Current location - Quotes Website - Excellent quotations - Laboratory Technician Competition Speech
Laboratory Technician Competition Speech

A speech is a highly practical document and a written material prepared for a speech. In this new era of rapid change and constant transformation, speeches are used more and more often. So the question is, how to write an appropriate speech? The following is a transcript of the competition speech for laboratory technicians that I compiled. You are welcome to learn from it and refer to it. I hope it will be helpful to everyone. Laboratory Technician Competition Speech 1

Dear leaders:

Hello!

A few days ago, I was fortunate enough to participate in the competition, which accumulated experience and laid a solid foundation for this deputy position competition. This time, I am even more confident to participate in this competition.

The position I am competing for this time is: Deputy Director of the Laboratory Center.

My name is XXX, female, 37 years old, with a college education. I entered the factory in January 20xx and have been working in the laboratory until now. I have studied and trained in Pingdingshan Gangue Power Plant and Hunan Central South University, and now I am working as a laboratory technician. Deputy Director. The position I am competing for is the deputy director of the Laboratory Center.

I am competing for this position mainly because I have the following advantages and abilities:

1. Have good political and ideological qualities and a strong sense of professionalism.

The company established a central laboratory in 20xx. I have experienced the process of the laboratory starting from scratch and continuing to develop and improve. During this period, I strictly demanded myself at work, and through continuous learning and progress, I formed a good political, ideological and moral style and moral cultivation. No matter what difficulties or setbacks I encounter, I insist on putting work first, working tirelessly, never caring about personal gains and losses, and always maintaining a positive, hard-working, and down-to-earth mental state because I love my job.

2. Have strong professional knowledge and rich practical experience.

Because I have been engaged in laboratory analysis for a long time, I have profound theoretical knowledge and rich practical experience. The alumina plant was put into operation in 20xx. I cooperated with the laboratory director to participate in the debugging of all laboratory equipment and the determination of solution concentration, which was effectively implemented. In 20xx, the lime kiln was put into operation. I learned from the limestone analysis method of XXXX Company and combined it with the actual situation to formulate the company's limestone analysis plan, which was effectively implemented and saved the company thousands of yuan in outing training expenses.

In 20xx, by drawing on the current national standards used by the XXX Group and the XXX Quality and Technical Supervision Bureau, the coal calorific value analysis method was improved in a timely manner, and the coal received base low calorific value calculation method was used to conduct coal quality evaluation. Laboratory analysis. Prior to this, the company's coal calorific value standard had always been high calorific value. On average, per ton of commercial coal, the company's calorific value laboratory analysis results are 1,000 calories/g higher than the laboratory analysis results of the same industry. By revising the coal calorific value analysis standard, the company can save about 5 million yuan in monthly costs. Since the total water content of the coal is inversely proportional to the low calorific value received, the coal moisture is effectively controlled and energy consumption is reduced. In the same year, it was rated as "Pacemaker in Energy Saving and Consumption Reduction" by the company. In 20xx, "process management and laboratory analysis accuracy" was regarded as the top priority of the work, and the refined management of the analysis process was strengthened to improve the quality of work. This year, on March 16, the method of retaining 4 decimal places for the molecular weight of calcium oxide was used to calculate the effective calcium oxide in lime. Through calculation, the calculation coefficient of lime effective calcium oxide is adjusted to 4.524, making the analysis data closer to the true value. On June 18, in order to do a good job in saving energy and reducing consumption in this unit step by step, the amount of NaF used for solid phase analysis was changed from 1.0 to 2.0 grams. After repeated tests, it was finally determined to be between 1.0 and 1.5 grams, and it was effectively implemented.

3. Have strong organizational and coordination capabilities.

The company’s laboratory work is responsible for serving and guiding production. How to perform functions and safeguard the overall interests of the company is a question of management methods for laboratory work, and it is also a difficulty in communication and coordination. In order to do a good job, I first follow the principle of working according to the rules and correcting any mistakes. I use integrity to deal with conflicts at work, as well as problems and accidents discovered, insist on fairness and impartiality, and establish a new image of laboratory work. Secondly, attention should be paid to strengthening coordination and considering the overall situation, not only using rules and regulations to correct unreasonable behaviors and improve service quality. We also need to adopt a flexible approach to avoid resistance, so that our laboratory work can be carried out in an orderly manner with their support and cooperation. With the care and support of the company's leaders, as well as the assistance and cooperation of various departments, and the active efforts of all staff, gratifying changes have taken place in the service quality.

