Current location - Quotes Website - Personality signature - How to see the model of watch movement
How to see the model of watch movement
Question 1: What do you think of the watch? The movement model is usually marked on the back of the watch. For some watch models marked in the table, you can check the movement model corresponding to the watch model through official website or Baidu.

Question 2: How to tell where the movement of a watch is made? 1. Look at the moving surface.

(1) From the moving surface,

Some important moving parts are easy to see on the surface and the pendulum splint, such as shock absorbers. Different companies have different grades. Triangle shock absorbers are generally used in low-grade products, but fake watches are more common. The better one is made of INCBLOC, and high-end watches generally use KIF for shock absorption, such as Rolex, Vacheron Constantin, Patek Philippe, Audemars Piguet and so on. If you look closely, you will find that even the same movement, the specifications of the shock absorber are different. For example, Omega Omega and Tito both use ETA 2892 movement, but Tudor uses KIF and Omega uses INCBLOC. High-end watches have high-end traditional practices. Usually, the combination of KIF shock absorber and a worm-type fine adjustment structure (called "Autrist") is the symbol of high-end watch movement, and at least the fine adjustment mechanism of "eccentric screw" is used.

(2) Material technology:

In addition, the parts that are easy to see are the escape wheel and the escape fork. The middle and low-grade movement uses a copper escapement fork, and the surfaces of the escapement wheel and the escapement fork are not polished. The advanced movement uses a steel escapement fork. (Because the specific gravity of steel is small) The surfaces of the escapement wheel and the escapement fork are polished, and the steel parts are also polished. The movement splint is decorated and polished, which is a major feature of the high-low meter movement.

Balance wheel: the balance wheel of a high-end watch must be gold. In fact, the material of the balance wheel is different. General watches are made of zinc-copper alloy (Deutsche Bank), while beryllium alloy (BE) of high-grade watches is aviation material, which is light and hard, mainly because the temperature line expands slightly, which can ensure the accuracy of watches.

High-end watches are marked in Geneva (12 process requirements).

Color of moving surface:

The common movements made in Chinese mainland (including quartz watches) are ETA and Ronda, and the Japanese (MIYOTA) is Citizen. Generally, Swiss parts are engraved on the splint of the movement, which is generally assembled by the Far East (Thailand), and the gold-plated movements on the splint are mostly local.

(3) Identification of moving splint:

In the past, many watches were made by their own sports, such as Jaeger-LeCoultre, Movado, Omega Omega, INEGER ENICAR, Longines and so on. , known as the "universal watch factory". Now, in order to control the cost, they are all buying movements, mainly ETA movements from Switzerland. Switzerland, Switzerland, Australia, FHF and Switzerland used to have many movement factories, but now there are almost none. )

Almost used RONDA (quartz watch), everyone uses ETA. In order to distinguish, we mainly carve our own logo on the automatic tuo. Because automatic tuo is a kind of metal with a relatively large proportion, we can't punch holes and lettering. Quartz watches print their own watch cards on the circuit board. Cartier also uses ETA, but it has its own special splint.

In addition, mechanical watches generally have a set of special letters on the edge of the balance wheel position of the main splint of the movement.

Every watch has its own label, so you can see it by storing it in different machines.

In addition, some famous brands of big watches will also use ETA movement, but they are generally finely processed (polished).

Another feature is to number and name the movements by yourself, such as Longines, Radar, Ingrid (such as Ingrid ETA 267 1, and the bottom plate of the movement is engraved with ar 770. It was once announced that if there is no AR on the bottom plate of the movement, it is a fake watch! )

Reading label

Some watches have magic labels on the back cover: Rolex, for example, the fake watch is just a piece of green paper, which has no magic effect. TITONI in the early plum blossom period also made the magic color label on the back cover quite well.

3. Look at that subtle look:

The so-called subtlety mainly refers to the craftsmanship of the dial and the hands, which can best explain the problem here. The hands of fake watches are rarely done well.

For example, the needle is hanging down, the needle is uneven, the brightness is not good, and the angle of the needle is not clear.

Like the real Rolex watch, the tail of the second hand is round, while the fake watch is flat. And some quartz watches have thickened second hands for balance and so on.

Look at the watch and English signs and scales.

