Current location - Quotes Website - Personality signature - Problems encountered when installing the system
Problems encountered when installing the system

Based on your question, I judge that you made a mistake when partitioning. You should check whether you have set it to active after formatting the system. If not, you may have a problem. As said.

The following is about installing the system, please refer to it!

If you want to reinstall the system, I can introduce you how to install it:

For how to install it, you can read the following article.

Reference materials:

It teaches you how to install single system, dual system, etc., with color pictures. I believe you will learn how to install it. My computer is also installed here

Method 1:

First, make sure your CD-ROM drive is the first boot sequencer and supports booting from the CD-ROM drive.

To install from a CD, you need to set the BIOS so that the system can boot from the CD. The method is as follows:

(1) Start the computer. When the Press Del to Enter BIOS Setup prompt message is displayed on the screen, press the Del key on the keyboard to enter the motherboard BIOS setup interface.

(2) Select the Advanced BIOS Features option and press Enter to enter the setup program. Select the First Boot Device option, and then press the Page Up or Page Down key on the keyboard to set the item to CD-ROM, so that the system can be changed to a CD-ROM boot.

(3) Return to the main menu and save the BIOS settings. (The saving method is: press F10, and then press the Y key)

(4) Then put the CD into the CD-ROM drive and restart the computer. The system will boot from the CD and display the installation wizard. Interface, you can follow the prompts to install and set up step by step.

After copying files to the hard disk in Windows XP, before restarting the computer for the first time, the CD must be removed from the CD-ROM drive, otherwise the system will still boot from the CD and execute the installation program in a loop.

Method 2:

Then, press any key to enter the optical drive boot mode and load the Mini version of the operating system.

Then, press Enter to continue the installation.

Then, press F8 to accept the license agreement.

Then, select the location you want to install, select a space large enough, and press Enter.

Then, select the file system, NTFS is recommended, and press Enter.

Then a scandisk will be entered and the installation program will be copied to the hard drive.

The computer will then restart after 15 seconds, press Enter to restart immediately.

Then, boot from the hard disk to continue the installation process. At this time, the graphical interface mode begins.

After completing a series of hardware tests, you will enter the region selection prompt, where you can configure the language, keyboard, and region.

You will then be prompted for your username and organization name, and a computer name will be generated that you can change.

You will then be prompted to enter the product registration code.

You will then be prompted for your administrator password.

Then, the component selection box will be displayed, select the Windows components you want to install.

Then, you will enter the time zone and time settings.

Then, enter the networking component installation (if your computer has a network card and it is correctly recognized during hardware detection).

After configuring the network, the computer will detect and install a series of Windows components and services.

Then, reboot and run the newly installed Windows.

Then, enter the final stage of the installation and monitor plug-and-play hardware that was not detected previously.

Finally, it’s ready to use!

Method 3:

Install the system (the following takes the installation of WINDOWS XP as an example)

I chose a complete Windows XP installation CD without any cracks . Start the computer, press Enter when the words "press any key to start the CD" appear, start copying the installation program, check the capacity and format of the system disk location, these can be ignored; what is the best when the file format of the system hard disk appears? AT32, do not choose NTFS. Although the NTFS file system has greatly improved the stability and speed of the operating system and the hard disk management function, NTFS only supports Windows NT, Windows2000, and WindowsXP with NT as the core, and does not support DOS, WindowsME, and Windows98. Therefore, it is not suitable for those of us who often play software. Once the system crashes, you may have to reinstall the system through repartitioning, formatting, etc. under NTFS. As long as the system is repartitioned, the information and data on the hard disk will be completely destroyed.

(This is a lesson I learned from countless losses. When I was using Windows 2000, I adopted the NTFS system, mainly to prevent the CIH virus from causing super damage to the system and hardware. But now it is too easy to prevent and kill CIH.) On the contrary , under the FAT32 file system, as long as you have a 98 or Me boot disk and format the C drive, you can reinstall the system without fear of losing all the data and information on the hard disk. (I won’t talk about partitioning here. I will talk about partitioning specifically in the future, including practical training of FDISK and DM. Partitioning is a more dangerous and troublesome thing.) Next, copy the system files and prepare for installation and other steps. A dialog box for selecting time zone, language, etc. appears, which I don’t need to explain. Be patient.