4. Cooperate with the unit to carry out daily management of the laboratory.

Since I took up the position of deputy director of the laboratory, I have cooperated well with the department heads in the daily management of the laboratory, creating a new situation of unity, positivity and continuous innovation within the laboratory. To be a good deputy, I insist on grasping the word "degree" in my daily work, emphasizing the word "harmony", and achieving the word "complement".

1. Grasp the word "degree" and be "in place and not offside".

The first thing is to establish a sense of taking the overall situation into consideration and be "in place". The first is to carry out the work in charge of oneself and put an end to the phenomenon of buck-passing. The second is that the assistance work is in place, and there is no "kicking the ball" phenomenon, which delays the best opportunity to do things. The third is to handle some emergencies properly.

Have the courage to stand up in daily work, share worries and solve problems for official duties, actively and properly solve these "urgent" and "difficult" problems, and nip problems in the bud.

Secondly, establish a sense of consciously safeguarding official authority and prevent "offside". As a deputy, you must closely focus on the "center" of the principal, consciously obey the leadership of the principal, deeply understand the intentions and requirements of the principal, give full play to your subjective initiative, and actively and creatively carry out work. In my daily work, I often remind myself to obey leaders without force or emotion, in order to improve my awareness of conscious obedience.

2. Emphasize the word "harmony" and make a difference in "obeying but not blindly following".

"Subordinates obey superiors, individuals obey the organization, and the minority obeys the majority." This is our organizational principle. The ancients said: "A gentleman is harmonious but different." "Harmony" means adhering to unity based on truth and adhering to principled obedience. "Different" means that the views are not the same. The deputy should not only be a good friend of the principal, but also a critical friend of the principal. I insist on doing a good job: I am a supporting role in leadership positions, but I am the protagonist in the work in charge; I am a supporting role in macro decision-making, but I am the protagonist in making suggestions; I am a supporting role in overall work, but I am the protagonist in individual tasks. Therefore, the obedience of a deputy is by no means a blind obedience, but a creative obedience. It is precisely by adhering to the above principles that I can better play my role of "assistant, staff and sole responsibility" as a deputy.

3. Achieve the word "make up", "make up for the situation without tearing it down".

I regard "picking up missing pieces and filling in gaps" as one of my responsibilities at work. No one is a saint, and no one can make mistakes. If you encounter mistakes or difficulties in your main job, as a deputy, you should adopt a positive attitude and sincerely make up for the mistake.

To be a deputy in a good position, the general principle is that you should seek your own affairs in your position. You must have a broad mind that is kind to others and treat others with kindness; you must have a peaceful mind that puts your career first and is indifferent to fame and fortune; you must have a healthy mentality that can learn from each other's strengths and be willing to serve as a ladder for others. In terms of moral character, we must cultivate every day, and in terms of ability, we must accumulate every day. Be of one mind and heart with the official position, work with colleagues to assist, and go all out with subordinates to make progress hand in hand. I firmly believe that only in this way can the overall function of the team be fully exerted, greater achievements can be achieved in the work, and the value of the deputy position can be greater reflected.

"The edge of a sword comes from sharpening, and the fragrance of plum blossoms comes from the bitter cold." Opportunities always belong to those who are prepared. It is precisely because of these xx years of hard work that I have learned professional skills, accumulated management experience, and achieved some results. However, the achievement of these achievements is inseparable from the training, support and encouragement of the leaders and comrades of the company and laboratory. I would like to express my heartfelt thanks to you again!

If I can gain the trust and recognition of the organization this time and compete for the position of deputy director of the laboratory center, I will fulfill my duties and creatively carry out various tasks to make new breakthroughs in laboratory work.

1. Under the leadership of the laboratory supervisor, manage the team well and integrate the two laboratories.

After the merger of the two laboratories, in view of the actual situation of "one laboratory and two places" being far apart, it is necessary to make overall plans and achieve "two unifications and three benefits". "Two unifications":

(1) Unification of systems. Organize all rules and regulations, adopt a set of practical standards, and use them uniformly.

