Main Responsibilities of the Injection Molding Technician Position 1
1. Be familiar with the precautions, operate the machine correctly according to the operating procedures, make qualified products, truthfully fill in the molding daily report, and ensure that during the production process If there is an interruption during the operation, such as: machine repair, machine adjustment, mold change, material change, etc., the time when the incident occurred, what the incident was, and the time spent should be clearly stated on the daily report, and signed by the handling personnel for confirmation;
2. When each batch of production starts, take the initiative to deliver the first piece of the 2 molds to the production supervisor, and the quality inspection personnel will confirm it before production; carefully check the first piece and other samples, have the understanding and identification of adverse phenomena, and strictly Comply with quality standards;
3. When there are quality problems with the product or abnormalities in the machine, report it to the security and relevant supervisors in a timely manner, isolate and mark the defective products, and handle them in a timely manner; do a good job in self-inspection of the product , the middle and evening shifts must retain samples every 2 hours for quality inspection and confirmation. Any emergencies that cannot be solved by themselves must be reported to the supervisor in a timely manner. You are not allowed to adjust process parameters or repair molds without permission;
4. During production, be responsible for the recycling of returned materials, the feeding of materials during the production process, and timely notification of preservation according to the remaining amount; do a good job in cleaning waste products, material rods and machine tables, and send them to designated locations. It is strictly prohibited to waste raw materials, and Supervise each other;
5. Trim burrs according to inspection regulations. If the burrs are not repaired according to the regulations during the shift, you will not be able to get off work until the repairs are completed, and overtime will not be counted.
6. Do a good job in handover work. The operation status of the machine, the production status of the product, and the precautions during the production process should be clearly explained to the successor. If the person who hands over the shift fails to finish the work well, the person who takes over the shift can refuse to take over the shift and report it to the shift leader in a timely manner. If this happens and causes work delay, all consequences will be borne by the personnel on duty and punished;
7. Without permission, outsiders are not allowed to enter the factory without permission, and public property must be brought out of the factory with the signature of the company leader. The release slip of the child can only be taken out of the company after being verified by the guard. Once found carrying public property out of the factory without permission, the security will detain it and hand it over to the production department for punishment according to relevant regulations.
8. Obey leadership at work, cooperate with the foreman to complete work tasks, have the courage to assume personal responsibilities, and be responsible for the work you do.
9. Any failure to follow the operating procedures will cause losses. A fine of 50 yuan will be fined for each discovery, and 10 points will be deducted, and the penalty will be based on the raw material price. Main responsibilities of the injection molding technician position 2
1. Do a good job in the upper and lower mold work of each machine in the workshop, monitor the molds produced by the machine in the workshop, and prevent damage caused by human factors;
2. Responsible for machine process debugging and product quality control;
3. Responsible for mold lubrication (maintenance) and production operations;
4. Observe equipment operation conditions to prevent equipment The occurrence of faults;
5. Before leaving get off work, check whether the tools are complete and in place;
6. Keep records of equipment and molds that cannot be produced normally and report them for repair;
7. After receiving the mold transfer notice, you must quickly transfer the mold, and procrastination is strictly prohibited;
8. Responsible for the training of machine operators’ operating skills and guidance on work trials;
9. Assist in the 6S management of the machine;
10. Carefully fill in the operator handover record, communicate with the next technician face to face, and transfer information;
11. Responsible for the identification of equipment status, various form forming parameters of the machine, and inspection records of equipment molds;
12. Responsible for completing other tasks assigned by superiors. Main Responsibilities of the Injection Molding Technician Position 3
1. Comply with the company/department’s rules and regulations and operational management standards, and supervise employees in this class to strictly comply.
1.1 Assist the foreman to be responsible for the safety production management and organizational arrangements of the team, and supervise subordinates to strictly abide by safety production regulations and work in accordance with procedures and goals.
1.2 Based on the quality objectives/work objectives of the injection molding department, promote the development of various tasks of this team and achieve the completion of various work indicators of the department.
1.3 Assist the foreman to follow up/manage the quality, efficiency, output, delivery date, and raw material loss during the production process of the team.
2. Assist the foreman in the use/maintenance/maintenance of production equipment, molds, tools, and fixtures; promptly report or handle molds, raw materials, equipment, processes, quality, etc. that occur during the production process of the team abnormal problem.
2.1 Responsible for the communication and coordination of the team's affairs, and responsible for the training and supervision of the quality awareness of processing methods for the employees of the team.
