Purchase and sale contract template 1

Seller: (hereinafter referred to as Party A)

Buyer: (hereinafter referred to as Party B)

1. This contract is concluded in accordance with the Contract Law of People's Republic of China (PRC), and comes into effect after being signed and sealed by both parties, and both parties must strictly perform it.

Product name, model, quantity and unit price:

2. Quality requirements and technical standards shall be accepted according to the standard of "cold setting corrugating machine", and the objection period shall be one month. A set of special tools. The speed of corrugated board production line is 60-80 meters (per minute), and the speed of double-core corrugated board is 40-80 meters (per minute). The supplier is responsible for connecting the five-layer corrugated board production line with the three-layer paperboard laminating machine, and producing double-core corrugated board (five-layer paper) which can be compounded with colored tissue paper on the three-layer paperboard laminating machine. Specific matters will be discussed after the buyer's five-layer corrugated board production line equipment is installed. Technical agreement:

Three, the supplier's product quality and service conditions and time limit:

1, free installation and debugging, free training of personnel, warranty within the day after the goods arrive at the buyer, and lifelong service.

2. In case of man-made damage or accident during and after the warranty period, the buyer shall bear the cost of maintenance materials, round-trip transportation expenses of service personnel and local accommodation expenses;

3. Consumables and wearing parts are not covered by the warranty.

Four. Time and place of delivery:

1. After the buyer pays the down payment after signing the contract, the supplier will prepare the equipment within-days.

2. After the buyer pays the delivery money, it will send the equipment to the buyer including the supplier.

Verb (abbreviation of verb) mode of transportation and expenses: transportation and expenses shall be borne by.

6. Packaging standards and packaging materials supply: provide packaging standards, and packaging materials will not be recycled.

Seven. Settlement method and time limit:

1. Ask the supplier to pay the contract amount as a deposit within one day after signing the contract;

2. Before delivery, the supplier shall be paid the delivery amount of the total contract amount;

3. Payment should be made in cash (the buyer's wire transfer or bank remittance should be remitted to the supplier's bank account), and the ownership of the equipment belongs to the supplier before the payment is paid; Without the consent of the supplier, if the buyer pays the payment to other personnel in cash or other ways, Party A will not recognize it.

4. The buyer shall provide the invoice after full payment;

Eight, acceptance criteria and methods:

1. After receiving the goods, Party B shall conduct inspection in accordance with Article 2 of this contract, and conduct acceptance according to the invoice, and the authorized person of the buyer shall sign the acceptance; And issue a receipt confirmation (fax or email) stamped with Party B's official seal to the supplier, detailing the names and specifications of the listed goods.

2. Operation acceptance: after the installation and commissioning, after the trial production, both the supplier and the demander will carry out acceptance according to the second standard, and the authorized personnel of both parties will sign for confirmation;

3. After the trial production, if the acceptance is not organized due to the buyer's reasons, the equipment shall be deemed to have passed the acceptance.

9. Liability for breach of contract: according to the Contract Law;

10. Method for resolving contract disputes: both the supplier and the demander shall negotiate for settlement; if negotiation fails, a lawsuit shall be brought to the local people's court.

XI。 This contract is made in duplicate, one for each party, and shall come into effect after being signed and sealed. Fax is valid and has the same legal effect.

Twelve. For matters not covered, both parties shall sign a supplementary agreement through negotiation, and the supplementary agreement shall have the same legal effect as this contract.

Thirteen. Other agreed matters:

1. The Buyer shall provide transportation and accommodation for the Seller's local installation and commissioning personnel.

2. The buyer allows the supplier's customers to visit the equipment, and keeps the price and technical data of the supplier's equipment confidential.