(2) Unified deployment of personnel. According to the actual work, the staff of the two departments will be reasonably allocated. "Three sharings": Using Lushan Laboratory as a platform, we can achieve the ultimate sharing of technology, analytical information, and laboratory analysis data between the two places. Ensure unified management and smooth communication.

2. Strengthen learning and exchanges between the two laboratories, learn from each other's strengths, and seek development.

Under the leadership of the laboratory supervisor, we will create a good working and learning environment where everyone wants to do something, everyone can do something, and everyone can do something successfully. Due to the different production processes of the two alumina plants, the analysis project indicators are also different. In view of this, it is necessary to hold regular academic exchanges and on-the-job training activities to learn from each other's strengths, exchange knowledge, and continuously improve the skill level of the overall staff.

3. Assist supervisors and leaders to establish a safety responsibility system with "hierarchical management, consistent responsibilities and powers, and everyone taking their own responsibilities."

Safety is higher than life, and responsibility is heavier than Mount Tai. In view of the actual situation of "one room, two places", we first formulate overall safety goals and implement a safety responsibility system of "hierarchical management, consistent responsibilities and powers, and everyone taking their own responsibilities". Safety responsibilities are refined and decomposed to every level, every link, and every position. They are checked at every level and linked up and down. Safety production is closely integrated with the vital interests of employees. Regular assessments are conducted to ensure that the responsibility for safety production management is fulfilled. Everyone. Form a good situation in which safety and production are jointly managed, and promote the sustainable and healthy development of safety work.

4. Set your position, be a good supporting role, and be a good consultant

First of all, you must do your duty and responsibility for the work in your office, provide reasonable suggestions and ideas to the director, and help the director correctly Make decisions. Secondly, we must have the awareness of overall planning and be a good consultant and assistant so that the decisions made are in line with the wishes of the majority of people. He is more able to stand alone and solve various problems smoothly. All in all, we must fulfill our duties without overstepping our authority, help without causing trouble, and make up for the situation without tearing it apart.

5. Unite comrades, learn with humility, and develop collaboratively

The weather is not as good as the right place, and the right place is not as good as the people. Unity is strength. Only through unity can we work together to form a synergy. Assist the director in daily management work, discuss with everyone when encountering problems, listen to comrades' opinions humbly and sincerely, be strict with yourself, treat others sincerely, care about employees, put yourself in the shoes of employees, and strive to create a relaxed, harmonious and pleasant working environment. If you listen to both, you will be enlightened, if you believe only, you will be concealed. Do a good job in coordination between leaders and employees, and between employees and employees. Exchange ideas and feelings with everyone more, be close friends of employees, and strive to create a work environment of mutual trust, mutual help, and a happy mood. Atmosphere.

If I can run for this position, I will cherish this opportunity and do my job well with my down-to-earth work style, truth-seeking work attitude, enterprising work spirit, heart, emotion and wisdom. Laboratory Technician Competition Speech 2

Dear judges and colleagues:

Hello everyone!

I am from the Quality and Technology Department. I am an ordinary laboratory technician. The title of my speech is - Ordinary Position, Sacred Responsibility.

A bright world, a tragedy in the world.

Where is the integrity! Where is the quality!

As an ordinary laboratory technician, dealing with glass bottles, scales, and medicines all day long seems very simple, relaxed, and even boring, but this is what a laboratory laboratory technician does day after day. Work over and over again. Take this time, for example, when the fatty acid workshop just opened. The crystal clear soap particles produced were very beautiful in appearance, but the dry sodium soap content was detected to be low. This has never happened before. I tested it repeatedly and even suspected where I had a problem. I verified and calculated again and again. When I was sure that I had no loopholes, I breathed a sigh of relief. Finally, we learned that the ice machine in the workshop equipment was malfunctioning, causing the temperature to be high and the moisture to be excessive, resulting in a low content of dry sodium soap. Laboratory testing is the eye of production, and timely and accurate laboratory data can ensure smooth and stable production. Mr. Qin often tells us that every time a laboratory technician makes a sample, he must be responsible for the data produced and the result of the judgment. It seems to be a very ordinary and ordinary data, but the meaning it contains is too heavy and too sacred! Isn't it? Whether it is qualified or not, whether it is reworked or released is all determined and controlled by the laboratory data. That is to say, we master and control the fate of our products!