The printing of real watches like Rolex is unique, with bright paint and high printing degree. Fake watches can't do this. I often see some fake watches, such as Rolex and Earl, which are not only blurred, but also can't be completely covered.

Name >>

Question 3: How do I know the model of the watch movement? Hello, if it is convenient, please provide the model of the watch so that I can check the model of the movement for you. Method for inquiring the model: The model of the watch case is engraved on the bottom cover of the watch and expressed in the form of XXXX-XXXXXXX (for example: 8200-S77732).

Question 4: What do you think of the movement model of Seagull Watch? Generally, the error of watches is around 10, so it can't be said to be better. As you know, you have to rely on luck to buy China products (it is possible to buy observatory-level products. ....

Question 5: Swiss watch movement model 2824-2, automatic machine, 25 diamonds, 38-hour power, fast pendulum 28800, hourly vibration frequency, movement blank machine, engraving machine, Swiss general brand are used more, the overall quality is very high, the price is reasonable, radar, Tito, Meihua, Rome, Sima, Yingna, Cartier and many other brands.

2846 automaton 2 1 drill, 49-hour power ` 2 1600/ hour vibration frequency, travel accuracy is not as good as that of 2824, which is a cheap model. It is often used in some small brands of watches, such as Swatch 2846, and generally domestic watches with Swiss movement will also be used.

2892,21drill, 42-hour power ` rapidly swings at the earthquake frequency of 8800/ hour, which can be seen by many brands in the high-end models of ETA. It is stable and accurate, but it is also difficult to wind. From the mid-range Swiss brands to the world's top brands, even some independent watchmakers often take 2892 as their simple basic core, Cartier, Chopin and Wanguo. In addition, 2750 2752 2753 2789 is universal.

Question 6: How to see the model of the watch? 2. Identification of appearance and action.

From the appearance, the trademark and brand handwriting marked on the dial and back cover of genuine watches are clear and complete; The number of drills marked on the dial is the same as that on the dial.

The actual number of drills in sports is consistent; The material marked on the back cover is consistent with the material used in the case; Watch glass is bright and clear; Shell assembly

The external edges and corners are not sharp; The coating has no bubbles and does not fall off. Trademark and brand handwriting marked on the dial and back cover of counterfeit genuine watches

Fuzzy; The number of drills marked on the dial is inconsistent with the actual number of drills of the movement; The outer edges and corners of the shell assembly are rough, and the coating is blistered, peeled off or matched.

Fracture and other phenomena.

From the movement point of view, the splint or thallium in the genuine watch movement is marked with the corresponding trademark card; The movement is in the case group

2 1

Stable in works; Clean the inside of the movement. There is no trademark logo on the splint or thallium of the counterfeit watch movement, or the trademark logo is written in bold.

Rough, fuzzy, skewed, or simply pasted with small copper sheets; The movements are not clean, and some movements contain copper pieces, hair and fingers.

Line, etc.

3. Identification of sales price

The price of imported watches is stable for a certain period of time. For example, Japanese brand watches cost 2500\3000 yuan;

Swiss brand watches, the price is more than 10000 yuan, and some brand-name watches are as high as tens of thousands or even hundreds of thousands of yuan, like old ones.

Alex, Tudor, Omega, Earl, etc. Generally speaking, for imported watches below the above price, if there is no special reason, you can

Suspected counterfeit imported watches or watches from improper sources.

4. Identification of inspection marks

When buying imported watches, consumers should check the seller's commodity inspection certificate and the number on the laser imitation label.

Within the quantity listed in the certificate. There are many other methods to distinguish authenticity, such as detecting gold content, travel time accuracy,

Waterproof performance, watch glass hardness, true and false diamonds, etc. Verify the data and instructions marked by imported watches through measured data.

Are consistent, to determine the authenticity. In addition, some famous watches are unique in their movement structure and inherent special memory.

Identification method, but professional equipment and instruments are needed for inspection.

Evaluation of 20 famous watch brands (brand, evaluation and classic products in turn)

1 Is the name of Breguet Watch King a wave, moon and energy storage display meter?

Audemars piguet, a century-old brand, can also grow a young face. Royal Oak Watch Series

3 Jaeger-LeCoultre classic perfect movement never outdated flip table

4 Zippo Girard Perregaux's unstoppable Ferrari watch series

5 Athens Ulysse Nardin coarse European design GMT

Zenith's vitality comes from the rainbow flying back chronograph of the movement.

