In the era of continuous progress, there are more and more places where we can come into contact with job responsibilities, and formulating job responsibilities is conducive to improving work efficiency and quality. So is it really difficult to formulate job responsibilities? The following are the job responsibilities of finished products I have compiled for you, which are for reference only and I hope to help you.

Job responsibilities of finished products 1 responsibilities:

1, responsible for the final inspection of the finished products of the ring network cabinet, and make detailed and accurate inspection records according to the inspection instructions or drawings and related requirements;

2, the quality problems found in the inspection process, timely feedback, and assist the quality engineer to deal with quality problems, to ensure that unqualified not put into storage;

3. Complete the inspection task in time;

4. Actively put forward suggestions for improvement;

Post requirements

1, technical secondary school or above, electrical major is preferred;

2, with high and low voltage network card;

3, need to have more than two years of high and low voltage complete product inspection experience, can understand the primary and secondary schematic diagram;

4. Skillfully use various test equipment: secondary line test platform, withstand voltage tester, loop resistance meter, partial discharge tester, grounding resistance tester, megger, etc.

5, skilled use of office software and other related software applications.

6, serious and responsible, proactive, strong communication skills, strong sense of team;

7. Strong independent problem-solving skills, communication and language expression skills;

Job responsibilities of finished products: 2 1, responsible for confirming the specifications and performance parameters of the first product and checking the consistency of products in the production process;

2. Supervise and inspect the factors affecting product quality at the production site, and verify the improvement effect of abnormal quality; ;

3. Be responsible for abnormal feedback when excessive defects or major anomalies are found during inspection;

4, responsible for recording the working process, statistical analysis of production process inspection data;

5. Be responsible for the management of samples, specifications, drawings, reports, records and other documents in the work area;

6, can consciously abide by labor discipline, consciously abide by the company management regulations, and consciously obey the leadership arrangement;

7, serious and responsible work. Correct attitude, conscientiously complete the tasks assigned by the leaders, help each other, and have the spirit of teamwork.

8. Be responsible for keeping the materials, equipment, tools and materials used by yourself.

9. Seriously complete other temporary tasks assigned by the leaders.

Job responsibilities of finished products 3 1. Confirm the order number, quantity and date according to ERP system to receive materials;

2. Submit the incoming materials to IQC of Quality Department for acceptance according to the order, and record the qualified products into ERP in time.

3. Responsible for filling in the corresponding invoicing forms and data information in time, and inputting them into the ERP system in time to ensure the consistency of accounts and cards;

4. Materials and other departments that meet the production plan receive, supplement and borrow materials and feed them back to MC in time;

5. Responsible for sorting out the related physical objects and materials of substandard goods, and submitting them for purchase, return or exchange;

6, warehouse materials health, safety, cleanliness, in line with safety standards;

7. Responsible for sorting, collecting and reporting the defective items;

8. Assist the warehouse team leader to deal with sluggish materials and inventory warning.

Job responsibilities of finished products 4 1. Have a high degree of professionalism, strictly control all aspects of warehousing, complete procedures, and be a good housekeeper of enterprises.

2. Go through the warehousing formalities, and the workshop shall fill in the finished goods receipt form in quadruplicate, with warehouse keeper 1, statistics 1, workshop 1 and finance 1. The number on the receipt should be accurate and clear, and the name should be filled in by the warehouse keeper, which can only take effect after being signed by the warehouse keeper. Make sure the accounts match.

3. Carefully check the outbound procedures according to the outbound bills issued by the operating room and confirm the financial seal before outbound. The finished products of different quantities and grades must be accurate, and the finished products shall not be changed at will when leaving the warehouse. If the delivery ticket is inconsistent with the product, it needs to be replaced and approved by Manager Meng before delivery. Delayed delivery is not allowed. If the goods are unqualified and cause losses to the company, compensation shall be made according to the value of the products themselves.

4. Losses caused to customers by database errors due to my own reasons: fine 100 yuan, and the round-trip expenses shall be borne by me; If the product is in short supply, it should be compensated according to the value of the product itself.

