This is not a new game, but a wireless router connected by wireless routing (WDS) and a network cable connected to the Internet through wireless routing. As shown in the figure below.

I. Settings of "Primary Wireless Router"

Generally speaking, it is enough to specify a wireless channel. (Late TP wireless routing seems to be unnecessary to specify. )

Log in to the "Main Wireless Router Management" interface, and set the "SSID Number" and "Channel" in Wireless Settings-Basic Settings, as shown in the following figure:

Second, the setting of "wireless router as wireless network card"

1. Modify the IP address of the LAN port. In the setting of network parameters-LAN port, modify the IP address to be different from the main wireless router (to prevent IP address conflict), such as192.168.1.2, and the router will automatically restart after saving.

2. Enable WDS function.

After restarting, log in to the "main wireless router" with the changed LAN port IP address, and check "Turn on WDS" in Wireless Settings-Basic Settings. Click "Scan" to search for surrounding wireless signals.

Select the SSID number of the "main wireless router" from the scanned signal list, as shown in the figure below, and click "Connect".

3. Set the channel to be the same as the "main wireless router" channel. At the same time, set the encryption information to be the same as the main wireless router, and click "Save". As shown in the figure below,

4. Shut down the DHCP server. In the DHCP server, select Do Not Enable, save and restart the router.

The Wireless Router for Wireless Network Card is already configured. At this time, when the "wireless network card of the wireless router" and the main wireless router have successfully established WDS.

Signature line