1. Open the menu → Tools → Settings → Connection Settings → Access Point. At this point, you have created an access point named China Mobile MMS. After opening, you can see the connection name-China Mobile-MMS data-bearer mode-GPRS, access point name: cmwap；; User name: none; Prompt for password: No; Password: No modification is required; Identification: safety; Home page:)
Send information: Send immediately (reference value)
Send yourself a copy: no (reference value)
Include signature: No (reference value)
User name: the user name of my email address.
Password: email password
Mail receiving server:
Provided by email website (take Sina as an example here: pop3.xxxx.com.cn).
Mailbox type: POP3
Security protection: off
APOP secure login: off
2. Active mailbox: Information-Options-Settings-E-mail-Active mailbox-Select the email address. When there are multiple mailboxes, there are multiple options.
3. After setting up the email, open the menu-Info-The email name you set will appear under the menu.
Third, send and receive emails.
1, receiving mail.
Menu-Info-Find the email you set-Enter, and the system will prompt whether to connect the email. After selecting "Yes", it will connect to your mailbox through the set access point. Press "Options" after entering the mailbox-extract mail, and you can choose to extract new information or all information. When selecting a connected mailbox, unread or all messages in the mailbox will be collected, and the messages to be extracted need to be selected for extraction. For the selected message, the icon in front will turn gray and the arrow will turn inward. If it has not been selected, the icon in front will be colored and the arrow will face outwards. I don't know why, the content in the theme is often garbled, but after extraction and opening, the text content is normal.
Step 2 send an email
Menu-Info-Find the email you set-Enter, open the option-Write Info-Email, and the interface shown in the figure below will appear.
After writing the recipient, cc and subject, you can write the following text, and you can choose to insert the attachment (method: press Options-Insert-Select the attachment to be inserted in the email writing interface, including pictures, audio clips, video clips, notes and common phrases). After inserting the attachment, there will be an icon of the attachment in the status bar above, or you can click Options-Attachments in the email composition interface to view the attachment. When the text and attachments are written, you can press the option-send, and the system will automatically connect to GPRS according to the access point you choose to send. If the sending conditions are not met, for example, the GPRS connection is unsuccessful, the mail will be saved in the outbox and wait for the opportunity. Press the middle button of the navigation key, and you will have the options of delaying sending, deleting, sending and moving to the draft. You can choose according to your own needs.
Monternet Internet settings are as follows:
1, menu-Settings-Connection Settings-Access Point, and press Options-Add Access Point-Use default settings.
2. Connection name (customizable)-Data bearer mode (GPRS)- Access point name (CMWAP)- User name (None)-Prompt for password (No)-Authentication (Normal)-Home page ()
3. Options-Advanced Settings-Mobile IP (Automatic)-Primary Domain Name Server (Unchecked)-Secondary Domain Name Server (Unchecked)-Proxy Server Address (10. 0. 172)- Proxy Port (80)
4. Return to the connection settings-GPRS-GPRS access (if necessary)-access point (CMWAP).
5. Network-Options-Settings-Default Access Point (set to the connection name mentioned in step 2) is determined.
15. If you can't send MMS, please make the following settings:
1, menu-Settings-Connection Settings-Access Point, and press Options-Add Access Point-Use default settings.
2. Connection name (customizable)-Data bearer mode (GPRS)- Access point name (CMWAP)- User name (None)-Prompt for password (No)-Authentication (Normal)-Home page ()
3. Options-Advanced Settings-Mobile IP (Automatic)-Primary Domain Name Server (Unchecked)-Secondary Domain Name Server (Unchecked)-Proxy Server Address (10. 0. 172)- Proxy Port (80)
4. Enter Information-Options-Settings-MMS-Access point used (set as the connection name mentioned in step 2)-OK.
16, Nokia mobile phone production date inspection method
Nokia Nokia
*#0000# Display:
VXX。 XX is the software version.
Day-month -YY is the production date (day-month-year).
NXX-X is the phone model: for example, 33 10 is NHM-5.
17, the solution to the crash
1, download the content of authorized MMC card in Chinese mainland. There seems to be something wrong with the one in Hong Kong. I wonder how others use it.
2. Remove the SIM card of the mobile phone and use it to restore the factory settings: *#7370# lattice machine, initial password 12345.
3. When the card is inserted into the mobile phone, several softwares will be automatically installed, including the very easy-to-use "business card identification" and "mobile QQ";
This should be good. Some commonly used software is installed in the mobile phone, which will run faster and save electricity. It is not advisable to install too much software in the mobile phone. Mobile phone memory should not be less than 20M, so as to develop good habits. Use TaskMan V 1.00 to close the unused process after use! If you have any questions, please post and communicate.