As a laboratory technician, we cannot tolerate any mistakes in the inspection. Otherwise, substandard products may slip away quietly under your nose; otherwise, a piece of soap or a bottle of dishwashing liquid may flow into the market due to your mistakes; otherwise, the uncrowned honor of China's famous brands and China's well-known trademarks may be due to your mistakes. And shame!

As a laboratory technician, I have to use weights on the scale to weigh the value of my life!

As a laboratory technician, we must use a burette to sublimate ourselves in titration!

As a laboratory technician, you must be a messenger with golden eyes and fiery eyes, identify the truth, goodness and beauty, and protect the products!

The glaciers flow across, and the rocks slide down with majestic scratches.

The volcano erupted, leaving magnificent gifts in the world.

We have dedicated ourselves and left our shining footprints in the development of China.

Comrades and co-workers: love and care! Use our enthusiasm, our wisdom, and our quality to create greater glory! Laboratory Technician Competition Speech 3

Dear leaders and judges:

Hello everyone!

I am xxx, and the position I am competing for is a laboratory technician at the Coal Inspection Center. First of all, please allow me to express my sincere gratitude for your hard work on this recruitment! At the same time, I would like to thank you for giving me a platform to display my talents. I will cherish this rare opportunity, bravely face challenges, and accept everyone's judgment.

Since I started working, I have worked successively in the ____ position in the Power Generation Department and the position of laboratory technician in the Fuel Department. In the past ten years of work practice, I have broadened my horizons through self-pressure, serious study, and humbly asking for advice. Fully mastered the business knowledge and operational skills of all-round duty officer of 350MW unit and incoming coal testing. While consciously integrating into and actively accepting the enterprise's situation education, he also deeply realized the necessity of enterprise transformation and ensuring safe production and building profitability. foundation and the importance of ensuring corporate efficiency. Therefore, in different positions, I have always regarded strictly fulfilling job responsibilities, strengthening business skills learning, actively participating in team management, and sincerely helping colleagues and friends as my daily work principles. I have gained the trust and trust of leaders and colleagues at all levels. Good reviews.

I personally believe that the position of laboratory technician in the Coal Inspection Center bears the great responsibility of inspecting the coal entering the factory. In order to avoid the loss of corporate benefits and the emergence of safety hazards caused by unstable combustion of boilers, laboratory testing must be highly valued and taken seriously. Therefore, laboratory technicians must first have a high sense of work responsibility and a strong sense of mission, take ensuring corporate efficiency as their highest responsibility, seek truth from facts, strictly demand, and effectively perform laboratory work responsibilities. Secondly, we must strictly abide by industry standards and operating procedures to ensure that the inspection methods are correct and the process control is reasonable, so as to ensure the accuracy and representativeness of the inspection results.

The third is to do a good job in the maintenance and upkeep of inspection equipment, ensure the normal backup of laboratory equipment, and prevent equipment failures and errors from causing loss of corporate benefits. Fourth, we must obey the work arrangements, do not shirk or shrink back, and do our best to complete the tasks assigned by leaders and teams at all levels.

At present, enterprises have a very arduous task of reducing and turning around losses, and coal entering the factory, which accounts for nearly 80% of the company's costs, has pushed laboratory technicians to the first level of maintaining corporate efficiency. Only higher standards and requirements More strict. Therefore, competing for this position seems to be a brand new challenge, but I believe that with the knowledge learned, accumulated experience, improved abilities and own qualities in the positions of all-round attendant and laboratory technician, especially for good job The understanding of the importance of corporate profitability, as well as the sense of responsibility and down-to-earth work style cultivated by working in the production system, have laid a solid foundation and created favorable conditions for being competent at work and fulfilling job responsibilities. In addition, I have received systematic education in thermal engineering, computer information management and application, and power system automation. On the premise of having strong professional knowledge, I also have strong office automation software application capabilities. In addition, I also have a strong sense of responsibility for my work. I can analyze problems carefully when encountering them and accept new ideas and new things quickly. This is also my advantage in being qualified for the new position.

