You still have to start with the blue screen code to know what is going on.
In the process of using Windows, you often encounter the phenomenon of blue screen. How to solve the computer blue screen? Just prescribe the right medicine. There are many reasons for blue screen. Let you know what a blue screen is with the blue screen code encyclopedia!
The overall situation can be summarized as follows.
1. The screen display system is busy. Please press any key to continue.
(1) Insufficient virtual memory leads to system multitasking error.
(2)CPU overscreen causes operation error.
2. Incompatibility or damage of memory chips will lead to operational errors.
3, caused by unknown programs or virus attacks.
4. The system is bloated.
5. When reading a CD, the CD-ROM drive opens abnormally.
The above are the most common blue screen failures, and there will be other inexplicable problems that lead to the blue screen of the computer. In any case, after encountering such a problem, we should carefully analyze the causes of the problem and then start to solve it.
Blue screen is common when using Windows, and it is laborious and time-consuming to reinstall the system frequently because the source of the error is not clear.
The following collected some Windows blue screen codes for your reference.
0x0000 operation completed.
0x000 1 incorrect function
0x0002 The system cannot find the specified file.
0x0003 The system could not find the specified path.
0x0004 The system cannot open the file.
0x0005 Access denied
0x0006 Invalid code.
0x0007 The memory control module is damaged.
0x0008 There is not enough memory space to process this instruction.
0x0009 The memory control module address is invalid.
0x000a environment is incorrect.
0x000b tried to load a malformed program.
0x000c access code error.
0x000d data error
0x000e There is not enough memory space to complete the operation.
0x000f system cannot find the specified hard disk.
0x00 10 cannot delete the directory.
0x00 1 1 The system cannot move files to other hard disks.
0x00 12 has no file.
0x00 19 cannot find the specified sector or track.
0x00 1a cannot access the specified disk or floppy disk.
0x00 1b disk cannot find the required sector.
0x00 1c printer has no paper.
0x00 1d system cannot write data to the specified disk.
0x00 1e system cannot read the specified device.
The device connected to the system does not work.
A part of 0x002 1 file is locked.
0x0024 There are too many open shared files.
0x0026 reached the end of the file.
0x0027 Disk is full.
0x0036 The network is busy
0x003b An unexpected error occurred in the network.
0x0043 The network name could not be found.
0x0050 file already exists.
0x0052 Unable to create directory or file.
0x0053 int24 failed.
0x006b The program has stopped because no substitute disk was inserted.
0x006c disk is in use or locked.
0x006f file name is too long.
0x0070 Insufficient hard disk space.
0x007f The specified program cannot be found.
0x045b system is shutting down.
0x045c cannot shut down the factory system because there is no shutdown in progress.
0x046a There is not enough available server storage space to process this command.
The program specified by 0x047e requires a new version of Windows.
0x047f specified program is not a Windows or MS-DOS program.
0x0480 The specified program has been started, so it cannot be started again.
0x0048 1 specifies the program written for the old version of Windows.
0x0482 A library file required to execute this application is corrupted.
0x0483 No application is associated with the specified file for this operation.
0x0484 An error occurred while transmitting instructions to the application.
0x04b0 The specified device name is invalid.
0x05a2 window is not a child window.
0x05aa system resources are insufficient to complete the required services.
0x05ab system subsystem is not enough to complete the required services.
0x05ac system resources are insufficient to complete the required services.
0x06b9 Insufficient resources to complete the operation.
Stop message: 0x0000000A Fault (device installed) Description: IRQL_NOT_LESS_OR_EQUAL Common cause: the driver used an abnormal memory address.