If you are installing XP originally under DOS, you must first copy the smartdrv.exe file (named smartdrv.exe in the Win98 installation directory) into the 98 boot floppy disk and run it before installation. Dramatically improve installation speed. (I sometimes run it before installation, and sometimes I forget it, but I don’t feel much difference. Maybe my computer has a larger memory? I can’t tell) If you are using the original system unchanged and the system hard disk Reinstall XP if you have a xx operating system. During the installation process, the "Upgrade/New Installation" dialog box will appear. At this time, you must choose to upgrade, unless you want to install a dual xx operating system on your machine. When asked to enter the serial number, enter the following number: BX6HT-MDJKW-H2J4X-BX67W-TVVFG This registration code can basically be installed (I have tried at least 5 or 6 XP installation CDs). Generally, the installation time does not exceed 60 minutes. After the installation is complete, choose not to activate now or activate later, click Next, fill in at least one name, such as JixXP, and press Enter all the way. That's it. Now let’s activate the system: I used the activation method of Russian hackers. See the instructions below: Method: Copy SETUPREG.HIV to the systemrootsystem32 directory and overwrite the original file (I couldn't find the SETUPREG.HIV, so I pasted it directly), restart, press F8 to enter safe mode, and log in as an administrator. Run WINXP_CRK.EXE, restart, enter WinXP, select "Telephone Activation" when asked to activate, fill in "401111" in each box - activation successful! Western Electronics provides downloads. Needless to say. I only tell you one word: great! ! !

4. Necessary settings and installation of some drivers

⑴ Enter the "Control Panel" (or right-click My Computer and then click Properties), open "System", Select "System Restore" and choose to turn off the restore function for all disks.

⑶ Generally, laptop sound cards, graphics cards, and modem drivers are all included in XP, and they can basically be installed automatically. Let me focus on desktop computers. Click "Control Panel", click "System", then click "Hardware", click "Device Manager", uninstall all items with question marks and exclamation marks in them, and click OK to close the "System" item. Take out the driver disk that came with you and put it into the CD-ROM drive; then click "Add Hardware" in the control panel. When the selection dialog box appears, if you know the directory and location of your driver, you can select it manually; if Don't know, choose automatic. The same method is used to install drivers for sound cards, graphics cards, and modems. If you don't have XP-specific drivers, there are two ways to solve your problem. First, you can use the Win2k (i.e. Windows 2000) driver of the plug-and-play device to install it. The kernels of XP and 2K are the same

and there is no difference in the driver. During the installation process, a dialog box without a Microsoft signature may appear. Ignore it and click "Yes" directly. If you don't even have a Win2k driver, there is only one other way. First, find out the manufacturer of your device. Generally, the manufacturer and model are printed on the manual or on the board or card. Then go to the manufacturer's website from a computer with Internet access, select the model and download it directly. Then use a floppy disk, USB flash drive, or removable hard disk to transfer it to your computer and install it. (The floppy disk has a small capacity, so I’m afraid it won’t fit.)

⑷ Graphics card settings: Click Display in the control panel. Other options can be selected according to your computer situation. It is best to choose 800×600 pixels and 32 true colors. Click "Advanced", click "Monitor", select 75HZ or 85HZ for the screen refresh rate of cathode ray tube monitors, and 60HZ for LCD monitors.

⑸ Set up the network connection. I won’t talk about the broadband settings. I will only talk about the settings for dial-up Internet access. Click "Network Connection" in the control panel, click "Create a new connection", click "Connect Intelnet", click "Manual Settings", click "Modem", then add a name such as: ***, phone number 16900, password Add 16900, and then add 16900 to verify the password. You can go online.

⑹ Sound Settings

Click "Sounds and Audio Devices" in the control panel, select "Put the volume icon into the taskbar", and click Apply; as for other options, you can Make relevant settings according to the actual situation of your computer and your own preferences.

5. Restore mailbox, account and address book. Follow the menu steps when exporting, change the original "Export" to "Import" and perform the xx operation. (No need to repeat it, haha, if you can't do the reverse, you are too stupid, so don't read this article)

6. Restore the font. Open the backup font information. If there is recovery, The program just clicks directly, if not, just replace it. This is mainly for the intelligent ABC and Ziguang Pinyin input methods. I have not used other input methods and am not familiar with them. You'd better research them yourself.