5. The supply of finished products should be maintained, and the inventory level and quantity should be verified according to the production plan of the office. Finished products without inventory should be reported to Manager Meng and the workshop in time, and production should be carried out according to the task list issued by Manager Meng to avoid product backlog and insufficient supply.

6. If there are unsalable products, report to Manager Meng and sales staff in time to avoid overstocking for too long and causing heavy losses. For the unsalable products in the market, if the backlog exceeds 6 months, it should be reported to the finance and company leaders. If not, 50 yuan will be fined.

7. The daily figures of the finished product warehouse must be clear, and the warehousing situation of the current month should be summarized and reported on the 25th of each month. The monthly summary balance shall be settled according to the financial system. Failing to report in time, delaying financial settlement, and fined 50 yuan.

8. The finished products put into storage in the production workshop should be replaced in time if there is oil leakage or damaged outer packaging during storage, and the product qualification rate should always be 100%. Oil leakage from stock products will not be handled within 2 days, and the penalty will be 100 yuan.

9. All finished products in the warehouse should be kept clean and tidy in appearance, neatly and regularly placed, and have good environmental sanitation. 50 yuan will be fined once for untidy product placement and unclean appearance.

10. Appearance of storage capacity: the ground should be clean. Those who fail to meet the hygiene standards will be fined 10 yuan.

1 1. Be polite to customers who come to visit the factory, answer questions within this range skillfully, and only say sorry to customers for questions outside this range, and strictly keep the company's corporate secrets. If you leave a bad impression on customers, you will be fined 50 yuan.

12. Every day, customers come to the factory to pull goods. No matter when, they must pack the goods to satisfy the customers.

13. Pallets used for loading must be placed neatly after use, and shall not be placed in disorder. Fines 10 yuan.

14. Take a rest once a month according to the regulations of the company, and take more rest 1 day, and deduct the salary of 50 yuan.

15. 50 yuan will be punished for not taking leave, being absent from work without reason and affecting normal work.

16. 50 yuan was fined for not accepting or even exporting the suggestions and criticisms made by customers or salespeople.

Job responsibilities of finished products 5 1. Implement standardized operation related to warehouse in material management to ensure the smooth operation of warehouse;

2. Responsible for the acceptance, warehousing, stacking, storage, inventory and reconciliation of finished products in the warehouse;

3. Responsible for the selection, review, loading and delivery of finished products in the warehouse;

4. Be responsible for keeping the goods and environment in the warehouse clean, tidy and hygienic;

5. Be responsible for keeping and filing relevant documents;

6, warehouse data statistics, archiving, accounting and system data input;

7. Complete other tasks assigned by the supervisor.

Job responsibilities of finished products 6 1, responsible for the inspection of finished products in the workshop after production.

2. According to the technological requirements of products, be responsible for the appearance inspection of finished products.

3, responsible for the screening of finished product models, it is forbidden to mix.

4. Responsible for screening genuine products, defective products and waste products.

5. Be responsible for the classification and identification of unqualified products after screening.

6. Responsible for waste recycling after finished product screening.

7. Be responsible for weighing, bagging, placing identification cards, sealing, packing and packaging qualified products.

8. Responsible for the timely recovery and classified placement of defective products and waste products after packaging.

9. Responsible for the cleaning of each model after packaging.

10, responsible for 5S work in the work area.

Job responsibilities of finished products 7 1. Responsible for receiving and dispatching goods, checking whether the goods are in good condition, whether the specifications, models and quantities conform to the purchase order, coordinating with the receiving department, scheduling the production materials, understanding the financial knowledge, and independently completing the warehouse entry and exit ledger.

2. Ensure the safety of storage places, be responsible for the orderliness, safety, integrity and effectiveness of material management, manage the storage of spare parts and materials by region, ensure the appearance of storage capacity, report the inventory quality and the distribution of dull and overstocked materials on a regular basis, and fill in and submit an application form for the disposal of dull and scrapped materials on a regular basis as required.

