1. Responsible for incoming inspection of outsourced parts to prevent unqualified materials from flowing into the production line. Check the delivery note, check whether the material has product identification, confirm its name, quantity and specification, and conduct a single sampling according to the general inspection level of MIL-STD- 105E. (AQL:0 mA: 1.0 mA: 2.5)
2. The incoming materials were inspected on the same day, and there were no special circumstances. The inspected materials shall be inspected accordingly.
Record: those who pass are put into storage; Materials that need to be specially selected can only be specially selected after being confirmed by the supervisor and reviewed by the manager.
And make corresponding identification; Unqualified products should be placed in the unqualified product area, and unqualified materials should be delivered in time.
Report, confirmed by the supervisor, reviewed by the manager, and send the abnormal report to relevant departments according to the final processing result.
3. All incoming materials must be inspected according to incoming inspection standards, samples and drawings, and the quality inspector must properly protect them.
Manage your own samples and drawings.
4. Treat all suppliers' material inspection results fairly and fairly, and feed them back to relevant departments in time; Respect for supply
Do business, be polite to people and establish a good corporate image.
5. Responsible for the quality inspection of semi-finished products in injection molding workshop, and check and record them regularly; Eliminate unqualified
Semi-finished products enter the warehouse or flow into the installation workshop.
6. Be responsible for the first inspection of the products or semi-finished products produced, and normal production can be carried out only after passing the inspection; If the inspection is unqualified, the production can be continued only after the installation workshop is rectified, and the first piece inspection record should be made. correct
Inspect and record the product quality of each production process.
7. Don't do anything unrelated to work during working hours, and don't be late for work, leave early, or be absent from work.
8. Complete other tasks assigned by superiors.
The above is an overview of the incoming inspection of factory production, but no matter what industry you are engaged in as a quality inspector, the above steps are similar. Quality inspector is the key link to grasp quality. If the incoming materials are not inspected in this step, it may cause a lot of cost waste and reduce the profit of the enterprise.
To be a good quality inspector, as long as you do the prescribed things well and abide by the company's routine system, you are a qualified quality inspector. I used to be a quality inspector, and I think working hours are more meaningful, which can reduce many losses of the company, but now working in Xue Xin University is more meaningful. I hope we can all do better here and hope to pass it! !
Question 2: How to be a good inspector and manager 1? In order to become a qualified inspector, we must study hard and strictly control according to the engineering quality management regulations and acceptance specifications formulated by the state and the Ministry of Construction, as well as the requirements of the 2000 edition standard and enterprise quality management system. Participate in the preparation and implementation of construction organization design (construction scheme) or quality plan.
2. Participate in the blue prints.the design and design disclosure organized by the company before commencement, and be responsible for the construction technical disclosure of the labor service team. Perform quality acceptance procedures for all kinds of materials needed for construction, and assist material engineers to mark the materials on site and keep all kinds of quality certification materials;
3, responsible for the inspection and test of each working procedure in the construction process, so as to sample for inspection according to the specification requirements and receive the test results in time;
4. Strictly control the construction of each working procedure according to the specification requirements, and timely dispose of the found quality defects according to the nonconforming product control management procedure; Actively cooperate with the site supervisor to inspect the project, provide necessary information and data, and participate in the final inspection and test of the project.
5. Certification and sorting out all technical data of the project. Within 0/5 days after the completion of the project, the qualified and complete engineering data will be submitted to the supervision center for review, and then bound up and filed.
Second, looking forward to the future, being a quality inspector should raise awareness.
1, control the quality point.
In the process of construction, we should choose those objects whose quality is difficult to guarantee, which have great influence on quality or are harmful when quality problems occur as quality control points.
(1) Key working procedures or links in the construction process and concealed works.
(2) Weak links in construction, or processes, parts or objects with unstable quality. Uneven kerbs, surface joints, etc. ).
(3) Processes, parts or objects that have a significant impact on the quality or safety of subsequent engineering construction or subsequent processes.
(4) parts or links where new technologies, new processes and new materials are adopted. (Micro cracks, modified asphalt rubber asphalt, etc. )
(5) The procedures or links with insufficient grasp, difficult construction conditions or technical difficulties in construction.
Pay special attention to the above parts, make records and records of making plans, and understand the inspection situation of each process. Only when we have a good idea can we find problems in the construction.
2, diligent in inspection, good at inspection.
