Control Software