What is the command to restore the default configuration of Huawei switch ports?

Is the default configuration command of Huawei switch port to clear the configuration interface? .

Huawei switch ports have three link types: access, trunk and hybrid.

1, access port: it can only belong to 1 VLAN and is generally used to connect computer ports.

2.Trunk port: it can allow multiple VLANs to pass through, and can receive and send multiple VLAN messages. It is usually used in switches and switch-related interfaces.

3. Mixed port: it can allow multiple VLANs to pass through, receive and send multiple VLAN messages, and can be used for inter-switch connection and user computer connection.

Extended data:

Other basic configuration commands of Huawei switch:

1, the system enters the system view.

2. The system view into the system view.

3. Exit and return to the system view

4. Cancel vlan 20 and delete vlan 20.

5, sysname switch naming

6. Display the virtual local area network.

7.vlan 20 creates a vlan (vlan 20 can also be entered).

8. Ports E11to E 1/0/5 Put port 1-5 into VLAN 20.

9.disp vlan 20 shows port 20 in the vlan.

10 and canceling port e1/0 10 mean deleting the current VLAN port10.