BCCODE:D 1

Error code: 0x000000D 1 indicates that it is caused by a faulty driver. At the same time, defective memory, damaged virtual memory files and some software (such as multimedia software, antivirus software, backup software and DVD player software) can also lead to this error.

Solution:

1, dust removal, and plug all connections tightly.

2. Check whether the CPU, graphics card and motherboard are overheated, open the chassis and find out which fan (power supply, CPU and graphics card) is the problem. After turning off the power supply, remove the fan (be careful not to remove the heat sink, if it is removed, it should be coated with silicone grease), remove the dust, uncover the plastic oil seal, apply a little antifreeze lubricating oil or sewing machine oil to the roller shaft, seal it, and then leave it as it is. The fan is badly worn or damaged, please replace it with a new one.

3. Unplug the memory stick, clean the memory stick slot, rub the gold finger with the skin, change the slot, and then insert it tightly.

4. Reset the virtual memory, and set the virtual memory in a partition with relatively large space outside the C disk.

5. Check and repair disk errors. In "Open my computer-right click on the disk drive, which is in Error-Properties-Tools-Error Detection", start checking-check "Automatically repair file system errors" and "Scan and try to recover bad sectors"-OK.

Restart the computer and restart after the process is completed. Check and repair other partitions as described above. The hard disk is broken. Repair it or replace it with a new one.

6. Check the newly installed or upgraded drivers and software, and delete or disable the newly added programs or drivers.

7. Download the driver wizard from the Internet and update the drivers such as the motherboard, mouse and other pointers, network cards, graphics cards, sound cards, system devices, IDE controllers and serial bus controllers.

8. Replace the system CD and reinstall the system.