7. Reset My Documents. Repeat the export steps to merge and link the two folders.

8. It is recommended that you install the following practical software on your computer:

⑴ Winzip8.1 (universal compression software)

⑵ WinRAR3.2 (the best compression software) Software)

⑶ Microsoft OfficeXP (international office system)

⑷ AcadSee5.0 (graphic recognition software)

⑸Kingsoft PowerWord 2003 (instant English-Chinese translation software) )

⑹Kingsoft Antivirus 2003 (the best domestic anti-virus software)

⑺Winamp2.8 (the best Mp3 music player software)

⑻ WinDVD4.0 (DVD, VCD audio and video playback software)

⑼FlashGet1.40 (the best online download tool)

The above software is my favorite. Generally it can be downloaded from the Internet. Software such as Office XP, Kingsoft PowerWord, Kingsoft Internet Security, etc. are too large, so it is best to buy a CD to install them. In addition, it is best to install a system optimization software. Among the domestic system optimization software, Windows Optimization Master (author: Lu Jin) and Super Rabbit Magic Settings (author: Cai Xuan) are recommended. WindowsXP itself is extremely optimized, and further system optimization has no practical significance. However, WindowsXP does not have settings for the CPU's secondary cache. You can use either of these two software to optimize it. For example, the CPU L2 cache of my laptop is 256K. I did not go into the registry to reset it, but used Rabbit Magic to set it.

9. The last item is to defragment the disk. Open "My Computer", right-click c:, click "Properties", then click "Tools", click "Start Defragmenting", and finally click " Defragmentation", wait for defragmentation to complete and click Confirm. At this point, the installation is complete.

Method 4: Installation of Windows XP

Windows XP does an excellent job in upgrading and installing. There are also three installation methods: upgrade installation and dual-system storage installation. and fresh install. We can successfully upgrade to Windows XP based on the previous operating systems such as Windows 98/98 SE/Me/2000. The core code of Windows XP is based on Windows 2000, so it is very easy to upgrade and install from Windows 2000.

Let’s introduce the installation of Windows XP.

1. In the WINDOWS state, insert the CD and run it automatically. It will ask whether to install WINXP and select "Install Windows XP" with the mouse.

2. You can select "Upgrade (Recommended)" and "New Installation (Advanced)" in the selection box. When the language version is inconsistent, "upgrade" cannot be used and only a new installation is possible. There are no system compatibility issues with new installations.

3. Accept the agreement and enter the registration code.

4. Select Install support for East Asian languages, including Chinese. Select "Chinese (PRC)" as the language.

5. Click the "Advanced Options" option in step 5.

6. Enter the installation source directory in the text box required for "Copy installation files from this folder" ;

7. Enter the installation target directory in the text box required by "To this folder on my hard drive". Note that the target directory does not have a drive letter.

If you want to choose which drive letter to install on, check "I want to choose the install drive letter and partition during Setup" below.

8. "Copy all installation files from the Setup CD" is to copy the files on the installation disk to the hard disk. When installing using a bare disk, it generally does not copy the entire installation source file to the hard disk. Instead, it creates a list of copied files during installation and copies them according to the list.

9. "I want to choose the install drive letter and partition during Setup" is used to change the WINXP installation directory.

10. The "Accessibility Options" option in step 5 is the auxiliary option (only for people with disabilities).

a) If "Use Microsoft Magnifier during Setup" is selected, the font will be displayed very large.

b) Select "Use Microsoft Narrator during Setup" to "Use Microsoft Narrator". Each step has English voice prompts, which are very clear.

11. After restarting, select "TO set up Windows XP now, press ENTER" to install WINXP.

12. Disk format conversion, select "To convert the drive to NTFS, press C" to convert the FAT (or FAT32) disk format to NTFS format, and press "C" to confirm the conversion. Select "To select a different partition for Windows XP, press ESC" to reselect the partition (press "ESC").

13. Enter the installation, files are being copied, and the progress of copying files is displayed.

14. After the file copy is completed, enter the disk format conversion, and the disk format is converted to NTFS. After the conversion is completed, it will restart once, which is one more restart than if the disk format is not converted. After startup, it will be detected and the XP interface will be visible.

