How to modify the name of the Nokia 5800w theme? If it can't be modified, how can I completely delete the theme installed in the card? How to change the name of the Nokia 5800w theme?

This font file is an indirect font, and the font driver is fontrouter.lt.for.v9.build20081109.opensigned.sis (installation requires self-signature, and can be installed on disk C or disk E).

=====================================================================================

Installation and uninstallation methods:

Before installation, please delete the font driver Font r outer and font files (including e:/fontrouter.ini c:/fontrouter.ini) from the machine or card.

1. Install font driver fontrouter.lt.for.v9.build20080619.unsigned.sis after signing.

2. Download the compressed package of the following fonts, decompress and copy the font file * *. Ttf to c:\data\fonts\ or e:\data\fonts\

3. Restart the phone, and your favorite fonts will be perfectly presented.

4. If you want to uninstall or temporarily block Font r outer (such as replacing a new font), you can use X-plore file manager to change the Enable= 1 in c:\data\fonts\Font r outer.ini or e:\data\fonts\Font r outer.ini to Enable=0, and then save, shut down and shut down. The font that comes with the system has been restored, and then you can delete the font driver fontrouter.lt.for.v9.build20080619 in the program management, and then the font file c:\data\fonts\**. Ttf or e:\data\fonts\*. Ttf can be deleted. If you want to change a new font, you don't have to delete the font driver.

(1) set Enable= 1 in Font r outer.ini to Enable=0, and then restart the phone.

(2) Delete the original font file in the fonts folder and paste the required font file.

(3) Change Enable=0 in Font r outer.ini to Enable= 1, restart the phone, and another font will appear.

Solve the problem of shaving head and tail

Modify the contents of Font r outer.ini and change the following values. The official default path of INI is under E:\DATA\FONTS.

After the change

FixCharMetrics = 0 = & gtFixCharMetrics= 1

Note that this is not the case. FixFontMetrics=0 is very similar, so post it to remind everyone that it doesn't matter if they are all changed to 1, but remember.

FixCharMetrics=0 must be changed to 1 in order to eliminate the phenomenon of shaving head and tail.

In particular, if the font is still shaved after this correction, please change the global zoom from 100 to 95 to 90 (each model is adjusted by itself, which is different).

Scaling = 100- Change it to about 95.

ZoomMinSize=0

ZoomMaxSize=48

ZoomRatio is used to scale all fonts, and the value is percentage (excluding "%"), and the default value is 100.

=======================================================================================================

Suggestion: (If you find that the font has a shaved head and tail, change it as follows)

1. If you think the default loading font is too small, you can modify the contents of the configuration file Font r outer.ini and set the.

ZoomRatio= 100

ZoomMinSize=0

ZoomMaxSize=48

The ZoomRatio of is used to scale all fonts, and the value is a percentage (excluding "%"). The default value is 100, which can solve the shaving problem (between 80- 120) if set properly. ZoomMinSize adjusts the menu (no more than 20), software name and font size of the desktop calendar, which is limited by ZoomRatio.

2. Some fonts have too shallow strokes. You can modify Chroma= 100 in the configuration file. Chorma is used to adjust the color depth of the font. When it is set to 0, the font is transparent!

3. In order to avoid possible incompatibility, it is not recommended to install the direct-mounted version. The directly installed version is more likely to have problems.

There are many kinds of fonts, not every font can be used on every mobile phone, and not every font is complete! Please learn the tutorial before you consider installing it yourself!

5. If you want to use the data cable directly after installing the font, you can only install the driver and font on the C drive.

Font driver (please sign it yourself) fontrunner.lt.for.v9.build20081109.opensigned.sis (36.45kb).

========================================================================

Font r outer.ini of font20081109 fontrouterlt can be changed freely.

The following contents are explained in Chinese! Font r outer.ini file of.

; Font r outer LT settings file, the first character of the comment line must be ";"

[Global]

; Global options section, in which all options will affect the overall function or effect.

Enabled = 1

; Whether to open the font r outer.

; Default value: 1

NativeFont= 1

; 1-GDR font is supported, but 0-GDR font is not supported.

; Default value: 1

LogLevel= 1

; Log details: 1- Fatal error only, 2- Error only, 3- Warning only, 4- All information, 5- Running error.

; Path where the log is located "C:\Logs\Font r outer"

; Default value: 4

Forced antialiasing =4

; Bitmap font settings (only applicable to SymbianOS 7 or later)

; 0- Default Effect

; 1- tends to "monochrome dot matrix effect"

; Two-force monochromatic lattice effect

; 3- tend to "anti-aliasing effect"

; Four-force anti-aliasing effect

; The 5-sub-pixel dot matrix format of Symbian 9.2 is preferred.