Party A (official seal): _ _ _ _ Party B (official seal): _ _ _ _ _

Legal representative (signature): _ _ _ _ _ Legal representative (signature): _ _ _ _ _

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

Purchase and sale contract version template 2

Party A: ContractNo.:

Signing place:

Party B: Signing time:

Second, the buyer's manufacturing and acceptance quality standards or requirements:

1. Design and manufacture according to the drawings provided by Party A and the design drawings of steel formwork products provided by Party B, and Party B can put into production only after being signed and approved by Party A (electronic drawings and letters can also be confirmed and replied by Party A).

2. The first set of steel formwork manufactured by Party B must be assembled in the factory, and can only be loaded and manufactured after Party A's acceptance.

3. Delivery method: Party B is responsible for transportation expenses and Party A is responsible for unloading.

Four. Place of delivery:

Verb (abbreviation for verb) settlement method:

1. Party A prepays 20% of the whole batch of steel formwork, that is, RMB four hundred thousand Yuan only (￥ 400,000). With the bank payment slip as proof, the construction period is calculated from the date when the advance payment arrives, and the steel formwork is transported to Party A's construction site. After Party A's acceptance, Party A will pay 80% of the money for this batch. ..

2. Calculate the theoretical weight according to the drawings and settle the payment.

3. After-tax service has been included in the above unit price.

Six, both parties signed and sealed, the contract will take effect after receiving the advance payment.

Seven. This contract is made in duplicate, one for each party.

Eight, steel mold quality and processing technical requirements, steel mold specifications, quantity list and drawings as attachments to the contract and the contract shall take effect at the same time.

Nine. Settlement of contract disputes: in case of disputes, both parties shall settle them through consultation; If negotiation fails, it shall be handled in accordance with the Contract Law of People's Republic of China (PRC).

Party B: Party A:

Address: Address:

Authorized Agent: Authorized Agent:

Bank of deposit: Bank of deposit:

Account number: Account number:

Tel: Tel:

date month year

Purchase and sale contract version template 3

Supplier: (hereinafter referred to as supplier)

Demand side: (hereinafter referred to as demand side)

I. Product name, specification, quantity and unit price:

Specification of antifreeze for central air conditioning water system: 25kg/ barrel. Quantity: 350 kg, unit price: 6.00 yuan/kg. Freezing point: (-25℃). Ethylene glycol antifreeze.

Payment amount: RMB 2 100.00 Yuan (in words: RMB 2100 Yuan only), excluding freight, and only national tax stamp can be issued.

Second, the quality requirements delivery date:

(1) All the indexes of antifreeze meet the national sh/t052 1- 1999 standard. The warranty period for normal use of central air conditioning water system is 3 years. See the specification for specific performance parameters of other antifreeze.

(II) Date of delivery: Delivery shall be made within 2 days from the date when both parties of the contract affix their seals to confirm the effective payment.

Three. Packaging requirements: the supplier uses special plastic barrels for packaging.

Four, delivery (delivery), acceptance and payment settlement:

(1) The supplier adopts express logistics, and the location is designated by the buyer. The freight is paid by the buyer.

(2) The buyer shall use the goods according to the technical specifications provided by the supplier after receiving the goods.

(3) The buyer shall pay the full amount in advance.

Verb (abbreviation of verb) supplier's liability for breach of contract:

(1) The supplier must deliver the goods according to the quality standards agreed by both parties, otherwise, the buyer demands to return the goods and refund all the payment.

(2) If the supplier fails to deliver the goods within the time limit stipulated in the contract, it shall pay compensation of 0.5 ‰ of the contract price every day.

The buyer's liability for breach of contract:

(1) During the execution of the contract, if the buyer returns the goods without justifiable reasons, the supplier will charge twice the round-trip freight as compensation.

(2) If the buyer fails to make payment within the time limit stipulated in the contract, the buyer shall pay a late fee of 0.5 ‰ of the contract price every day.

(3) If the buyer fails to raise an objection within the time limit stipulated in the contract, it shall be deemed that the quality of this batch of products conforms to the contract.

Seven. The faxed copy has the same legal effect as this contract.

Eight. Any dispute arising from the execution of this contract shall be settled by both parties through consultation. If negotiation fails, it can be brought to a people's court for settlement. This contract is made in triplicate, one for the seller and two for the buyer.