Solution: If Windows 2000 can still be started, please check the relevant information displayed in the Event Viewer to determine the device or driver that caused the problem; Close or disable some newly installed drivers and delete newly installed add-ins; Remove some newly installed hardware; Ensure that the drivers of hardware devices have been updated and the system has the latest BIOS, and disable memory caching functions such as caching or shadow; In the BIOS; Run the system diagnostic tools provided by the computer manufacturer, especially the memory check; Check the Microsoft Compatible Hardware List (HCL) to ensure that all hardware and drivers are compatible with Windows 2000; Restart the computer and choose the last known good configuration to start the computer. Stop message: 0x0000000A failure (when adding new equipment)
Description: IRQL is not less than or equal to
Common cause: The driver used an abnormal memory address.
Solution: In the process of installing the block, the screen prompts "When the installer checks the hardware configuration of the computer, press F5 and select the appropriate computer type according to the prompt. For example, when the juice processor is a single processor, please select "standard PC"; Disable the memory cache function in BIOS, remove all adapter cards, disconnect all unnecessary hardware devices to start the computer, and then reinstall Windows 2000；; If the system is equipped with a SCSI adapter, please ask the adapter vendor for the latest Windows.
2000 driver, disable synchronous negotiation function, and check SCSI ID numbers of end connectors and devices; If the system is equipped with an IDE device, the IDE port is the main port. Check the master/slave/only settings of the IDE device. Remove all IDE devices except the hard disk; Run the system diagnostic tools provided by the computer manufacturer, especially the memory check; Check the Microsoft Compatible Hardware List (HCL) to ensure that all hardware and drivers are compatible with Windows 2000; Choose the last known good configuration to start the computer.
Stop message:: 0x0000001e failure.
Description: kmode _ expansion _ not _ handled
Common cause: Disk failure.
Solution: Check whether there is enough disk space, especially the newly installed one; Disable the drivers displayed in the stop message and all newly installed drivers; If the video driver used is not provided by Microsoft, please try to switch to the standard VCA driver or the appropriate driver supported by Windows 2000. Ensure that the system has the latest BIOS；; Choose the last known good configuration to start the computer.
Stop messages: 0x00000023 and 0x00000024 failed.
Description: FAT file system or NTFS file system.
Common causes: serious drive fragmentation, file I/O overload, third-party drive mirroring software or some antivirus software errors.
Solution: disable some anti-virus software or backup programs, and disable all defragmentation applications; Run chkdsk/f to repair the hard disk, and then restart the computer. Choose the last known good configuration to start the computer.
Stop message: 0x0000002E failed.
Description: Data bus error
Common cause: parity error in system memory.
Solution: Run the system diagnostic tools provided by the computer manufacturer, especially the memory check; Disable the memory cache function in BIOS; Try to start in safe mode. If safe mode can start the computer, try using the standard VGA driver instead. If this does not solve the problem, you may need to use another video adapter (compatible video adapters are listed in the Compatible Hardware List); Ensure that the drivers of hardware devices have been updated and the system has the latest BI0S；; Remove some newly installed hardware; Choose the last known good configuration to start the computer.
Stop message: 0x0000003F failed.
Description wenyu: no _ mor _ system _ ptes
Common cause: The driver is not completely cleared.
Solution: Delete some installed software, including backup tools or disk tools, such as defragmentation and antivirus software.
Stop message: 0x00000058 failed.
Description: FTDISK_INTERN_ERROR error error.
Common cause: Error in the main drive of the fault-tolerant set.
Solution: Boot the floppy disk with Windows 2000 and start the computer from the mirror (second) system drive; Choose the last known good configuration to start the computer.
Stop message: 0x0000007B failed.
Description: Unable to access the boot device.
Common cause: There is a problem initializing the A/O system (usually the boot drive or file system).
Solution: Check whether there is a virus on computer 1. This stop message usually appears when there is a virus in the boot sector; Use the repair console to repair the drive; Take out the newly installed hard disk drive or control card; If the system is equipped with a SCSI adapter, please ask the adapter supplier for the latest Windows 2000 driver, disable the synchronous negotiation function, and check the SCSI ID numbers of the terminal head and equipment; If the system is equipped with an IDE device, set the IDE port as the primary port. Check the master/slave/only of the IDED device. Remove all IDE devices except the hard disk; Run CHKDSK. If Windows 2000 can't start CHKDSK, you must take out the hard disk and connect it to another Windows 2000f system, and then use the CHKDSK command to check the hard disk. Choose the last known good configuration to start the computer.