Dear leaders and judges, I am very aware of the major responsibilities of laboratory technicians, and I have sufficient confidence to perform the responsibilities of my new position well. If you trust me and support me, I will fulfill my promise with practical actions and reward your choice with new performance.

Thank you everyone! Laboratory Technician Competition Speech 4

Dear leaders and colleagues:

Hello everyone!

First of all, I would like to thank my leaders and colleagues for their trust and support and giving me this opportunity to participate in the competition speech. Although I am self-recommended today, I am not selling myself out and boasting. I just want to show the real me to the leaders and colleagues.

I have some understanding of xx before, and I feel very proud to be standing here today, because I have also become a xx person!

Although I have only been in the company for one month, after a month of training and study, I have a deep understanding of the spirit of xx, which is "realistic, innovative, united and efficient". It is under the inspiration of this spirit , let me find the goal of struggle again. It’s the same in any company. The company can only provide you with the necessary conditions. You still need to work hard to get the box office you want! Because I always believe: Only hard work can yield a harvest!

Franklin has a famous saying: "Promote your career, don't let your career push you." Today, with the purpose of participating, exercising, improving and promoting career development, I am standing here to participate in the competition test member. Although I have not been in the company for a long time, during this period, I was fortunate to receive care and help from my leaders and colleagues. I would like to take this opportunity to express my heartfelt thanks to all the leaders and colleagues who have always cared, supported and helped me. , thank you all for your trust and support!

If I participated in the competition because I was full of youth and active participation spirit before, then I think this competition has more mature thinking. I am relying on three red hearts in this competition, that is: enthusiasm, sense of responsibility and enterprising spirit. Specifically: high work enthusiasm, high sense of responsibility and the spirit of continuous improvement.

Regarding laboratory work, I personally think that we should pay attention to the following points:

First, we must strengthen our professional knowledge and continue to learn from laboratory technicians. My previous job was not in laboratory testing, so I lacked knowledge and experience in this area, but I believe that as long as you study hard, ask for advice humbly, and take it seriously, these are not difficulties. Because I am afraid of being serious in everything!

Second, always maintain the "three hearts", that is, confidence, care, and attentiveness. Laboratory testing is a delicate job, so you must always stay calm in every detail of the work, and always remind yourself of the importance of your work!

Dear leaders and colleagues, participating in the competition is about the process, not the results. Participating in competition itself is a process of self-exercise, self-improvement and self-expression. As the ancients said, "You can't be proud of your abilities for a moment; you can't be frustrated for a moment and fall into trouble." No matter what the result is, I will use this sentence to encourage myself, and I will continue to be down-to-earth and work diligently. Laboratory Technician Competition Speech 5

Dear leaders:

Hello everyone!

I am Song Huatao from the testing center. Today I am competing for the position of physical inspector. After graduating in 1999, I applied to work at Tianrun Crankshaft Co., Ltd. In 2002, I passed a competition and worked in the measurement room of the testing center until now. During this period, I was mainly responsible for the warehousing, distribution, cycle, zero repair, and scrapping of special measuring tools. In the past few years of working in the measurement room, I have not only experienced a lot of pressure, but also have endless motivation. When I first arrived in the metrology room, I was a "layman" in metrology. Later, through my unremitting efforts, I finally became an "expert" in metrology.

In the past few years of working in the testing center, I have deeply felt the importance of knowledge and skills, although I have now become an "expert" in metrology.

However, I have never had the opportunity to get in touch with or have an in-depth understanding of physical testing. I want to use this competitive opportunity to get more opportunities to learn and exercise.

Don’t underestimate me, don’t say that I’m a “mantis trying to get a car, but I don’t know what I can do.” How dare a person who knows nothing about physical testing dare to apply for a job? Everyone knows that the company will not For freeloaders. I am young, motivated, and capable. If the company can give me this opportunity, I will definitely learn from the seniors with an open mind. Every position has its own characteristics, and every job has its own rules, but as long as you want to learn , as long as I study hard, learn according to local conditions, study with a purpose, and combine practice with practice on the job, I believe that I will be able to master the theoretical knowledge and practical skills of the job in a short time, and better serve the company. I have always believed that "many things are not about not being able to do them, but about not doing them. If you think about it carefully, say it, and do it, you will definitely be able to do your job well and produce results. You are just afraid of not doing it." This is what I think, too. Do this. Please give me this opportunity to learn. Laboratory Technician Competition Speech 6

Dear leaders and colleagues:

Hello everyone, my name is XX. Is a glorious member of the Communist Party of China. Studied at XX University. While in school, he served as the head of the department's learning department and monitor. Graduated as an outstanding graduate in June 20xx. Since graduation, he has been working in the pharmaceutical industry.

