Firstly, the method of Japanese wallpaper paving is introduced.
Do a good job of grounding protection.
Generally, when Japanese wallpaper is laid, the floor tile or floor has been laid. It is suggested to lay a plastic film on the ground before laying Japanese wallpaper. The film can prevent the glue from falling directly to the floor, thus protecting the floor.
Measure the size again
Measure the wall size to obtain the required number of Japanese wallpaper. The width of Japanese wallpaper except the protective edge is the shortest effective distance of Japanese wallpaper, and the position from the top of the wall to the skirting line is the height of paving, which is also the shortest effective distance of each Japanese wallpaper.
Start Japanese wallpaper cutting
When cutting Japanese wallpaper, the single piece is longer than the actual wall, and the general distance is about 10 cm. The remaining part of Japanese wallpaper can be reserved for later repair. If a position (such as a beam) is added to a complete wall, this position is generally not paved, and the effect is better.
Japanese wallpaper is softened with glue.
Spread glue evenly on the back of Japanese wallpaper with a spatula, stick it well and attach protective tape, then fold the Japanese wallpaper in half and soften it for a period of time. In the process of gluing, lay orange protective tape, and ensure that there is no glue on the surface of Japanese-style wallpaper when it is folded in half.
Japanese wallpaper paving
When laying Japanese wallpaper, you can judge the horizontal and vertical direction of Japanese wallpaper with the help of instruments, and pay attention to the margin of the upper and lower edges. Japanese wallpaper should pay attention to timeliness when laying. If the glue starts to dry, don't lift the Japanese wallpaper to correct it.
Japanese wallpaper trimming and cleaning
Attention should be paid to the splicing of patterns in overlapping parts, and the overlapping parts of Japanese wallpaper should be cut off. On the wire switch panel, straighten it as straight as possible. Glue scraped from paper splicing and glue on the panel can be wiped with sponge.
Pavement completion confirmation
The owner shall check and accept the Japanese wallpaper paving, and properly keep the signed and confirmed relevant documents, especially the warranty. Because it involves future maintenance and warranty issues, it needs to be treated with caution.
Second, Japanese wallpaper purchase skills
Look: See if there are color differences, wrinkles and bubbles on the surface of the wallpaper, whether the pattern of the wallpaper is clear and whether the color is uniform.
Feel: After reading it, you can touch the wallpaper with your hand to feel its texture and whether the thickness of the paper is consistent.
Wen: This is very important. If the wallpaper has an odor, it is likely that the content of volatile substances such as formaldehyde and vinyl chloride is high.
Wipe: You can cut a wallpaper sample and wipe the paper with a wet cloth to see if it changes color.
What I recommend to you above is the analysis of various aspects in the process of purchasing Japanese wallpaper, as well as specific comparisons and suggestions. From this we can know the suitable Japanese wallpaper. First of all, we can see it from their color patterns and styles. Generally speaking, Japanese wallpaper is a color with low saturation, which is suitable for large solid wood furniture and related similar floor building materials products to achieve satisfactory results. In addition, unlike the low-key and luxurious French style and rich Chinese style, Japanese wallpaper can be used with tatami, and I believe the final practical effect will be satisfactory.