7 Rolex Rolex, a special watch for the older generation, and an oyster double calendar.

8 Cartier women's intimate friends are in Cartier, and men and women all know that they have reached the mountain.

9 Yubao Ebel is better than Cartier 19 1 1.

10 TAG Heuer Sports and Luxury Car Sales

1 1 Breitling pilot's favorite timer

12 Omega Omega can still give birth to a seahorse diving watch for a long time.

13 Longines miss the past glory-Cunderberg series

14 rado high-tech ceramic case, cool and precise ceramics.

15 The daily shuttle price will be automatically transmitted on time.

16 the traditional machinery of Hollysys Orris can become the crown of new fashion.

17 Movado Museum, with simple method and elegant style.

18 Jean d'Eve, Jane Duffy, Sektora, Artist's Choice

19 plum Titoni Swiss quality, unpretentious universe series

Seiko Seiko Maybe future watches should be made like this.

Top ten watches in the world

Of course, the top ten watches in the world are monopolized by the small country of Switzerland. The following is the ranking list:

Patek Philippe: a symbol of nobility ...>

Question 7: How to check the model of the watch? The automatic mechanical watch is on the automatic watch, the winding mechanical watch is on the movement, the quartz watch floats on the center splint, and there is no back cover or surface at the above positions.

Question 8: It is difficult to tell whether a watch is a Swiss movement or a domestic movement. Several domestic manufacturers of several movements are imitating Swiss movements, such as Seagull, Hangzhou, Shanghai, Dandong and Guangzhou. The main models are 2824, 2892, 7750, which is also the most common ETA movement on Swiss watches. Because it is an imitation, it is difficult to see the appearance clearly, such as Shanghai. It is said that it is improved on the original basis, but this movement cannot be seen without disassembly. At first, some cousins thought that they could be distinguished from shock absorbers, but it turned out that both shock absorbers were used in the original movement of ETA, not the method. As for the stability, the domestic imitation core, such as Gulfstream, has good stability, which is not much worse than the low-end core of ETA. A watch repairman told me that he had handled it. It is not easy to keep the daily difference at 2-3 seconds. Generally speaking, everyone thinks that the durability of domestic movements is not as good as that of Switzerland due to material problems, and the accuracy is easy to decline after a long time, but it can't be observed for a year or two. Of course, I'm not saying that there are endless imitation cores in China, some of which are of poor quality, but some high imitation watches are worth thousands, but the 2824 of a seagull is less than 300, so there is no pressure to use them at all.

In short, for beginners, there is almost no quick way to know how to distinguish, which still depends on the experience accumulated after many contacts. However, we can still see some doorways from the price. For example, the Swiss mechanical watch is basically not less than 3000, and the Observatory is not less than 8000, and the 7750 code watch is close to1w. There are two resolutions that cannot be counted as 100%. The first one is for seagulls. Because seagulls especially like to scale the movement, and this looks beautiful and upscale, and many watches like to use it, so once you see the movement covered with scales, you should be careful. On the other hand, take out the watch handle for one second and look at the balance wheel of the movement. There is a saying that ETA uses different balance wheels on different grades of movements. The column on the balance wheel at the low end is straight, and the column at the high end is fixed.

Question 9: What kind of mechanical watch movement is good, and how many diamonds are generally used to represent it? The more diamonds, the better the quality of the watch.

Question 10: What do you think of the movement of a mechanical watch? The score of 65,438+000 is usually evaluated in terms of accuracy, seismic resistance, manufacturing technology and materials.

Patek Philippe, Vacheron Constantin, Audemars Piguet, Jaeger-LeCoultre, Rolex, most of them use their own self-made mechanical movements with good precision and excellent production. The movement of precious metal watches is also made of many precious metal materials, and the daily error of the certification level of the Observatory reaches plus or minus 5 seconds. These well-made movements are mostly shown to the master in the form of back-penetration, which is actually to show people their superb skills and mechanical beauty. )

Other brands prefer to use outsourced movements (some of which have been modified), and the most common one is ETA movements, whose accuracy is obviously lower than the above. In addition, materials and manufacturing processes are not on the same level as above.