Abstract: The photo frame is similar to a square, with a hollow inside, and the blank space can be used to place commonly used photos. It is mainly used to position the four sides of the photo and enhance its aesthetics. It is also helpful to protect the quality of photos, such as photo frames with glass, which can prevent photos from discoloration and yellowing. So how to use PS to make various borders? Below I will introduce you to the relevant knowledge of PS photo frame, I hope it can help you. How to make various borders with PS?
1. PS Rotate Border
1. Open the picture, select a rectangular border, and enter Quick Mask;
2. Filter - Pixelate - Lattice (set to about 15);
3. Filter-Brush Stroke-Splash (set to 25, 7);
4. Filter-Distort- Extrude (set to 100%);
5. Filter - Distort - Rotate and Distort (set to 999);
6. Exit Quick Mask - Invert - Clear;
7. Save the picture as a file.
2. PS’s beautiful square effect
1. Open the picture and select a rectangular border;
2. Press Q to enter the quick mask; < /p>
3. Execute Filter - Pixelate - Dotted (select size 25);
4. Execute Filter - Pixelate - Fragment (2 times);
5. Execute Filter - Pixelate - Mosaic (the size is determined according to personal preference);
6. Execute Filter - Sharpen - USM Sharpen (Quantity 40, 1, 0, repeat About 5 times);
7. Press Q to switch to the standard mode and become a selection;
8. Edit - Stroke 1 (width is 1, color is white, outside, Mode is normal, opacity is 100);
9.OK, save the picture as another.
3. Use PS to create a border with a splash and tear-off effect:
1. Open the layer and double-click to unlock it;
2. Select the rectangle tool to draw a Make a rectangular selection smaller than the original image, press Q to enter quick mask;
3. Filter--Brush Stroke--Splash, select: Radius is 5, Smoothness is 3;
4. Press Q to exit the mask, select--invert the selection;
5. Press the Del key to delete, select again--invert the selection, edit--stroke, the color can be customized;< /p>
6. Image--Adjust;
7. File--Save as
4. PS random borders:
1. Open Layer, double-click the layer to unlock;
2. Use the rectangle tool to select a smaller rectangular border with a custom size;
3. Press Q to enter quick mask;
p>
4. Click Filter--Blur--Radial Blur. Note that the number of settings for this picture is 8. You can also customize it and see the effect;
5. Edit-- Reduce the blur and set the opacity to 50%;
6. Filter - Sharpen, note that the number of sharpening times is 4 to 6 times;
7. Press Q again Exit quick mask;
8. Select--Invert selection, use Del to delete;
9. Save.
5. PS lattice border:
1. Open the picture and double-click to unlock;
2. Select a smaller rectangular border and press Q to enter the quick Mask;
3. Filter - Pixelate - Lattice (select 15), then fragment twice;
4. Filter - Brush Stroke - - Splash (select 15, 10);
5. Filter - Brush Stroke - Spray Stroke (select 10, 5, once on the left and right diagonals);
6. Sharpen 3 times;
7. Press Q to exit quick mask, select - Invert, press Del to delete;
8. Stroke (1 time) , the color can be customized;
9. Save.
6. PS special border (also the simplest and most convenient border, simple borders are used more by people)
1. Open the picture and double-click to unlock it.
2. Use the rectangle tool to select a smaller rectangular border with a custom size;
3. Stroke (width 3 or 5px), custom color, and position inside.
4. After completing the third step, reverse the selection - fill color
5. Create a new layer - click the writing tool to sign - merge - complete - save.
7. PS artistic effect border
1. Open the image unlock and select a rectangular border;
2. Press Q to enter the quick mask-filter -Artistic Effect-Watercolor (Settings: 7, 10, 3);
3. Exit Quick Mask;
4. Invert-Del-Stroke (1);< /p>
5. Trim and save.
8. Weaving effect border
1. Open the picture and copy a layer;
2. Select a rectangular border;
3. Press Q to enter quick mask;
4. Filter - Brush Stroke - Shadow Line (setting parameters: 50, 20, 1);
5. Exit Quick mask-inverse selection-create a new layer-fill with your favorite color;
6. Filter-sharpen-sharpen (2 times);
7. Blending options - Stroke (1);
8. Blending Options - Bevel and Emboss - Glossy Contour - Ring Tricycle;
9. Filter - Weave;
10. Save the picture as a file.
9. PS watercolor edge effect
1. Open the picture, double-click to unlock it, and select a smaller rectangular border;
2. Invert the selection and enter quick mask version;
3. Filter-Distort-Ocean Ripple (the value can be customized according to preference);
4. Filter-Pixelize-Fragment (3 times);
p>
5. Filter - Artistic Effect - Watercolor (customized value);
6. Exit quick mask, delete DEL;
7. Transfer to IR, Save the optimized image as a save.
10. PS mosaic border effect
1. Open the picture and double-click to unlock;
2. Use the lasso tool to select the area you want to keep and invert the selection - Delete DEL;
3. Select-Modify-Expand (keep more than 10 pixels);
4. Filter-Mosaic (set 4-8 pixels), fragment once ;
5. Filter - Sharpen (number of times customized);
6. Save the image as a file.
11. PS flower border
1. Open the picture, unlock it, and select the rectangular border;
2. Select - invert the selection;
< p>3. Enter Quick Mask;4. Filter - Pixelate - Color Semi-Wither (select 15);
5. Filter - Pixelate - Fragment - Sharp (3-4 times);
6. Exit quick mask and delete;
7. Image - Trim - Layer Style - Stroke;
8. Save in gif format.
12. PS mosaic frame
1. Open the picture, unlock it, and select a rectangular border;
2. Enter the quick mask;
p>
3. Filter - Sketch - Watercolor Paper (set 30, 80, 60);
4. Filter - Blur - Radial Blur (Zoom 60);
5. Edit - fade radial blur (select 50);
6. Filter - pixelate - mosaic (10);
7. Filter - sharpen (2-4 times);
8. Exit Quick Mask;
9. Select-Inverse-Select-Delete-Layer Style-Stroke;
10. Completed, save the picture
13. PS border gauze fantasy
1. Open the picture and use the lasso tool to outline the desired pattern;
< p>2. Enter Quick Mask;3. Select Filter-Artistic Effect-Shading Effect (10, 30, 150%, 20);
4. Filter - Pixelate - Fragments (1 time);
5. Filter - Pixelate - Sharpen (1 time);
6. Exit Quick Mask;
7. Invert selection-delete;
8.Window-history-clear;
9. Filter-sharpen-sharpen (2 times);
10. Completed, save the image GIF.
14. PS transparent line border
1. Create a new layer and select all;
2. Stroke (setting 3, centered) ;
3. Filter - Pixelate - Fragmentation (4-5 times);
4. Filter - Sharpen (4-5 times);
< p>5. Merge layers;6. Completed, save the image.
The purchase interface screen of Csgo may be that the graphics card driver is too old. It is recommended to update the driver version of the graphics card. Csgo, s