; 6- Forcing the Sub-pixel Lattice Format of Symbian 9.2

; Default value: 4

FixFontMetrics= 1

; East Asian font correction

; 0- No correction

; 1- Simulates Nokia Chinese font correction

; Default value: 0

FixCharMetrics= 1

; Automatically correct the incorrect correction of FixFontMetrics.

; 0- No correction

; 1- automatic correction

; Default value: 0

; The font file that is not enabled must be an absolute path, for example:

; disable font file = Z:\ Resource \ Fonts \ S60SC * * * c

; DisableFontFile=S60TCHK***c

ZoomRatio= 100

ZoomMinSize=0

ZoomMaxSize=48

; ZoomRatio is used to scale all fonts, and the value is percentage (excluding "%"), and the default value is 100.

; ZoomMinSize and ZoomMaxSize limit the range of global font scaling.

Chromaticity = 100

; Used to adjust the stroke depth of the font after the anti-aliasing display effect is turned on. This value is a percentage (excluding "%"), and the default value is 100. (Not valid for fonts without anti-aliasing).

ExtraFontFile=\Data\Fonts\*。 *

; Expand the font import path.

[font diagram]

; Font mapping part

*=*

; Format: font name [@ font height] = font name [@ font height] [:font parameters], font name [@ font height] [:font parameters]

; Font Name [@ Font Height] = Font Name [@ Font Height] [:Font Parameter]

; Font name [@ Font Height] =

; Among them, the first format is that standard Chinese and English are mapped to different fonts respectively; The second format is to use "alternative fonts" without distinguishing between Chinese and English fonts; The third format means that Font r outer will ignore the requested font and leave it to Symbian's own font mechanism (it seems that there is no effect of Font r outer).

; Font name: the font name defined in the font file, not the font file name (usually you need to get the font name contained in the font file from the font provider, and consider adding the function of displaying the font name in the next version of Font r outer).

; Font height: the unit is dot matrix. If it is not included, it means that all font heights are required to match. Note that the height used by Symbian system when requesting a font is not necessarily the actual height of the font, so it is generally not recommended to specify the font height.

; Font name-same meaning as above. The font height here refers to the height selected as the actual display font. Note that dot matrix fonts usually contain only one or several specific font heights, while TrueType fonts support a wide range of arbitrary font heights. Therefore, for dot matrix fonts, the actual displayed font height is only the height closest to the value specified here, which is not necessarily equal.

; Font parameters-You can adjust the special properties of the displayed font:

; Forced antialiasing

; Forced monochrome

; B tends to be bold.

; B tends to be thin.

; I tend to italicize.

; I tend to be vertical.

; Y<n> is adjusted by equivalent Y-axis offset (n means no adjustment).

; W<n> kerning adjustment (n not adjusted)

; L<n> line spacing (n not adjusted)

; Z<n> scaling (default: 100)

; C<n> color (default: 100)

; Where "y" represents the Y-axis offset of the adjusted font. When this parameter is not specified, Font r outer will automatically calculate the best Y-axis offset according to the relationship between Chinese and English fonts. However, due to the complexity of font format, the automatically calculated Y-axis offset may not be the best, so the "Y" parameter needs to be used for adjustment. The specific value to be adjusted immediately after the letter y, such as LatinBold 13:Y-2 or LatinPlain 12:Y 1.

; "A" and "A" indicate the forced use of "anti-aliasing" effect and "monochrome" effect respectively. This parameter takes precedence over global forced antialiasing.

; When the parameters are used together, they only need to be written continuously, for example: Arial:Y- 1A or Arial:AY- 1.

; For example:

; Sans MT 936_S60=*

; Sansmt [email = 936 _ s60 @11= Microsoft ]936 _ S60 @ 1 1 = Microsoft [/email] Yahei.

; sans MT[email = 936 _ S60 @ 12 = Microsoft]936 _ S60 @ 12 = Microsoft[/email]

[email = yahei @15: y-1] yahei @15: y-1[/email] time calendar menu information preview and information folder font.

; Sansmt [email = 936 _ s60 @16] 936 _ s60 @16 [/email] shortcut font options font menu business card Sans MT 936_S60 China mobile SMS font menu bar label.

; Sansmt936 _ s60 = frlt [email = dfgirl @18: y1] dfgirl @18: y1[/email] China mobile SMS font menu bar label.

; sans MT[email = 936 _ S60 @ 24 = FZLiBian-S02:w 1]936 _ S60 @ 24 = FZLiBian-S02:w 1[/email]

; sans MT[email = 936 _ S60 @ 30]936 _ S60 @ 30[/email]=

; S60 Third Special Option

Series 60 ZDigi=

; UIQ3 specific options

Equal width =

Eikon=

Symbol =

Calculate =

Calcinv=

Number =