2.2 Supervise the work quality and efficiency of the feeders. Go to the workshop 30 minutes in advance to understand the production status and precautions of each machine position, and do a good job in shift handover, machine inspection, inspection and handover (including production status "5S", etc.). You must also make written records and sign on the records for confirmation.
2.3 Organize a pre-shift meeting and convey the work requirements and precautions for the shift, summarize the existing problems on the shift, and do preventive work.
2.4 Responsible for following up the production status of each machine, whether the personnel arrangement is reasonable, making adjustments when necessary, and guiding the employees of each machine to operate the processing methods, quality self-inspections, and packaging methods as required, and strive to Reduce machine processing manpower, reduce energy consumption and improve production efficiency.
2.5 Follow up on the products produced by this class, and reworked products must be processed on duty; supervise the employees of this group to work according to the "5S" requirements to ensure that the "5S" area of ??this group is in a state of compliance.
2.6 Supervise the labor discipline of employees, promptly point out and correct violations of regulations and disciplines, and have the right to impose penalties when necessary.
3. Responsible for reasonable adjustments to the injection molding process, reasonable control of the production cycle, efforts to improve production efficiency, and ensure quality standards. Strictly control the occurrence of defective products as required, analyze the causes of defective products on each machine, handle and follow up in a timely manner, and report to superiors.
3.1 Strictly control the material usage of each machine, analyze and track machines or products that consume materials exceeding the regulations, find solutions, report them and implement them.
3.2 Work hard to learn new technologies and management knowledge, constantly improve yourself, and meet the needs of the company's development.
4. Responsible for the inspection and supervision of the product quality of this class, and record it in detail. Problems must be discovered in time and dealt with quickly, and strive to minimize the loss of bad products. Main responsibilities of the injection molding technician position 4
Mainly responsible to the foreman on duty, reporting work to him, and obeying his work arrangements and management:
1. Consciously abide by the company's various rules and regulations, Obey the arrangements of the workshop director and shift foreman, and proactively complete various tasks assigned by the workshop leaders.
2. Assist the foreman to complete the production work of this class, strictly follow the "Injection Molding Workshop Mold Operation Instructions" to ensure timely mold change and debugging, improve machine utilization and reduce time waste.
3. Participate in mold setting, mold testing, debugging, injection molding machine repair, mold maintenance, improve product quality, actively improve production efficiency, reduce unnecessary waste, and reduce company costs.
4. Make reasonable suggestions for improving production, quality, and working environment.
5. Responsible for checking the injection molding machine and peripheral auxiliary equipment. If you find problems that you can handle yourself, you should solve them quickly. If you are not sure, you should report them to the foreman or workshop director in a timely manner.
6. Strictly debug products according to the process cards formulated by the workshop. Process debugging must ensure quality, ensure quantity, reduce production cycle, save energy, reduce damage to injection molding machines and molds, and facilitate employee operation (less Raw edges, easy to pick up, no more processes).
7. When there is a problem with the machine, employees must rush to the scene in time to handle the problem and must not shirk each other. If they cannot handle it well, they must report it to the foreman.
8. After adjusting the machine, changing the mold, and repairing the machine, clean up the site in time, place the tools in their original positions or designated locations, and maintain 5S management in the workshop.
9. Supervise employees to operate in strict accordance with the "Injection Molding Operation Instructions" and "Injection Molding Machine Safety Operating Procedures", and be responsible for the safe production of the class.
10. Supervise and remind employees to conduct self-inspections during production, analyze and solve quality problems discovered by employees, and report in a timely manner if they cannot be solved.
11. Check whether the baking temperature of the raw materials on the machine meets the regulations and whether the raw material preparation is sufficient. If it is insufficient, promptly remind the foreman. If the production is stopped due to insufficient raw materials or insufficient baking, the technician will be held accountable for his failure to supervise and report. responsibility.
12. Supervise employees to fill in various reports before leaving get off work. If employees are found to be falsifying, they must promptly stop and correct their mistakes. If there are any disobedient employees, they have the right to criticize, educate and issue fines. Those who do not change despite repeated admonitions shall be reported to the foreman or The workshop director handles it.
13. Assist the foreman to complete shift handover tasks after get off work. (For example, what molds and materials need to be replaced for which machine, etc. must be reported to the relevant personnel of the next shift)
14. When the foreman is away, he can temporarily complete the work on his behalf.
15. Actively learn professional knowledge; quickly improve your work skills; take the initiative to develop your passion for work.