Settings "(BIOS settings). Find the boot sequence in it.
(some are the first.
Basic Input/Output System
Device), through PgUp
Or PgDn selects the CD. Press Esc, and then press F 10 to open a dialog box. Press the Y key to enter and save the settings.
2. Insert the XP installation CD into the CD-ROM drive, and then restart. When you see the CD ... press enter at the bottom of the screen in time, otherwise the computer will skip the light and start from the hard disk. After the XP system disk lights up, start installing programs, copy files, load hardware drivers, and enter the Chinese interface of the installation wizard.
Please note that the following installation tasks can be successfully completed as long as you follow the installation instructions.
Roughly as follows: XP system protocol, target disk, format partition, copy file, input serial number and computer information, press enter, etc. , restart and then enter the XP desktop.
3. At this time, the desktop only has the recycle bin shortcut icon and taskbar. Right-click on the desktop and select Properties-Display-Customize Desktop to view my computer, online neighbors, etc. , and then click OK to return to the desktop.
4. Whether the test run is normal. If there is no sound or the display is abnormal, right-click my computer and select Properties-Hardware-Device Manager-the option with a yellow question mark or exclamation mark in front of it represents unrecognized hardware without driver installed. Right-click to select the reloaded driver, insert the corresponding driver CD, and select automatic installation, and the system will automatically identify it.
Use the above method until all the previous "question marks" disappear. Drivers that need to be installed generally include video cards, sound cards, network cards, cats and other drivers.
5. Some optimized settings of the system.
( 1)
Right-click the screen and select Properties. Click the "Appearance" tab, select "Windows Classic Style" in the "Appearance and Buttons" drop-down menu, and then in the "Settings" tab, adjust the case of the screen resolution according to your personal preference, generally 1024×768. If you use an ordinary CRT monitor, you need to click the "Monitor" tab again, adjust the "Screen Refresh Frequency" to "75-85 Hz" and confirm.
(2)
Right-click the taskbar, select Properties, and select the check box before Show Quick Launch in the Taskbar tab. Then click the Start Menu tab and change the menu category to Classic Start Menu and OK.
(3)
Right-click my computer and select the Advanced tab. Click the Settings button in the performance item. Click "Adjust to Best Performance" in the visual effects item, and then select "Use common tasks in folders" from the following options. Then click the Advanced tab next to Visual Effects, and click the Settings button under Virtual Memory. In the opened property box, first position the cursor on drive C, click "No Paging File" below, then click drive D, enter the corresponding value in the custom size, click the "Set" button next to it, and then click OK. The setting of virtual memory is generally 0.5-3 times that of 65438+ physical memory.
(4) Establish a network connection and start it.
-Connect to-Show all connections-Right-click Local Area Connection in the dialog box that opens-Properties-Settings.
6. Install antivirus software and common software.