Job responsibilities of finished products 8 1. Establish and improve the finished product warehousing process, input warehousing documents into the computer system, and form daily warehousing reports.

2, together with the superior leadership is responsible for the finished product inventory on time, and make inventory table submitted to the finance department.

3. Be responsible for checking the completeness of the outbound procedures, and checking the varieties, specifications and quantities required by the finished products to be shipped and the sales invoices.

4. Be responsible for the storage of the door key and the door switch of the finished product warehouse during work.

5. Be responsible for keeping all incoming and outgoing documents in the finished product warehouse, and timely delivering and recycling them.

6. Based on the principle of "region and location", the finished products are stored by location, and the material cards and location marks are registered.

7, according to the sales situation combined with the provisions of the inventory standards to the sales department to adjust, control inventory, timely delivery advice.

8. When it is found that the quantity on the receipt/delivery documents is inconsistent with the real thing, communicate with the responsible person for confirmation in time.

10, responsible for supervising the implementation of the first-in-first-out principle for finished product shipment.

1 1, be responsible for the turnover process of finished products carefully, and the stacking height of finished products shall meet the product characteristics and company requirements, so as to ensure that the product quality status will not change.

12. Complete other tasks temporarily assigned by superior leaders and assist other warehouse personnel to complete the tasks.

Job responsibilities of finished product 9 material management

(1) All materials in the warehouse shall be properly kept, and the individual shall be responsible for the scrap and damage.

⑵ We should be thrifty, repair the old and make use of the waste, put an end to the ever-burning lamps, and turn off the lights at any time after leaving the museum, so as to "put out the lights when people walk".

(3) Strictly manage the warehouse door. It is not allowed to be opened for a long time, and the goods should be switched in and out of the warehouse at any time. The warehouse door requires flexible account opening and tight closing to prevent hot entry and cold exit; If the walls and doors of the warehouse are damaged, find someone to repair them in time.

(4) In the operation of the warehouse, vehicles and commodities should be prevented from colliding with the warehouse walls, doors, refrigeration system and peaceful management. Protective devices should be installed in places where collisions are easy to occur.

5] When the goods enter the factory, they shall be weighed, unloaded, inspected and positioned according to the procedures; Receiving goods, hygiene, cleanliness and safety are all the responsibilities of warehousing, and everything is neat and orderly.

[6] Establish a commodity card protection system, fill in cards according to the stacking quantity, variety, quantity, grade, quality and packaging, as well as the dynamic changes of incoming, outgoing and storing, and hang them in obvious places. .

Once the materials are placed reasonably and arranged correctly, the effective volume is used to expand the capacity of the cargo stack. However, it is necessary to ensure that the goods are not damaged (that is, reasonably arrange the position and stacking height of the goods). Goods should be piled up firmly and neatly, which is convenient for counting and inspection, and easy for entering and leaving the warehouse.

Damaged, overflowing, damaged and imprecise outer packaging should be repaired in time to ensure the basic quality of materials.

⑼ Check the quality of the goods when warehousing, and those who fail to meet the requirements are not allowed to warehousing. Check the quantity when warehousing, fill in the receipt and issue list, and report to the superior in time if there is any situation.

⑽ At the end of each month, statistics should be made in time to summarize the inventory quantity and goods in and out of the warehouse at the end of that month, and ensure accuracy.

2. Health management

(1) The sanitation in the warehouse should be checked and cleaned every day, and the corridor should be cleaned at least twice a week. There shall be no accumulated water, scraps of paper, cigarette butts and other sundries within 5 meters in front of the warehouse, corridor and door, and they shall be cleaned up in time if necessary.

2 warehouse disinfection at least once a week, empty warehouse should be cleaned and disinfected in time before use, and open the warehouse door as required.

(3) Employees often have their hair cut and disinfected. Wash your work clothes when you leave, check your health regularly, and clean and disinfect your work clothes regularly. When they leave, they should take off their work clothes and white coats.