A qualified quality inspector should be diligent in on-site inspection. You can't find problems behind closed doors, and you can't find all the problems by doing things with experience, because every day is new and new problems occur every day. Therefore, the quality inspectors must go deep into the site, take a walk and check it again, and find something in the daily inspection and gain something. In addition, we should be good at inspection and form our own inspection procedures and methods. Handle the relationship with the superior and the construction team, strengthen your own beliefs, implement a one-vote veto, and never tolerate it. We must adhere to the principle of quality first, keep in mind the company's quality declaration, and will never tolerate situations that damage quality. Whoever violates the quality will fight to the end.
3. Strong sense of responsibility, impartiality, no feelings and no fear of offending people.
Quality inspectors should have a strong sense of responsibility and check each post in strict accordance with various standards and company rules and regulations. Don't let go when problems are found: (1) Don't let go until the cause of the accident is found out; (2) The parties and the masses are not educated; (three) the person responsible for the accident has not been dealt with; (4) Failing to formulate feasible preventive measures. In the daily inspection, handle affairs impartially, do not mix personal feelings, and do things right and not people. Only in this way can quality inspection play its due role.
4, each link is perfect, providing reliable guarantee for the project.
All raw materials, semi-finished products or components transported to the construction site shall be submitted to the project supervision agency for approval before entering the site, with the factory certificate and technical specifications attached. The construction contractor shall conduct inspection or test report according to the specified requirements, and the quality of raw materials, semi-finished products or components shall be checked and confirmed by the supervision engineer before entering the site. The storage conditions of materials, components and accessories shall meet the relevant requirements.
For some local materials and products prepared on site, the contractor is generally required to carry out tests in advance, and construction is allowed only after reaching the required standards. For key processes such as surface construction and concrete construction, the quality inspector must be on the sidelines to assist the project manager to solve unexpected problems in the construction process in time, so as to keep the phase ...
Question 3: How to make a good overall description of the post of quality inspector 1;
1. 1 Responsible for product quality inspection during product production.
2 post setting purpose:
2. 1 in order to control the production quality of products.
3 work objectives:
3. 1 Realize product quality control in all aspects of production and processing.
4 management authority:
4. 1 executive power: the right of independent inspection of product quality in the process of product manufacturing; Exercise the right of product quality recognition according to technical documents.
5 job responsibilities:
5. 1 Abide by various management rules and regulations;
5.2 Obey and accept the leadership and management of superiors, and finish the assigned work on time;
5.3 Be responsible for the product quality inspection in the product manufacturing process, and complete it at any time, and be responsible for the quality inspection and product missed inspection;
5.4 Record the product quality and be responsible for the integrity of the record (see the quality manual).
6 working relationship:
6. 1 Responsible for the quality manager;
6.2 Accept the production business guidance of the business department;
6.3 Coordinate the working relationship with production departments and operators;
6.4 Coordinate other business relationships in the process of work.
7 work characteristics:
7. 1 environmental characteristics: on-site office, high salary.
7.2 Work characteristics: high technical requirements and strong study and research.
7.3 Time characteristics: fixed working hours.
7.4 Balanced features: Balanced work intensity.
7.5 Initiative features: active work is the mainstay.
8 qualifications:
8. 1 Basic conditions:
8. 1. 1 education background: technical secondary school or above, major in plastic molding, mold manufacturing or related fields.
8. 1.2 ideological and moral character: serious and down-to-earth work, with the spirit of study.
8. 1.3 Age Body: over 30 years old, in good health.
8. 1.4 experience and achievements: engaged in plastic molding and processing for more than 5 years.
8. 1.5 personality: calm.
8. 1.6 adaptability: strong.
8.2 Skill requirements:
8.2. 1 cooperation ability: be able to actively cooperate with production operators to complete the work.
8.2.2 Control ability: Have the ability to guide the operators to complete the work according to their technical requirements.
8.2.3 Learning ability: actively learn new knowledge and apply it to practical work.
8.2.4 Communication ability: Listen to the opinions of production personnel and improve them in work.
9 should know:
9. 1 product:
9. 1. 1 Understand the injection molding process characteristics of thermoplastic materials;
9. 1.2 Understand the system structure and working principle of injection molding machine;
9. 1.3 Understand the structures of various injection molds;
9. 1.4 Understand the functions and uses of various products.
