Current location - Quotes Website - Personality signature - Paper format
Paper format
Standardization of Graduation Thesis (Design Instruction)

I. Working procedures

Second, the graduation thesis writing norms

Layout requirements of graduation thesis

1. All papers are printed with A4(2 10 mm×297 mm) standard white paper and bound (left-handed) into a book. When printing paper, it is required to leave enough blank edges around the paper for binding, copying and reader's comments. The upper edge and left edge (seam) of each side are 25 mm, and the lower edge and right edge (incision) are 20 mm, respectively.

2. The length of the paper is generally required to be no less than 12000 words, and the electronic document of the paper must be submitted for filing.

Paper binding order

According to the paper cover, original statement, abstract (Chinese), abstract (English), table of contents, introduction, text, conclusion and letter.

Xie, references and appendices are bound in order.

Font requirements and precautions for paper cover:

1. Thesis title: No.3 is in bold, and the title generally does not exceed 20 words. On the premise of accurately reflecting the most important content, the fewer words, the better.

2. Others: italics, numbers and characters in English Times New Roman III (handwritten).

3, the chairman of the defense committee, marking the teacher must personally sign and indicate the title;

4, "professional" column must fill in the professional full name, not allowed to write abbreviations;

5. Fill in the class number in the "class" column, and Chinese is not allowed, such as "civil class1";

6. Fill in the student number in the "student number" column, and Chinese is not allowed, such as "No.20, International Trade Class 3";

7. Fill in the name and title in the column of "Instructor". If there are two instructors, the teacher with high title should be written in front;

8. Fill in 3-5 "paper keywords".

Title font requirements:

First-class title: including original statement, abstract, table of contents, introduction, title of main body chapter, conclusion, thanks and references.

Documents and appendices: bold, small font size 2, bold, centered, 0.5 lines before the paragraph and 0.5 lines after the paragraph;

Secondary title: bold, small three, bold, 0.5 lines before the paragraph and 0.5 lines after the paragraph;

Third-level title: bold, No.4, bold, 0.5 lines before the paragraph and 0.5 lines after the paragraph;

Four-level titles: bold, small four, bold, with 0.5 lines before the paragraph and 0.5 lines after the paragraph;

Content font requirements:

1, original sentence, abstract (Chinese), text, introduction, text, conclusion and thank you font requirements:

Small four, the row spacing is set to 23 points;

2. Content font requirements and precautions:

① There are at most three titles in the directory;

(2) The first-level title in the catalogue is the name of Chapter 4 in bold; The second and third places are Song Ti and Xiao Si;

Reference requirements:

1, and the format of the reference is:

[Serial number] Author, translator, title, edition, place of publication, publishing house, date of publication: the starting and ending pages of the citation.

[Serial number] Author, translator, article title, journal name, year, volume number (number of issues): the starting and ending pages of the cited part.

[Serial number] Author, translator, article name, collection name, meeting place, meeting year, publishing place, publisher, publishing time: the number of pages cited.

2. Font requirements: No.5, Song Ti;

3. Number of references: at least 15, including at least 2 foreign documents;

4. References must be marked with "superscript", such as "[1]";

5. The references are listed in the form of [1], [2] and [3] according to the order in which they appear in the whole paper.

Chinese and English abstract requirements:

1, the abstract is a brief statement of the content of the paper, with no comments or annotations;

2. The contents of the abstract should include the purpose, methods and conclusions of the research work, with emphasis on the results and conclusions;

3. The abstract can only be written in the third person, and the requirements are concise and clear, generally requiring 200-300 words;

4, terminology specification, no formula and non-standard symbolic terms, no charts, tables and chemical structural formulas;

5. Papers should be accompanied by English topics and English abstracts to facilitate international communication. English topic selection and English abstract should be concise, and the content of English abstract should include the research purpose, methods, main results and conclusions. Generally speaking, there should be no more than 250 notional words.

6. Font requirements for English abstract content: small 4, font: Times New Roman;;

Format requirements of formulas and charts in the paper:

1, numbered by chapter, such as "(1. 1), (1.2) ..." is a formula, "1. 1" is a table, and "Figure" is a number.

2. The table name is in the top and the figure name is in the bottom;

3. The font of table name and drawing name is bold small four.

Precautions in the appendix

1, the appendix is placed after the reference, and the serial numbers of illustrations, tables, formulas, references, etc. Appendices are separated from the text and compiled separately, such as "Figure 1" and "Figure 2"; "Table 1" and "Table 3"; "Formula (1)", "Formula 2"; "literature [1]", "literature [2]" and so on;

2. The font requirements are consistent with the text requirements.

(A) the layout requirements of graduation thesis

1. All papers are printed with A4(2 10 mm×297 mm) standard white paper and bound (left-handed) into a book. When printing paper, it is required to leave enough blank edges around the paper for binding, copying and reader's comments. The upper edge and left edge (seam) of each side are 25 mm, and the lower edge and right edge (incision) are 20 mm, respectively.