3. Others

(1) Always learn and master the knowledge of warehousing materials, report the problems found in time, report the damages in time and handle them in time.

(2) Have a sense of responsibility, be dedicated, and be serious and responsible during work.

Job responsibilities of finished products 10 responsibilities:

1. Abide by the company's rules and regulations and obey the arrangement of superior leaders.

2. Be responsible for the quality control of products produced by the company, and conduct the first inspection, inspection and sampling inspection of semi-finished products as required.

3. Monitor foreign bodies to prevent unqualified products from flowing into the process.

4. Accurately record the product quality status, and timely complete the first article signature record and process inspection record.

5. Identify the quality status of process products timely and accurately.

6. Supervise and guide employees' working methods to ensure that employees work in the right way.

7. Supervise the stacking mode of materials in the workshop and report the unreasonable stacking situation to the production unit.

8. Complete the tasks assigned by superiors in time.

Requirements:

1, junior high school education or above, age 18-30 years old, male or female;

2. Relevant working experience is preferred, familiar with quality work;

3. Can work in shifts. Flexible, diligent and stable.

Job responsibilities of finished products 1 1 responsibilities:

1. Complete product inspection in time.

2. Make inspection records and complete data analysis in time.

3, in strict accordance with the requirements of finished product inspection; 100% inspection shall be carried out one by one for the specified inspection items.

4, in the process of inspection, if there is a mass quality accident or abnormal quality, should be timely feedback to the production workshop, in order to find the problem in time, timely treatment; At the same time, analyze and summarize the bad reasons, put forward their own opinions and participate in quality management.

5. Assist the superior to investigate and analyze quality defects or quality accidents, and put forward specific corrective and preventive measures and handling opinions?

6. Maintain and properly keep the monitoring and measuring equipment in use. Check before use to ensure the accuracy of the testing equipment. If there is any deviation, timely adjust or send it for repair, and make inspection records?

7. Complete other tasks assigned by superior leaders.

Qualifications:

1, college degree or above, major in mechatronics and other related fields;

2, understand the theoretical knowledge of electronic appliances and machinery, more than 2 years of relevant work experience;

3. Steady and down-to-earth, strong sense of responsibility and principle, love quality inspection work, and can actively and timely complete the work arranged by superiors;

Job responsibilities of finished products 12 In order to further standardize the management system of the company, strengthen the sense of responsibility of managers and make the job responsibilities of managers more specific, the following job responsibilities are formulated:

First, do a good job in the data management of finished product warehousing, establish the identification and system account of finished product inventory, and provide timely and accurate reports for the finance department and the sales department.

Second, establish and improve the procedures for the delivery, warehousing and warehousing of finished products in the warehouse, write the delivery and warehousing documents truthfully, and form the delivery and warehousing report.

Third, do a good job in the warehousing acceptance of finished products, classify and stack the warehousing name, specification, model, unit and quantity of each batch of finished products, and indicate the identification and warehousing date.

Four, delivery, must strictly review the integrity of the procedures, examination and approval procedures are not in place, will be rejected. Do not leave your post without authorization during working hours.

5. Be responsible for checking the completeness of the outbound procedures, and checking the varieties, specifications and quantities required by the finished products to be shipped and the sales and delivery units.

6. Responsible for the ledger registration of finished products in and out of the warehouse, and establish a dynamic spreadsheet management system connected with the warehouse department.

Seven, responsible for the safekeeping of the key to the finished product warehouse, so that people can open and close the door. Do a good job in security inspection such as theft prevention, moth prevention, rat prevention, mildew prevention and fire prevention at any time. And ventilate and dry the warehouse at any time according to the weather conditions to ensure that the finished products in the warehouse are neatly stacked and clean and flat.

Eight, responsible for the storage of finished warehouse receipts, and timely delivery and recycling, according to the production and sales situation combined with the prescribed standards at any time to the warehousing department, sales department to adjust, control inventory, timely delivery recommendations.