9.2 Marketing:
9.2. 1 Basic knowledge of product sales: customer maintenance, after-sales service, product reputation and brand image.
9.3 computer
9.3. 1 Common knowledge of network application: the function and application scope of enterprise LAN, the key points of LAN maintenance, the concept of network security, and common data communication methods.
9.3.2 Basic knowledge of computer application.
9.4 Legal aspects:
9.4. 1 product quality law: legal subject and legal jurisdiction, main legal contents and legal responsibilities.
9.4.2 Consumer Protection Law: legal subject and legal jurisdiction, main legal contents and legal responsibilities.
9.4.3 Labor Law: legal subject and legal jurisdiction, main legal contents and legal responsibilities.
10 should be able to:
10. 1 product:
10. 1. 1 Master the inspection methods of various processed products and the use methods of various commonly used inspection tools;
10. 1.2 master the technical standards and quality requirements of various products;
10. 1.3 can judge the manufacturing quality, existing problems and improvement measures of process equipment such as plastic molding through inspection;
10.2 computer:
10.2. 1 master the use of office software.
10.3 legal aspects:
10.3. 1 master the main terms of the product technical agreement;
10.3.2 master the key terms of the labor contract.
1 1 Daily work contents:
1 1. 1 in the morning:
1 1. 1 Understand the work items to be handled and handle them in time.
1 1.2 daily:
1 1.2. 1 patrol and sample by frequency ... >>
Question 4: How do you do a good job as a quality inspector? To be a good quality inspector, you need to do the following: 1. Under the relative standards or requirements, urge the production to adopt correct or improved methods continuously, so that lazy people can make continuous progress in management and technology, thus improving the production level and improving the efficiency of enterprises.
2. As a quality inspector, you must have good psychological quality and excellent professional knowledge.
Be familiar with the performance, function and quality standard requirements of products, understand the requirements of users and the latest changes in the product market, and should have the ability of data analysis to feed back the changes in product quality to production and superiors.
There is inevitably a contradiction between quality inspection and production. Quality inspection is to maintain the company's quality from the customer's point of view and create benefits for the company while maintaining the company's image. Data and facts are the basis that quality inspectors must master, and they can't be subjective.
Don't put off what you can do today, do it right away.
Question 5: How to be a good quality inspector? As a quality inspector, we should do a good job in quality inspection of various products. Ensure the qualified rate of various products and ensure the health and satisfaction of consumers. There is a long way to go, but I don't know that the real success lies in the continuous decline of market feedback rate, the continuous reduction of return volume and the continuous expansion of market business. To this end, I think we should do the following:
1, conscientiously implement the standardization system of quality management system, firmly establish the quality policy of "product quality is no small matter, food safety is as big as the sky", fully understand the seriousness of current product quality competition, strengthen product quality inspection with a pragmatic style, and take effective measures to ensure product quality without hidden dangers. 2. Intensify the investigation and punishment of quality accidents. Adhere to the principle of strictness and fairness, and give decisive feedback on all kinds of quality accidents caused by inadequate quality management, failure to implement quality control measures, failure to implement hidden dangers rectification, violation of production technology and other reasons. Please report the serious cases. 3. Strengthen the analysis of market feedback and return, and investigate the root causes so as to control and eliminate them in practical work. 4. Cultivate your own insight and sensitivity in your work, so as to nip quality hidden dangers in the bud. The problems found should be reflected to the staff and cadres, and good control suggestions should be provided to them, so as to improve the attention of the staff and workers and the smooth development of the next work. 5. Publicize the importance of quality, instill quality awareness in employees, and announce the existing problems and solutions in the previous stage through the opportunity of holding regular staff meetings every Friday. We should put the slogan "Shuanghui is in my heart, quality is in my hands" into people's hearts, put the message "Everyone creates quality and everyone enjoys quality" into action, and earnestly implement quality.
As a quality inspector, you should have a sense of crisis. Without long-term consideration, there must be short-term consideration. This is not the responsibility of the leader, but the responsibility of all our quality inspectors. An entrepreneur who made a comeback spoke his mind: "There will never be a market for products without quality. The loss of market by enterprises is as terrible as the loss of territory by a country. " This statement is by no means alarmist, but the heavy experience he gained with his bitter failure, and it is also the competition in the WTO international market, that is, the competition of product quality. Therefore, the enterprise requires us not to be blindly optimistic and arrogant at night. Always have a sense of crisis, turn the crisis into motivation, go all out and do things for the enterprise with high efficiency and low cost. Always remember: we must create more wealth for the company than it pays us, otherwise, we will face the threat of re-employment.