Stop message: 0x0000007F failed.
Description: Unexpected kernel mode trap
Common causes: hardware or software problems, hardware failure.
Solution: Run the system diagnostic tools provided by the computer manufacturer, especially the memory check. This stop message often appears in the case of error or memory mismatch; Disable the memory cache function in BIOS; Attempt to remove or replace hardware and other peripherals; Check the Microsoft Compatible Hardware List (HCL) to ensure that all hardware and drivers are compatible with Windows 2000. This problem may be caused by an incompatible motherboard; Choose the last known good configuration to start the computer.
Stop message: 0x00000050 failed.
Description: PAGE _ FAULT _ IN _ NONPAGED _ AREA.
Common causes: memory error (data cannot use paging file).
Solution: Remove all newly installed hardware; Run all system diagnostic software provided by the computer manufacturer. Especially memory checking; Check whether all new hardware or software is installed correctly. If this is a new installation, please contact the hardware or software manufacturer to obtain any Windows updates or drivers that may be needed. Disable or uninstall all antivirus programs; Disable the BIOS memory option.
Stop message: 0x00000077 Fault
Description: Kernel stack page error
The usual reason is that the pages needed for kernel data cannot be read into memory from the paging file.
Solution: Use the latest version of antivirus software to check whether the computer has viruses. If a virus is found, execute.
Take necessary measures to remove him from the computer. Please refer to all the system diagnostic software provided by the manufacturer, especially the memory check; Disable the BIOS memory option.
Stop message: 0x00000079 failed.
Caption: Mismatch _ Hal
Common reasons: the hardware abstraction layer does not match the kernel or machine type (usually the configuration files of single processor and multi-processor are mixed in the same system).
Solution: To solve this error, you can use the command console to replace the wrong system file on your computer. The kernel file of a single processor system is Ntoskml.exe, while the kernel file of a multiprocessor system is Ntkrnlmp.exe. However, these files should correspond to the files on the installation media. After installing Windows 2000, no matter which original file is used, it will be renamed as Ntoskml.exe file. Hal files also use the name HAL.dll after installation, but there are several possible HAL files on the installation media.
Stop message: 0x0000007A failed.
Description: Kernel data page error
Common reasons: The pages needed for kernel data cannot be read into memory from paging file (usually caused by paging file failure, virus, disk controller error or memory failure).
Solution: Use the latest version of antivirus software to check whether the computer has viruses. If you find a virus, take necessary measures to remove it from the computer. Refer to the antivirus software documentation to learn how to perform these steps. If the computer has been formatted using the NTFS file system. You can restart your computer and then run the chkdsk/f/r command on the system partition. If the command cannot be started due to an error, please use the command console and run the chkdsk/r command. Run all the system detection software provided by the computer manufacturer, especially the memory check.
Stop message: 0xC000002 1A failure.
Description: Status _ System _ Process _ Termination.
Common causes: User mode subsystems, such as Winlogon or Client Server Runtime Subsystem (CSRSS), are damaged, so security can no longer be guaranteed.
Solution: Remove all newly installed hardware; If you can't log in, please restart your computer. When the list of available operating systems appears, press F8 and select the last known configuration option to start the computer; Run the recovery desk and let the system fix any detected errors.
Stop message: 0xc000022 1 failure
Description: status _ image _ checkisu7m _ mismatch
Common cause: The driver or system DLL is damaged.
Solution: Run the recovery console and allow the system to repair any detected errors; If an error occurs immediately after memory is added to the computer, it may be that the page file is damaged, or the new memory is faulty or incompatible. Delete pagefile.sys and restore the system to its original memory configuration.
I believe that with the above, everyone will know how to solve it when they meet the blue screen of the computer! Add the blue screen code, and you will understand what the blue screen is all about in an instant.