Supplier: (seal) Buyer: (seal)

Year month day:

Purchase and sale contract version template 4

Supplier (hereinafter referred to as Party A) Ecological Breeding Co., Ltd.

Demander (hereinafter referred to as Party B)

Signing place:

Signature time:

In order to better promote and develop the local chicken industry, Party B voluntarily cooperates with Zhuanglang Binhui Ecological Breeding Co., Ltd., and in order to clarify the interests and obligations of both parties, according to the provisions of the People's Republic of China (PRC) Contract Law, both parties reach the following agreement:

1. Chicken seedling variety, quantity and price: Party A provides Party B with * * * chicken seedlings; The unit price is RMB/unit, * * * yuan, sample of the purchase and sale contract of chicken seedlings.

2. The emergence time is agreed with the delivery place at the time of feeding: the delivery place is:

III. Contract Amount and Payment Method The total amount involved in this contract is RMB (in words). Party B shall book chickens in advance and pay a down payment (50% of the total amount) of RMB (in words), and the remaining RMB (in words) shall be paid three days before the chickens of Party A are hatched without delay; All payments will be paid in one lump sum by cash or bank transfer.

Fourth, the relationship between power and responsibility.

1. Party A shall provide authentic native chicken varieties to Party B;

2. If after a period of time, Party B finds that more than 10% of chicks are not the varieties specified in the contract, and it is found to be true after identification by the relevant quality inspection department, then Party A shall compensate Party B for the economic losses according to the breeding cost of Party B and the excess;

3. Party A shall inject Marek's vaccine into chicks within 24 hours after hatching, and ensure that the inoculation density is not lower than 98%;

4. Party A guarantees that the survival rate is above 95% within one week (excluding human factors such as gas, temperature and drug poisoning);

5. The identification rate of male or female seedlings provided by Party A for Party B is above 90%;

6. Party A shall provide Party B with the packaging required for transporting chickens;

7. If Party A fails to deliver the goods on time or the quantity is insufficient for some reason, Party A shall compensate Party B for its economic losses. Party A shall not only refund the payment for the insufficient quantity, but also compensate each chicken for the insufficient quantity of 0. 2 yuan;

8. Party A shall notify Party B of the date of picking up the chicken at least three days in advance, and the chicken ordering households must pick up the chicken according to the notified date. If the chicken is not picked up at the due date, all the down payment shall go to Party A, and Party B shall compensate Party A for other losses.

9. If Party B doesn't want or delay to have chicks for any reason, it shall notify Party A 18 days in advance, and the model contract is Model Purchase and Sale Contract for Chickens. During this period, the losses caused to Party A shall be compensated by Party B, and the down payment shall be owned by Party A, plus 0. 5 yuan for each chicken.

10. If there is any change in Party B, it is necessary to inform Party A before Party A sows the eggs, so as not to cause unnecessary losses to both parties.

1 1. During the brooding period, Party A shall not be responsible for the losses caused by non-maternal diseases.

12. After the chicken is delivered, the losses not caused by the manufacturer's responsibility shall be borne by Party B, and Party A shall not be jointly and severally liable; If it is determined by the relevant departments as the manufacturer's responsibility, Party A shall compensate the relevant losses.

13. During the execution of the contract, if one party is unable to perform, fully perform or correctly perform the contract due to natural disasters or other force majeure reasons, it shall inform the other party of the reasons, and will not be liable for breach of contract after being confirmed by the relevant competent authorities, and it is allowed to modify or terminate the contract.

14. If the payment cannot be made on schedule through bank settlement, Party A shall pay the liquidated damages for delayed payment according to the regulations of the People's Bank of China.

15. If Party A delivers the goods as stipulated in the contract, and Party B refuses without justifiable reasons, it shall pay Party A 50% of the total value of the rejected goods as penalty, and also bear the actual losses and expenses caused by Party A.. ..

Fifth, traffic.