2. Generally, the length of undergraduate graduation thesis is required to be about 10000 words (about 6000 words for art design description), and the electronic document of the thesis must be submitted for the record.

Paper binding order

According to the paper cover, original statement, abstract (Chinese), abstract (English), table of contents, introduction, text, conclusion and letter.

Xie, references and appendices are bound in order.

(III) Font requirements and precautions for paper cover

1. Thesis title: No.3 is in bold, and the title generally does not exceed 20 words. On the premise of accurately reflecting the most important content, the fewer words, the better.

2. Others: italics, numbers and characters in English Times New Roman III (handwritten).

3, the chairman of the defense committee, marking the teacher must personally sign and indicate the title;

4, "professional" column must fill in the professional full name, not allowed to write abbreviations;

5. Fill in the class number in the "class" column, and Chinese is not allowed, such as "civil class1";

6. Fill in the student number in the column of "student number", and Chinese is not allowed, such as "No.20, International Trade Class 3";

7. Fill in the name and title in the column of "Instructor". If there are two instructors, the teacher with high title should be written in front;

8. Fill in 3-5 "paper keywords".

(four) the font requirements of the title

1. First-level title: including original statement, abstract, table of contents, introduction, conclusion, thanks, references, appendix: bold, small two, bold, centered, 0.5 line before the paragraph and 0.5 line after the paragraph.

The chapter titles of the text are bold, small two, bold and left-aligned, with 0.5 lines before the paragraph and 0.5 lines after the paragraph.

2. Second-level title: bold, small three, bold, left-aligned, 0.5 lines before the paragraph and 0.5 lines after the paragraph;

3. Third-level title: bold, No.4, left-aligned, bold, 0.5 line before the paragraph and 0.5 line after the paragraph;

4. Four-level title: bold, small four, left-aligned, bold, with 0.5 lines before the paragraph and 0.5 lines after the paragraph;

(5) Content font requirements

1, original sentence, abstract (Chinese), text, introduction, text, conclusion and thank you font requirements:

Small four, the row spacing is set to 23 points;

2. Content font requirements and precautions:

(1) There are at most three titles in the directory;

(2) the title of the first-level chapter in the catalogue is bold No.4; The second and third places are Song Ti and Xiao Si;

(vi) Requirements for reference materials

1, and the format of the reference is:

[Serial number] Author, translator, title, edition, place of publication, publishing house, date of publication: the starting and ending pages of the citation.

[Serial number] Author, translator, article title, journal name, year, volume number (number of issues): the starting and ending pages of the cited part.

[Serial number] Author, translator, article name, collection name, meeting place, meeting year, publishing place, publisher, publishing time: the number of pages cited.

2. Font requirements: No.5, Song Ti.

3. Number of references: at least 15, including at least 2 foreign literatures.

4. References must be marked with "superscript" in the text, such as "[1]".

5. The references are listed in the form of [1], [2] and [3] according to the order in which they appear in the whole paper.

(7) Chinese and English abstract requirements

1, the abstract is a brief statement of the content of the paper, without comments or annotations.

2. The contents of the abstract should include the purpose, methods and conclusions of the research work, with emphasis on the results and conclusions.

3. The abstract can only be written in the third person, and it should be concise and clear, generally requiring 200-300 words.

4. Standard terminology, no formulas and nonstandard symbolic terms, no charts, tables and chemical structural formulas.

5. Papers should be accompanied by English topics and English abstracts to facilitate international communication. English topic selection and English abstract should be concise, and the content of English abstract should include the research purpose, methods, main results and conclusions. Generally speaking, there should be no more than 250 notional words.

6. Font requirements for English abstract content: small 4, font: Times New Roman.

(eight) the format requirements of formulas, figures and tables in the paper.

1, numbered by chapter, such as "(1. 1), (1.2) ..." is a formula, "1. 1" is a table, and "Figure" is a number.

2. The table name is on the table, and the figure name is under the figure.

3. The font of table name and drawing name is bold small four.

(9) Precautions in the Appendix

1, the appendix is placed after the reference, and the serial numbers of illustrations, tables, formulas, references, etc. Appendices are separated from the text and compiled separately, such as "Figure 1" and "Figure 2"; "Table 1" and "Table 3"; "Formula (1)", "Formula 2"; "literature [1]", "literature [2]" and so on;

2. The font requirements are consistent with the text requirements.