In addition, it is easy to crash when taking pictures. In this case, you only need to close the browsing photos after taking photos.
Detailed settings of GPRS for Nokia 5700. Incoming connection settings for users who cannot access the Internet or send MMS:
First, log on to the Nokia website to customize the settings.
N73 Click below to enter: Nokia N73 mobile phone configuration.
For other Nokia phones, please choose from here: Other Nokia phones are customized as standard configuration.
Fill in your mobile phone number and security measures (verification code), click the custom setting data, and a short message will be sent to your mobile phone, free of charge.
After your mobile phone receives the SMS, open the SMS sent by Nokia, press "Options" and then "Save", and it will be set automatically.
Please note:
These settings will be sent to your mobile phone in the form of SMS. This process may take several minutes. Please be patient.
Please remember the PIN code returned by the system after downloading. You will need this PIN code when saving the settings.
This download service is a free service provided by a third party; This service requires the browser to allow pop-up windows.
Please make sure that you have opened MMS, WAP/GPRS, Internet and email services at the mobile operator.
Generally, mobile phones are set up like this, but when you can't access the Internet, you can't fill in the home page of WAP Internet settings yourself. You can surf the internet by filling in the homepage manually. I don't know why I can't set this automatically.
Second, the manual setting:
1, monternet GPRS (for WAP)
Connection name: Monternet GPRS (fill in the name casually, as long as you recognize it)
Data bearing mode: packet data
Access point name: cmwap
User name: None
Prompt for password: No.
Password: None
Identification: Normal
Home page:
Call up advanced settings in the options.
Network type: IPv4
Mobile IP address: automatic
DNS address: automatic
Address of proxy server: 0 10.000.000. 172.
Agent port number: 80
2. China Mobile MMS
Connection name: China Mobile MMS (fill in the name casually, as long as you recognize it).
Data bearing mode: packet data
Access point name: cmwap
User name: None
Prompt for password: No.
Password: None
Identification: Normal
Home page:
Call up advanced settings in the options.
Network type: IPv4
Mobile IP address: automatic
DNS address: automatic
Address of proxy server: 0 10.000.000. 172.
Agent port number: 80
3. Network Internet
Connection name: WEB Internet
Data bearing mode: packet data
Access point name: cmnet
User name: None
Prompt for password: No.
Password: None
Identification: Normal
Home page:
Call up advanced settings in the options.
Network type: IPv4
Mobile IP address: automatic
DNS address: automatic
Proxy server address: None
Proxy Port Number: None
Note: 1, "none" means none;
2. You can fill in the "connection name" at will, as long as you know what it is for;
3, it is best not to use cmnet to surf the Internet unless you have money or a monthly subscription, because the usage fee is too expensive.
MMS settings:
MMS Settings: Info-> Options-> Settings-> MMS
Access point: China Mobile MMS (you just filled it in, you know).
Others don't need to be changed, so you can send and receive normally when you quit.
Mail settings:
1. Select: Info-> Options-> Settings-> Email.
2. select: mailbox-> options-> new mailbox-> start.
3. Select POP3, and then click Next.
4. Enter your email address, such as nokia@ 163.com, and then click Next.
5. Enter the mail receiving server, 163 is: pop. 163.com, and then click Next.
6. Enter the outgoing mail server smtp. 163.com, and then click Next.
7. Use the access point, select WEB Internet (according to your own settings), and then click Next.
8. Email name: fill in casually.
Basically, if you want to send and receive email more easily, set the following settings:
9. Select: Info-> Options-> Settings-> Email-> Email-> Select the email name you just filled in.
10, connection settings-> receive mail, fill in user name and password, security (port): off, port: default, APOP security login: on.
1 1. Return, choose to send an email, and fill in the user name and password.
12, you are done. Now you can send and receive emails conveniently with your mobile phone.
Note: The access point you use must choose WEB Internet (cmnet) to use e-mail, but you can find and install GPRS software to send and receive e-mail, so that you can make full use of monthly GPRS.
About surfing the internet:
Don't surf the Internet directly from the browser icon on the desktop, and don't surf the Internet from the "network" of shortcut keys. Enter from the menu, select "Service" and enter the URL here. I don't know why the desktop and shortcut keys can't get online now.
How to enter Monternet: Press the "0" key to enter Monternet during standby time, and you can check the weather forecast for free.