1. After the tallyman gets the delivery slip. According to the customer and port position on the landing paper, ask the driver to park at the gate; 2. The tallyman shall mark and receive goods by codes according to the data displayed on the landing paper;

3. When the tallyman receives the goods, all the goods must be in conformity with the landing paper. If there is any discrepancy, he shall immediately notify the supervisor; If it is found to be inconsistent with the landing paper, the goods can be received only after being signed and sealed by the supervisor;

4. When unloading, measure different types of cartons. When measuring cartons, choose a carton that is in good condition and has no deformation. The measurement result is written on the designated position on the landing paper;

5. When unloading, please indicate the license plate number, position, number of pieces per board and total number of boards on the care paper;

6. Sign-in: The tallyman should sign-in the number of goods on the landing paper, and sign-in in English;

7. Size calculation: Calculate the cubic number according to the length, width and height of the size measured at the time of receipt, and fill in the calculated size and weight on the landing paper. The number of CBM measured by the tallyman is the first-hand information of the customer as a container. If the measurement is inaccurate, it will lead to the situation that the spelled cabinet can't fit or is not fully loaded, so the measurement is very important;

8. Take the unloading paper to the supervisor after unloading. 1. When the tallyman gets the container loading information, he goes to the warehouse for container loading;

2. Before loading the cabinet, check the number and size of the cabinet, and check whether the cabinet is perforated or broken;

3. In general, when loading cabinets, the cabinets should be installed in the order of information.

4. When loading containers, the packing list and shipping marks shall be checked in turn, and the number of containers must be consistent with the container loading data;

5. Inform the supervisor immediately if any problems are found during loading;

6. After the cabinet is installed, the seal can be sealed only after it is checked correctly, and it is necessary to see whether the seal number is consistent with the given seal number.