Just kidding, ice sculpture can be an art!
Ice sculpture is an art form with ice as the main material. Because of the variability and volatility of materials, ice sculpture presents many difficulties. Carefully choose the ice suitable for ice sculpture. The ideal ice should be pure water, which has high transparency and as few bubbles as possible. Ice sculpture also needs to consider temperature and speed to avoid ice melting. If you don't make ice sculptures in cold areas, you usually need to carve them in a large freezer. Therefore, in tropical areas, ice sculptures are not common.
Where did the ice from the Ice Lantern Ice Sculpture Exhibition come from? Why can hot lamps and cold ice live in peace? What's the difference between Bai Bing, transparent ice and colored ice?
There are three kinds of ice in the freezer, white, transparent and colored. Bai Bing is like the popsicle people usually eat-"Shuang". Transparent ice is pure and transparent without any impurities, while colored ice has many colors such as yellow, red and purple.
Ice making is very particular. It is understood that the easiest ice to make is Bai Bing, which can be frozen with ordinary water. White ice bricks generally constitute the basic part of ice sculpture, with the largest amount.
The most troublesome thing to do is transparent ice, which is made of pure water. The production process takes 48 hours. In the first 24 hours of production, workers must stay awake and constantly remove impurities produced during ice making. After installing the lamp, the transparent ice body emits seven colors of light, which is very dreamy.
The ice with the highest technical content is colored ice. Before making ice, special chemical pigments need to be added to water and then frozen at low temperature. How to make the color uniform and the pigment does not change color at low temperature needs special attention.
Ice brick wall water as adhesive
Without cement and steel bars, tall buildings and city walls can only be built by water and ice. Magical buildings can be seen everywhere in the freezer.
Ice sculptors and workers piled up blocks of ice. A piece of ice is about 1 m long, 20 cm wide and 10 cm thick. The ice sculptor grinds and chisels the ice brick as needed. Finally, put some ice cubes together.
How do slippery ice bricks stick together? The ice sculptor had an idea. They watered the cracks in the ice. Because the temperature in the freezer is very low, the ice bricks naturally stick together.
There is a knack for getting along with cold and hot.
There are gaps between the ice cubes in the ice sculpture, and the light source is placed between the gaps, mainly in green and red.
The ice is cold and the lamp is hot. How to get along with one cold and one hot? According to the staff, the ice lamp chooses a cold light source, which emits much less heat than ordinary fluorescent lamps and light bulbs. In the process of carving, the temperature in the freezer is about MINUS 6 or 7 degrees Celsius, and it reaches MINUS 10 degrees Celsius at the coldest time, which is enough to offset the heat emitted by the lights.
You can also have a look here and introduce the tool: /txdestination/msfq.php? city id = 14 & amp； id= 12300