As a quality inspector, we should keep learning. Going deep into the production line, I realized the difficulty and helplessness of "books are not so annoying when used". Therefore, I must keep learning, navigate myself with knowledge, enrich myself with practice, learn from old quality inspectors, monitor and technical supervisor, especially from excellent front-line employees. Listen to their suggestions with an open mind, understand and summarize their information, so as to improve their quality and professional level.
As a new quality inspector, on the basis of learning, we should innovate constantly, make bold breakthroughs and pursue Excellence. Specifically, we should gradually approach the goal through continuous quality improvement. Promote beneficial changes from the organization and achieve the expected results.
Question 6: How to be a quality inspector? Quality inspector is a very important but disgusting job. Personally, it should be like this:
1, can bear hardships and stand hard work. If you want to have a high pass rate of the products you are responsible for, you must randomly check some of them on the basis of the sampling ratio to ensure the accuracy of the information.
2. Master the technical standards of your industry and the quality requirements of the company.
3. Do a good job in the maintenance of measuring tools. Only with good tools can we produce good products.
4. Pay a sense of responsibility.
5. If you want to get ahead in quality inspection, it is recommended to master ISO900 1 quality management system standard, which is a necessary condition for job promotion.
6. Remember the most important point: whoever pays you is responsible! When the boss pays you, you must be responsible to the boss, save face among your colleagues, and don't be afraid of offending people, especially some old employees. A smart boss knows that as long as every product you test is worthy of the boss, he won't be too bad to you.
7, colleague relationship, there is no friendship at work, just a simple colleague relationship, everything according to the system; Outside of work, you can explain the contradictions at work, and it is someone else's business to listen or not. Remember, your own destiny is in your own hands.
Question 7: If you are a quality inspector, how should you do a good job in quality? 10 to make personal suggestions for quality inspectors, you can always work hard in the following aspects:
Have the basic qualities of a quality inspector, such as carefulness, patience, insight, observation and coordination;
Familiar with the process of related products and the methods and operations of inspection and testing, and be able to operate the corresponding inspection instruments and equipment skillfully;
Study hard and master basic quality methods and tools. For example, seven methods of QC and the handling of quality anomalies;
Complete the work arranged by the supervisor and be proactive in the * * * group.
Question 8: How to be a qualified quality inspector should first love this job, then take it seriously and have a sense of responsibility, and finally keep learning and enrich your knowledge. I wish better development in the future!
Question 9: How to do quality inspection 1? Inspectors should be familiar with and understand the product drawings and process documents, and understand the structure, performance and use requirements of the inspected products.
2, according to the technical standards for product quality inspection.
3. Strictly inspect the products, and the inspector has the right to put forward constructive suggestions to the relevant departments on production conditions, materials used and inspection equipment according to the quality requirements of the products being inspected.
4. Inspectors have the right to refuse to inspect some irresponsible and shoddy products that seriously violate the technical requirements.
In order to avoid a large number of defective products.
5. Provide quality feedback data to relevant department leaders and production workers; According to the problems existing in products or parts, analyze the reasons and put forward suggestions for prevention and improvement for the reference of competent leaders and leaders of relevant departments.
6, according to the process flow card, technical standards, completes the inspection records of each project, to prevent false inspection, missed inspection, timely find the defective products and make a good mark, request and urge manufacturers to take effective measures to carefully manage, to prevent the occurrence of defective products.
Unqualified products are mixed with qualified products, which leads to quality hazards.
7, issued by the product or component quality certificate.
8. Guide and manage the inspection work of members.
9. Complete other tasks assigned by superior leaders.
10, responsible for the inspection results.
Question 10: How to become a qualified quality inspector depends on what kind of quality and technical inspection work you are engaged in. Different industries have different requirements! To be a qualified quality inspector, you must be principled, understand the overall situation and have enough understanding of the quality needs of customers, so as to ensure that the company can produce products that customers are satisfied with and that the products detected can satisfy customers! Secondly, you should master more foreign or domestic product quality inspection standards and rules, so that as a quality inspector, the products you test can not only reassure customers, but also become a convincing basis for customers to ask questions.