The transportation expenses shall be borne by Party B. Party B shall make good preparations for picking up chicks, including disinfection in the brooding room, temperature and humidity control and debugging of various related equipment, and the losses caused thereby shall be borne by Party B..

If Party A needs to be entrusted to transport chickens, Party B shall pay the transportation fee in advance and receive the goods on time at the receiving place. The losses caused by Party B's failure to receive the goods on time at the agreed receiving place shall be borne by Party B. ..

Sixth, others.

1. Any dispute arising from the performance of this contract shall be settled by both parties through consultation. If negotiation fails, it shall be arbitrated by Party A's local labor arbitration committee. Or Party B may bring a lawsuit to the people's court where Party A is located.

2. Matters not covered in this contract shall be implemented in accordance with the Contract Law of People's Republic of China (PRC). Any supplement shall be published in writing. This contract is made in duplicate, each party holds one copy, which has the same effect.

3. This contract shall come into effect from the date of signature by both parties and shall be valid until.

Supplier (Party A) Demander (Party B):

Party A (signature): Party B (signature):

Tel: Tel:

Year, month, year, month, year

Purchase and sale contract version template 5

Supplier: _ _ _ _ _ _

Demand side: _ _ _ _ _ _

1. This contract is concluded in accordance with the Contract Law of People's Republic of China (PRC), and has legal effect after being signed and sealed by both parties, and both parties must strictly perform it.

2. Contract terms and payment methods:

The total value of products ordered by both parties is RMB 694,465,438+00. Product name, specification, quantity, unit price and total price are as follows: after the sample is confirmed, the buyer will pay 20% of the contract amount as a deposit. Within 1 day after the delivery of the goods by the supplier, the buyer will transfer the remaining contract funds to the supplier's account, and the supplier will provide the buyer with an invoice of the same amount after confirming the payment.

3. Economic responsibility:

(1) If the supplier fails to perform the contract, it shall bear the following responsibilities:

① The product specification and quality are not in conformity with the contract: if the buyer agrees to use it, it will be priced according to the quality, and the total returned value will be depreciated; Can not be used, should be responsible for the return and replacement. Due to the delay in delivery time, pay the buyer a fine of one thousandth every day. (2) The quantity of products does not meet the requirements: the buyer still needs less photos; If it is not needed because of the delay, it can be returned and bear the losses caused by it; If the goods cannot be delivered, the buyer shall pay a penalty of 1% of the total value of the undeliverable goods.

(2) When the buyer fails to perform the contract, it shall bear the following responsibilities:

(1) Change the design, variety, specification, quality or packaging specification of the product halfway, and pay a penalty of 1% of the total value of the changed payment (or packaging value).

(2) If the goods are returned midway, both parties agree to pay a penalty of 1% of the total value of the returned goods according to the actual situation.

(3) If the self-delivered products fail to pick up the goods on the specified date, a fine of one thousandth of the total delayed delivery price shall be paid to the supplier for each day of delay.

(4) If the payment is not made on the specified date, a fine of one thousandth of the total deferred payment shall be paid for each day of delay.

(3) Product price: If it needs to be adjusted, it can only be changed by both parties through consultation.

(4) If either party wants to terminate the contract in whole or in part, it must give sufficient reasons, negotiate with both parties and report to the appraisal organ for the record.

(5) If the execution of the contract or delayed delivery is really affected due to natural disasters and other reasons, the other party shall be informed, and the fine may be reduced or exempted as appropriate after being proved by relevant institutions.

4. During the execution of the contract, in case of disputes and disputes, both parties to the contract may bring a lawsuit to the court or apply to the arbitration organ for arbitration (either).