From July 9, 20xx to December 21, 20xx, he took office in the central control group of JP Pharmaceuticals.

Working in HM Quality Department from December 27, 20xx to present. Among them, he worked in the instrument group from December 20xx to May 20xx. Most of the rest of the time, he rotated in the central control team of workshops 103, 104, and 105 and served as the squad leader.

After 5 years of study and work experience accumulation, I have become more mature and stable. And gradually improve myself and strive to become an excellent quality inspector.

Today I am competing for the position of central control technician, mainly because I have the following advantages and abilities:

1. Have certain theoretical knowledge and practical experience.

2. Have strong coordination and communication skills.

3. Have a strong sense of responsibility and execution ability.

If I can be elected, I will implement the following work ideas:

1. Clarify job responsibilities and complete quality inspection work with quality, quantity and safety. As a technician, I am first of all a laboratory technician. I will work hard to communicate with the workshop and arrange daily and temporary testing items. Report test data to the workshop and relevant leaders in a timely and accurate manner, and do a good job of statistical summary.

2. Strengthen team building. I will fulfill my duties and manage boldly. It is necessary to adhere to principles and communicate flexibly. Understand the ideological trends of each employee, apply according to their talents, make the best use of the situation, and mobilize the enthusiasm and enthusiasm of each employee for work. Enhance team cohesion and improve work efficiency.

3. Quality management and safety. On the one hand, in accordance with the requirements of the quality department management and production positions, combined with its own advantages, it increases technical guidance to employees in the position to ensure that fast and effective data is provided to the production workshop; while ensuring the normal progress of various inspections, it also ensures safe production Zero accidents. On the other hand, I will grasp my position and assist leaders in completing the following tasks: verification of instruments, equipment and methods, drafting of relevant quality standards and SOPs, document management and related training at all levels, standardized management of relevant records and reports, and equipment maintenance Maintenance, handling and repair of equipment abnormal conditions, analysis and data summary of abnormal detection results, safety training and cleaning of the working environment, etc.

If this election is successful, I will base myself on my duties, be down-to-earth, fully perform the duties of a technician in the quality department, and strengthen management. I will prove myself through practical actions. I hope that the leader will give me this opportunity so that I can have such a platform to display my talents and contribute to my department and our company. Laboratory Technician Competition Speech 7

Dear Leader:

Hello!

Thank you for giving me this opportunity to participate in this open and fair competition. I am a hard-working person, and because I was deeply moved by the company's culture, I came to compete for the position of laboratory technician. The following is my competition speech, the third part.

1. Personal resume

My name is xx, born in 20xx, graduated from the Bioengineering Department of xx Vocational and Technical College in 20xx, and entered xx in October 20xx. So far, I have been working in this process with a serious attitude and positive attitude. I actively help each other in the team and work seriously and responsibly. While in school, students will be proficient in the theoretical principles of biochemistry, microbiology, cell biology, enzyme engineering and fermentation technology, food testing and other important professional courses, understand their basic experimental hands-on operations and application capabilities, and obtain the corresponding certificates for senior food inspectors.

2. Advantages of competition

I have a sense of responsibility that dares to do something, a hard-working work spirit, and I can handle problems with a calm mind and judge right from wrong. , keep a clear distinction between public and private affairs, and never pretend to be public or private.

At the same time, I have certain management experience. As a company laboratory technician, I must strictly control product quality, because as long as the quality of a good product passes, consumers will trust and rely on it. It must be accomplished with the joint efforts of each of our employees. It is even more necessary for laboratory technicians to strictly control the situation.