15. Select "Region and Language". When installing the English version of XP and wanting it to support Chinese, the options on this screen are more important.

a) Tip above: Set Standards and Formatting to English (United States) and Location to United States. If you want English XP to support Chinese (without installing the Chinese package), click "Customize", then set "Standards and Format" to "Chinese Simplified (China PRC)" and set the location to "China".

b) Tip in the middle: The default language and method for text input is the American keyboard. If you want to view or change, click "Details" and select "Install files for East Asian languages". Only English XP can support Chinese. Only "China" and "Chinese" can be selected in the "Region and Language" above.

16. Enter your name and company/organization name for registration. You can see this information later when you right-click "My Computer" and select "Properties".

17. "Text and input language" settings page, used to set language and input method.

18. Enter the computer name and system administrator password. XP does not use administrator login when it starts normally, and only appears in "safe mode" (only system administrators can log in in safe mode).

19. "Date and Time" settings: The drop-down box below is to select the time zone. In China, "(GMT 08:00) Beijing, Chongqing, Urumqi" should be selected.

20. Network settings: Generally select "Typical settings". If you need other protocols such as IPX, NetBEUI, etc., click "Custom settings" below. This can be changed in the network properties later and does not need to be set here.

21. Install the selected installation components, help files, etc., as well as install [Start] menu items, register components, save settings, and delete used temporary files. After restarting, enter the dazzling screen of WINXP (need to set up WINDOWS XP).

22. Register. Generally choose "Don't register now".

23. Enter the user name for this computer, which will appear in the login list. You can also add it in "Control Panel - User Accounts" after the system is installed. The user name entered here has the permissions of the system administrator and does not have a password. You need to create a password and change permissions in the "User Account". At least one should be entered. It is recommended to enter only one and add it later.

Method 5:

The purest new system:

Step one: Download an EVEREST Professional, first check your motherboard, memory, and hard disk There is no problem.

Step 2: Scan the boot area of ??your own hard disk and send some important data to the network hard disk or transfer it with a USB flash drive.

Step 3: As long as your boot area is OK. All the useful information has been transferred, and you need to prepare a DOS boot disk or WIN XP installation disk.

Step 4: Restart, boot from the CD, and format your entire hard drive. Don’t just block the system area or simply overwrite the installation. Instead, completely format the entire hard disk, repartition, and then Install. It only takes about 30-40 minutes.

Step 5: After entering the system, don’t panic to install the driver. First press Run: Start/Programs/Accessories/System Tools/System Information, and select "File Signing Utility" under the Tools menu. You can check if there are any files in your newly installed system that have not been signed by Microsoft. It stands to reason that if your WIN XP is genuine, then all of them should be signed. If yours is pirated, it does not rule out that the pirated disk itself contains There is a possibility of Trojan horses. It is recommended that if you encounter unsigned files, post them on the forum and ask experts if they can delete them. If so, delete them.

Step 6: After clicking on each driver, immediately download a Kabas machine version 5.0, go to their official website:

, remember to download the authorization KEY when downloading You can use it for free for one month. In my opinion, it is the best anti-virus software available for free download. The most important thing is that this can immediately ensure that your system will not be infected by viruses after reinstalling the system.

Step 7: Use kaspersky to scan for viruses, use the highest level, and scan for about 20 minutes. If it is confirmed that there is no virus, then congratulations, your favorite machine has been given a new lease of life.

The eighth step is to apply the SP2 patch immediately. Be careful to download it from Microsoft's website and not from other places.

The ninth step is to download the trial version of Skynet Firewall immediately.

The tenth step, quickly find a genuine anti-virus software that can be used permanently. KASPERSKY itself is indeed good and has a good reputation. Unfortunately, the price is too expensive, costing 450 yuan. It can be used as a temporary emergency. If you want It doesn’t matter if you don’t care about money. I once had a computer infected with a virus. I used Ruixing and Jiangmin, both of which are genuine and latest versions, and the virus was not detected. I found it with Kaspersky. Generally speaking, Rising and Jiangmin 2005 are enough, you can consider it yourself. Attention. In the above 10-step process, any piracy is basically eliminated (I dare not say about your operating system), so the new system should be pure.