5. This contract and its annexes are in duplicate, with each party holding one copy.

Supplier: _ _ _ _ _ _

Demand side unit: _ _ _ _ _ _

Purchase and sale contract version template 6

Party A (Buyer): _ _ _ _ _ _ _ _ _ ID number: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

Party B (Seller): _ _ _ _ _ _ _ _ _ _ _ ID number: _ _ _ _ _ _ _ _ _ _ Tel: _ _ _ _ _ _ _ _

By mutual agreement, the terms of the mud purchase and sale contract are as follows:

I. Material price

Name, specification, quantity and unit price (RMB) Note: Total amount: RMB 1,000,000.10. 2. Quality standard: the specifications of wood should meet the national standards. Party B will send the notice to Party A in batches, and Party A will check the quality with the certificate.

3. Delivery method, place and burden of freight and miscellaneous fees: Party A shall organize the means of transport to Party B to pick up the goods, and Party A shall bear the freight and embarkation fees, and Party B shall deliver the goods according to the contract and the certificate issued by the consignee of Party A..

4. When preparing raw materials, Party B shall prepare according to the written requirements of Party A, and the smooth surface of the materials shall be free of defects, cracks, explosions, unevenness and bright spots.

5. Party A shall notify Party B in writing of the name, specification and quantity of the required materials 20 days before delivery. If Party B fails to prepare the required materials according to Party A's requirements when Party A delivers the goods, the expenses of this trip shall be borne by Party B. ..

6. Party B pays the payment for one trip at Party A's place, pays the first trip according to the actual quantity of the first trip when picking up the goods for the second trip, and pays the second trip according to the actual quantity of the second trip when picking up the goods for the third trip to pay off the last trip.

Seven. Liability for breach of contract:

Party A's responsibilities:

1. If the goods are returned or rejected in violation of the contract, a penalty of _ _% of the total value of the returned (or rejected) goods shall be paid. If the goods are delivered late, Party B shall pay a penalty of _ _ _% of the total value of the delayed goods every day, and Party B shall bear the actual payment.

Custody fee

2. If the payment is overdue, a penalty of% of the total overdue payment shall be paid daily.

Party B's responsibilities:

1. If the goods cannot be delivered, a penalty of 5% of the total value of the undeliverable goods shall be paid; In case of late delivery, a penalty of% per day shall be paid according to the total amount of late payment.

3. If the quality and specifications of the delivered timber do not meet the requirements of the contract, it shall be handled at its own expense and compensate for the actual economic losses.

Eight. This contract is made in triplicate. It will take effect after being signed by the legal representative. The validity period is from _ _ _ _ to _ _ _ _.

Party A: _ _ _ _ _ _ _ _ _ _ _ _ Party B: _ _ _ _ _ _ _ _ _ _ _ _

_ _ _ _ _ _ _ _ _ _ _ _ _

Contract sample 2

Supplier: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

Demand side: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

In order to enhance the sense of responsibility of both the supplier and the demander, and ensure the normal production of the demander, this contract is specially signed through full consultation between both parties for mutual compliance and performance.

Tree species:

Finished product: 5% plywood

Three. Settlement price: RMB per tablet (including 17% VAT invoice).

4. Specification (mm), quantity (pieces) and delivery time.

Thickness, length, width and quantity Total delivery specification 52440 1220 Batch delivery time and quantity: month and day delivery total payment amount (RMB): product quality requirements and technical standards:

Plywood material: poplar core; Grade: excellent.

The humidity of plywood shall not exceed 12 degrees.

Plywood is not allowed to degum, crack, void and scar;

The thickness of the five-centimeter board is between 5.0 and 5.2 mm, and the thickness of the three core boards in the middle of ***7 layers is 1.4mm respectively. 30 pieces of Malacca dough, 30 pieces of the outermost two layers of basswood dough. The grain direction of basswood veneer is horizontal stripes, and the width of basswood veneer is between 100 mm and 250mm (about 250 mm basswood veneer is stuck on one side, and 100 mm to 200 mm basswood veneer).

There should be no split seam when splicing basswood dough, and the color of the spliced dough should be consistent.

The bearing capacity of plywood should meet our requirements.

Plywood shall not be bent or deformed.

8, plywood appearance allows a small color difference, small slipknot (φ 10mm below).