3. Work Ideas

If I apply for a job as a quality controller, I will first strictly control the quality of the product starting from pickling. Pickling is the life of the product. Process execution is the lifeblood of the product. Pay close attention to process execution, ensure complete process execution, and ensure the control of internal impurities in the product. Secondly, focus on product measurement and hair impurity control in the enema process. The product measurement should be checked from time to time every day to see if it complies with the process requirements. The hair should be carefully checked, whether the impurities are controlled in place, the principle of first in, first out, and whether the stamping is clear and clear. Time chain of sterilization process, smoke color. Check from time to time every day whether the cooking, smoking, and drying times of the sterilization process are strictly implemented according to the process. In particular, incomplete drying will cause water to appear on the product.

Sterile packaging quality and first-in-first-out splicing. Aseptic products must be wrapped in ice before each shift and tested to see if there is air leakage or water intrusion. There are more than 70 people working in the sterile process, so hair control will be more difficult, but I will strictly check whether each employee has hair loss to see if the control is thorough. Whether the splicing quality of the splicing process, meat leakage, casings/strings are in place and controlled properly. We will track and implement the control of microorganisms from the disinfection of personnel, and the concept of mutual hair inspection is the disinfection of personnel. Every employee must implement it seriously and actively. The stretch film operator must quantitatively control the temperature of the machine to reduce the rate of film running or defective products.

The labeling process is the last process and the last door to the market. In the labeling process, attention should be paid to the quality of product packaging and the phenomenon of too many and too few pieces, so as to minimize market feedback and be familiar with the operation dynamics. Operational performance. Packaging quality must be strictly checked on duty. A dedicated person must be responsible for dynamic weighing. Products must be inspected. Products on the assembly line must be promptly disinfected after landing. The responsibility of employees in the labeling process must be strengthened to reduce quality problems.

The above is my competition speech. I hope that the leader can give me the opportunity to use myself this time. If I can be a quality controller, I will be loyal to xx, love xx, and focus on xx to fight and innovate. Come to strictly demand yourself, do your job well, and ensure product quality. Laboratory Technician Competition Speech 8

Dear leaders, judges, and colleagues:

Hello everyone!

First of all, I would like to thank the company for giving me such an opportunity to compete for the position of laboratory technician in our company. First of all, I would like to briefly introduce myself. My name is xx, I was born in 20xx. I have been working in the company since June 20xx. I have been working for more than half a year. From a person who had no outbound call experience to a person who can communicate with marketing representatives, my experience has increased a lot, and I have also gained a lot of experience. I have gained a lot. The reason why I participated in this competition is that I love the job of customer service and hope to accumulate more related experience.

First of all, let me talk about my understanding of testing. The laboratory test is to extract the recordings of the outbound call operators, conduct listening and inspection of the recordings of the outbound agents according to the laboratory requirements, analyze and comment on the problems caused by the listening, and generate reports to provide a basis for the evaluation of agent performance appraisals and assist the team leader. Complete project requirements to meet mobile customer requirements.

So, if I could become a laboratory technician, I would:

1. Develop a clear goal plan, monitor the attendant’s recordings according to laboratory requirements, spot-check problem recordings, and summarize reports ;

2. Good service awareness, fair and rigorous handling, analysis and resolution of problems, comments and corrections, to reduce recurrence;

3. Familiar with mobile projects, internal Project FAQ, formulate training suggestions, provide business processing and service quality, and improve customer satisfaction;

4. Work closely with the project team, lead the team to complete work goals, and improve service levels.

Therefore, I believe that with half a year of telephone service experience, I am qualified for this job. I love my work and do a good job in laboratory inspection, comply with customer requirements, and reduce complaints.

Regardless of whether I succeed in this competition, I will treat my work with full enthusiasm, accumulate more, and wait for the next opportunity to give a speech for the laboratory technician competition. I hope that my above statement will satisfy the leader and be willing to give me this opportunity to take up this position.

Thank you everyone! Laboratory Technician Competition Speech 9

Dear leaders, judges, and colleagues:

Hello everyone!

First of all, I would like to thank the company for giving me such an opportunity to compete for the position of laboratory technician in our company. First of all, I would like to briefly introduce myself.

My name is xx, I was born in 20xx. I have been working in the company since June 20xx. I have been working for more than half a year. From a person who had no outbound call experience to a person who can communicate with marketing representatives, my experience has increased a lot, and I have also gained a lot of experience. I have gained a lot. The reason why I participated in this competition is because I love the job of customer service and hope to accumulate more