what should I do if there are blisters on the floor? I have a slow walk in my left hand and a slow walk in my right hand. Dealing with problems according to procedures can get twice the result with half the effort.

Original author: Chen Haoning

No matter what the reason is, even if the heating leaks, the pipe fittings break and the fish tank breaks, it is possible. Besides dealing with these thorny problems, there are blisters on the floor of the house, which is a thorny problem. What should I do?

I'll give you a way to deal with the loss caused by boiling water on the floor at home.

In our daily life, the heating facilities are leaking, the water pipes are not turned off, and we forget to leak water from the windows or windows in rainy days, which may cause bubbles on the wooden floor. After the floor bubbles, once it is found, cut off the water source first, and then drain it, so that the water on the surface of the wood floor can be drained first. The water in the cracks in the wood floor can be sucked clean by materials with strong hygroscopicity or high-power vacuum cleaners with absorption function.

First aid for soaking water in the wood floor 1

In the case of solid wood composite floor, laminate floor and cork composite floor, if there are bubbles, you can directly tear the area with bubbles to avoid getting wet. The removed wooden floor is basically worthless.

Then, after the moisture content of the grass-roots floor meets the requirements of wooden floor packaging, the new wooden floor will be packaged, but the following problems may occur:

1) The original wooden floor manufacturer may not be found.

2) The original wood flooring manufacturer may no longer produce this type of wood flooring.

3) The colors of the existing wooden floors of the existing wooden floor manufacturers are inconsistent, and there is chromatic aberration. This is normal. Solid wood composite floors are usually dyed, and wood floors produced by different kinds usually have chromatic aberration. (William Shakespeare, Hamlet, famous sayings of trees) It is also the case that the patterns and colors on the surface of the reinforced floor are printed matter.

4) Log flooring manufacturers have the same layout of wood flooring, but the new wood flooring and log flooring are different in luster after packaging.

in the first three cases mentioned above, only the wooden floor can be replaced in the whole room. In the fourth case, depending on the coating surface, different solutions can be adopted.

First aid for soaking water on the wooden floor. 2

What should be done after repackaging the wooden floor with different decorative structures?

1) Paint polishing: If there are scratches on the original wooden floor surface in the room, but there are daily wear or paint scratches on the paint film on the wooden floor surface, dust removal treatment should be carried out first after packaging is completed, then the wooden floor surface of the whole room should be cleaned with a floor cleaner, and then the paint film on the wooden floor surface should be polished flexibly with a grinder, a dust regulator and more than 3 sand pads. The principle of this engineering treatment is the same as that when the bicycle tube leaks to supplement the inner tire, the area where the inner tube needs to be repaired is first made into files several times, and the rubber skin surface files to be repaired are prepared, and then the adhesive is pasted together.