9. The surface of Wuli plywood should be free from degumming, glue leakage, wormholes, cracking, bursting and concave-convex of epidermis. Paper tape shall not be pasted, and both sides of plywood shall be polished.

10, glue: use environmentally friendly glue.

1 1. The splicing part of the middle poplar core board is staggered, but there can be no gaps and holes, and it should be tight.

Packaging standard:

Place of delivery: the location of the buyer's enterprise (in the factory area of Mingshijia Private Co., Ltd.)

Acceptance method: The buyer shall accept the products delivered by the supplier according to the quality requirements and standards in Article 5 above. If it is found that it does not meet the quality requirements and technical standards, it shall notify the supplier within 6 days after receiving the goods.

Payment date and settlement method: the payment shall be made within 20 days after the arrival of the goods, and the buyer shall calculate the payment according to the actual quantity that has passed the acceptance, and pay the payment by transfer after receiving the VAT invoice issued by the supplier. For unmatched products, if there is a matching order, settlement will be made, otherwise settlement will not be made, and the consequences will be borne by the supplier.

Liability for breach of contract:

If the supplier fails to deliver the goods, it shall pay the buyer a penalty of 30% of the total value of the undeliverable goods.

2. If the supplier delays the delivery (the grace period is two days), if it exceeds the grace period, it shall pay liquidated damages to the buyer at 1% of the non-delivery date.

3. If the quantity delivered by the supplier is insufficient and the buyer still needs it, the supplier shall pay according to the quantity and deliver the goods on time. Irretrievable

If it is handled, it shall be treated as undeliverable;

4. If the products delivered by the supplier do not meet the quality requirements and technical standards, the supplier shall be responsible for receiving them.

Return and exchange, if the goods cannot be delivered or the delivery time is delayed due to exchange, shall be treated as non-delivery or overdue delivery. If the supplier fails to replace or the replacement quantity is insufficient, it will be punished according to the insufficient delivery quantity;

5. The supplier is responsible for the fourth quality problem in the production process of the buyer (responsible for the return of plywood);

6. If the buyer refuses or returns the goods without reason, the buyer shall pay the seller a penalty of 15% of the total value of the rejected or returned goods. In addition; 70% of the finished products manufactured by the supplier shall be paid to the supplier as liquidated damages;

7. If the buyer delays payment (grace period is 6 days), the buyer shall pay the seller a penalty of 65,438+0% of the total payment.

X settlement of disputes: both parties shall try their best to settle disputes arising from the performance of this contract through consultation. If negotiation fails, either party may bring a lawsuit to the court where the contract is performed.

XI。 This contract shall come into force as of the date of signing. This contract is made in duplicate, one for each party.

Supplier: _ _ _ _ _ _ _ _ _ _ _ _ _ _ Demander: _ _ _ _ _ _ _ _ _ _ _

Legal representative: (signature) _ _ _ _ _ _ _ _ _ _ _ Legal representative: (signature) _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

Tel: _ _ _ _ _ _ _ _ _ Tel: _ _ _ _ _ _ _ _ _ _ _ _ _

_ _ _ _ _ _ _ _ _ _ _ _ _

Purchase and sale contract version template 7

Party A: _ _ _ _ _ _ Legal Representative: _ _ _ _ _ _ _

Party B: _ _ _ _ _ _ Legal representative: _ _ _ _ _ _ _

According to the provisions of the Contract Law of People's Republic of China (PRC), Party A and Party B, through full consultation, hereby enter into this Contract for mutual compliance.

Article 1 Product name, variety, specification and quality

1. Product name: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

2, product technical standards (including quality requirements), according to the following items (_ _ _):

(1) According to national standards;

(2) According to ministerial standards;

(3) According to enterprise standards;

(4) If there are special requirements, the technical conditions, samples or supplementary technical requirements agreed by both parties to the contract shall be implemented.

Article 2 Quantity, unit of measurement and method of measurement of products

1. Product quantity: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _.