Current location - Quotes Website - Collection of slogans - How to prevent the circuit from aging and catching fire?
How to prevent the circuit from aging and catching fire?
Preventive measures for circuit aging and fire;

1. Don't connect the power supply privately to prevent the current overload caused by the private power supply from causing a fire.

In fact, many people sometimes find a place to connect electricity for their own convenience, so they connect the power privately. Private power supply will affect the original layout of the room. Private power supply will cause excessive indoor load and the line will easily trip. Because the original layout is where the house is planned to be built, it is reasonable. If the situation is serious, private power supply may produce sparks.

2. Do not use damaged plugs and sockets to prevent leakage.

Once the plug is used for a long time, it will be damaged. Some people are very frugal, and they are reluctant to lose them when they find them. Or some people are usually careless and don't always pay attention to whether the plug or socket is damaged. Especially after contact with water, if people accidentally touch the damaged place, they will be easily injured by electricity. If you get an electric shock, you should see a doctor as soon as possible.

Don't buy and use inferior electrical products, choose a brand certified by the state.

Many people like to buy some "three noes" products without quality guarantee in order to be greedy and cheap. "Three noes" products will lay a great hidden danger for future fires. Different from brand electrical appliances, brand electrical appliances are certified by the state, with good quality and quantity. Perhaps the price of branded electrical appliances is a bit expensive, but how can our health and safety be measured by money? Because it is cheap, it hurts itself, and it is not worth the loss.

4. Don't use aging wires without exposed insulating materials at the joints.

There are also bare threads, which are basically used for a certain number of years and burned the thread of the coat. Once the wire insulation is found to have burnt marks, it should be thrown away as soon as possible to avoid excessive resistance, wire heating, or fire at the joint, which will cause combustible materials to catch fire.

5. Prevent electrical appliances from being energized for a long time, and turn off the lights as far as possible when people walk to eliminate hidden dangers.

Many people have the habit of not unplugging the socket switch or plug at night, but this habit is not good. Let alone the extra power consumption. If you are not at home or sleeping at night, people will not notice the fire at this time, which is often because people don't pay attention. Hidden fire may burn down the house, so you must use electricity safely.

6. The socket must be placed in a safe place with reasonable wiring. Try not to touch flammable materials.

Try not to put anything around the socket, and pay attention to flammable materials (paper) falling into the wire hole inside the socket. Bian Xiao suggested that you can buy a safe plastic shell for protection, especially in toilets and showers. The more likely it is to get into the water, the more attention should be paid. Or install the socket higher, and put it on the ground at will, for fear that the child's fingers will stick in.

7. You should try to buy thick wires and avoid thin wires.

First, it can increase the load, fearing that you can't afford to bring home appliances. Second, it can effectively prevent the line from aging. Under a certain intensity of use, the thin thread coat is definitely easy to expose. Once exposed, it greatly increases the probability of fire. Although buying thick wires is a bit expensive, safety is more important.

8. In case of electrical fire, cut off the power supply immediately.

If you can cut off the power supply, pull down the gate immediately. When the power supply cannot be cut off, you should dial 1 19 and 1 10 quickly to put out the fire with a non-conductive fire extinguisher. Be careful not to use water and foam extinguisher. Don't pour water on electrical appliances or switches when the power supply is not cut off. If the appliances are still on fire, don't touch them with your hands.

9. According to the fire situation, improvise

If a fire hazard is found, it should be put out in time. If it cannot be put out, the residents in the building should be evacuated urgently; Or mobilize other residents to put out the fire and try to minimize the losses.