Nine, responsible for the storage time of finished products, arrange the stocking according to the approved invoices, and be responsible for supervising the implementation of the principle of first-in first-out of finished products.

Ten, responsible for the finished product turnover in the process of careful handling, finished product stacking height in line with product characteristics and factory requirements of supervision, to ensure that product quality does not change.

1 1. Be responsible for carefully reviewing the sending and receiving documents. If it is found that the quantity on the receipt and delivery documents is not in conformity with the real thing, communicate with the responsible person for confirmation in time and report it if necessary.

Twelve, have the right to refuse the procedures are incomplete, inconsistent quantity, unqualified products out of the library; Have the right to ask the handling personnel to place and move the products reasonably according to the designated location.

XIII. Be responsible for the timeliness and accuracy of the finished product warehousing report; Responsible for the accuracy of monthly inventory report and reasonable analysis of the situation; Responsible for the losses caused to the company by improper storage of the key of the finished product warehouse door; Responsible for the losses caused to the company due to the discrepancy between the delivered physical quantity and the document quantity; Responsible for the losses caused to the company by improper storage of all incoming and outgoing documents in the finished product warehouse.

Job responsibilities of finished products 13 1. According to the material arrival plan, formulate the department receiving plan and work arrangement, and supervise the implementation;

2, responsible for the implementation and revision of the department's work norms;

3, responsible for the production department and all recipients department acquisition plan and work arrangement, and supervise the implementation;

4. Responsible for timely and standardized delivery;

5. Responsible for supervising the material management of each warehouse;

6. Be responsible for the management of warehouse materials and the accuracy of data;

7. Inter-departmental cooperation and coordination;

8. Other matters assigned by the leaders.

Job responsibilities of finished products 14 1. According to the requirements of the company's quality management system and inspection documents, actively carry out inspection activities and take direct responsibility for the quality of finished products.

2. Exercise inspection function to prevent unqualified finished products from being put into storage and delivered for use.

3. Study hard, take an active part in training, improve the professional level, and avoid mistakes and missed inspections.

4. Strictly implement nonconforming product control procedures to identify, isolate and dispose of unqualified finished products.

5. Carefully make inspection records, and timely feedback and report information to relevant personnel, relevant departments and leaders.

6. Actively cooperate with relevant departments to carry out production and quality management activities to avoid the phenomenon that warehousing and delivery are affected by stress inspection.

7. Use and keep the testing instruments, relevant documents, seals and records correctly.

8. Often go deep into the production process to grasp the fluctuation of product quality, stop the behavior that may cause unqualified products in time, and strive to give priority to prevention.

9. Participate in the review and verification of nonconforming products and their corrections and corrective measures. Have the right to dispose of minor nonconforming products.

10. Complete other related work arranged by the leader.

Job responsibilities of finished products: 15 1. Ensure that the management area is clean and tidy, and articles are neatly stacked.

2. Receive, distribute and put into storage (glove core) in strict accordance with the company system, and make relevant records (the materials have passed the quality inspection). When warehousing goods, the quality control department shall be notified to carry out quality inspection. Only when they are qualified can they be put into storage, check whether the quantity is accurate, and calculate the record ledger, and resolutely refuse to sign unqualified products.

3. Reasonable arrangement of inventory plan. First-in, first-out principle, keep the accounts clear (daily update of manual ledger and electronic ledger, synchronization of data with ERP system)

4. Timely count the number of rejected defective products, record them in the accounts and send them out to the warehouse.

5, according to the provisions of the company to keep inventory items, real-time grasp the inventory situation, to ensure that the accounts are consistent.

6. Change the number and inventory account on the savings card in time to ensure that the card is consistent, the account card is consistent and the account is consistent.

7. When the goods are delivered out of the warehouse, the delivered quantity can only be delivered out of the warehouse after being signed by the consignee, and the ledger is recorded in time.

8. Complete the tasks assigned by superiors in time.

;