Before completing the above 10 steps, please do not browse other unrelated websites, or download or install other programs locally. Finally, I believe that 99.9% of viruses will be 100% dead on your machine after so much trouble.

The truly perfect SP2 activation method---up to now, the only feasible activation method for the SP2 upgrade version of WindowsXP Professional. This has been since the official Simplified Chinese version of SP2 of WindowsXP was released on August 24, 2004. The only feasible SP2 activation method found through multiple comparisons and verifications---in my opinion:)

First download the official simplified Chinese version of windowsXP Professional and Service Pack2

Then install windowsXP Professional and Service Pack2 official simplified Chinese version

Finally activate windowsXP Professional Service Pack2

Specific steps:

In the first step, please prepare three necessary tools: NO. 1. 4-in-1 serial number calculator

A very efficient and accurate Microsoft serial number calculator. It is fast and the serial numbers calculated are almost all legal. This calculator can "compute" four versions of the Windows series: Windows XP Professional, Windows XP

Professional.VLK is the Shanghai Government Edition, Windows Server 2003 VLK, and Office XP. (Note: When calculating numbers, it is best to fill in other numbers in the Random Seed column as random seeds for calculating numbers.) (You can go to the Microsoft website to test the legality. Method: My Computer---Help menu-- -Select "Is this Windows legal?" or pass the test website: Click the Validate Now button, and then download the ActiveX control according to the prompts. If the Thank You! screen appears, it means you have passed the test. Congratulations, the WindowsXp SP2 you are using is Genuine!) NO.2, XP directory changer Keyfinder1.41

This software is used to view and change CDKEY, mainly to change some activation servers that have been marked as "illegal" by Microsoft. "Installation serial number:) NO.3. Online activation program 1.0 Currently, the activation method of SP2 must be activated online. This program is an effective online activation method developed in the SP1 era. Although in the SP2 era, there will be an error message during activation. , but it is still the only effective method to ensure smooth passage of Microsoft's activation server detection. Preparing these three tools is currently the only necessary way to activate Xp SP2.

The second step is to install WindowsXP Professional and SP2:

NO.1. Install WindowsXP Professional. Note that the installation serial number must be calculated with a 4-in-1 calculator. You can do this during installation. Make a note of the calculation beforehand, just in case something unexpected happens, and it is best to fill in the Random Seed at will and click Generate to generate it.

(The reason why we do not recommend the serial numbers provided in the vast number of pirated CDs and downloaded installation packages is because many people are using them. Since the user market with the same serial number is too large, it is easy to be banned by Microsoft! :) ( So fill in the Random Seed at will and click Generate to prevent the majority of lazy D version users from using 0 for seed generation and causing conflicts with the same serial number:) NO. 2. Install SP2 official Simplified Chinese For the official version, please note that you do not need to activate Windows XP before installing SP2.

The third step is to activate the SP2 version of Windows Make a Ghost clone backup.**Run the online activation program 1.0 (key step!!!)

(1) Click on the slightly stingy window with the mouse:)

(2 )Wait:)

(3) When the activation window appears, please select "Activate via Internet"

(4) You can choose not to register (you can also register, name, password, Email verification code. .., very troublesome:)

(5) Fill in the serial number used in the previous installation

(6) Click Retry

(7 ) an error message appears (be sure to ignore this step, it is normal)

(8) Restart the computer

(9) Do not directly run Activate Windows in the start menu

(10) Run online activation 1.0 again

(11) There are two situations at this time: A. It prompts that Windows has been activated! (You can jump directly to step 21:)

B. There is no success prompt and the previous interface is still repeated, so don’t worry, you are only one round away:)

(11) Still select "Activate via Internet"

(12) Do not register

(13) Pay attention here! ! ! Do not "fill in the serial number during installation" or click "Retry", but click "Phone"

(14) Select "Change ID"

(15) Use the 4in1 Calculator to calculate a new serial number

(16) Fill in the newly calculated serial number

(17) Click "Update" (18) and an error message will appear. Still ignore it

(19) Restart the computer

(20) Run online activation 1.0 again

(21) You should be prompted to activate in the second step Success!

At this point, WindowsXP Professional SP2 has been successfully activated. (If still unsuccessful, please keep repeating the above steps 8~20 until you lose patience: