In daily study, work or life, everyone often comes into contact with letters. Letters are a special way for people to express their emotions. I believe that writing letters is a headache for many people. Below are 7 personal safety commitment letters that I have compiled for you. I hope it will be helpful to you. Personal Safety Commitment Part 1

1. Earnestly implement the safety production policy of safety first, prevention first, hands-on, comprehensive management, abide by various safety production systems and regulations, and do not harm yourself , do not harm others, do not be harmed by others.

2. Be loyal to your duties, strictly fulfill the safety production responsibilities of your position, and implement the one-post-one system.

3. Do not give orders in violation of regulations, do not operate in violation of regulations, do not violate labor disciplines, resist illegal instructions, and correct violations.

4. Strictly implement the operating license management regulations. When using fire, importing equipment, temporarily using electricity, working at high altitudes, and breaking ground, the operating license must be obtained in accordance with regulations and procedures. No operation without a license is allowed. .

5. Dress to work in accordance with regulations, wear labor protection equipment, do not bring fire into the production area, do not smoke in no-smoking places, and strictly abide by fire and explosion prevention, vehicle safety and other prohibitions.

6. Take the initiative to accept safety education, training and assessment, and be certified to work, be able to call the police, self-rescue and mutual rescue, and be proficient in the use of fire and gas protection facilities such as gas masks, respirators, and fire extinguishers.

7. Consciously accept the safety and technical operation requirements of the company, department, and team, consciously implement various safety, technical, and required safety measures, and do not take chances.

8. Take the initiative to stop unsafe behaviors of colleagues, and immediately report to the on-site production safety management personnel or relevant person-in-charge if any accident hazards or other unsafe factors are discovered.

Commitment person: xxx Personal Safety Commitment Letter 2

Project name:

Project location:

Operation content (scope):

Operation method:

Operation period: xx, month xx, 20xx to xx, month xx, 20xx

Party A’s project department:

This team is affiliated to the leadership of the construction team of Sichuan Province ×× Labor Service Co., Ltd. (hereinafter referred to as the company) with ×× as the person in charge. We accept the tasks assigned by the company, follow the progress plan and deployment arrangements of the construction team, and enter the site to perform the construction tasks of (project name:). The construction tasks of this team are: Project location:; Operation content (scope):; Operation method:; Operation duration: xx, month xx, 20xx to xx, month xx, 20xx.

Based on the above-mentioned agreement on the content, scope and method of the work, and under the leadership and requirements of the construction team, this team confirmed that it will be carried out in accordance with the main contract signed by our company and Party A (your company) and its attachments ——The content of the "Safe and Civilized Construction Agreement", comprehensive, complete and thorough performance of contract obligations and safety production responsibilities. To this end, we promise:

This team will strengthen the safety management of the construction site and ensure the safety of personnel. To ensure safety and health during the construction process and to prevent safety accidents, we must strictly perform the following safety production responsibilities during the construction process:

According to the "Work Safety Law of the People's Republic of China", we As the leader of the work team and the first person responsible for safety production, he is fully responsible for the safety production of his team. I pledge to: conscientiously implement national and enterprise regulations, norms, standards, procedures and various rules and regulations, actively implement the main responsibility for safety production, strive to do a good job in safety production of this team, reduce and eliminate production safety accidents, and solemnly promise: .

Specific methods are:

1. Timely and truthfully declare the list of construction workers to Party A’s project department, including their names, gender, age, address, ID number and physical health status . When there are personnel adjustments, report them immediately to the relevant personnel of the project department. It is strictly prohibited to employ persons without identity documents, persons without production operation qualification certificates, child laborers under 16 years old, and persons with serious diseases to enter the working area or living area of ??the construction site, and these personnel must also be prohibited from engaging in construction and production operations.

2. Electricians, on-site motor vehicle workers, aerial workers, tensioning machine operators, crimping workers, motorized grinding and grinding operators, welders, scaffolding workers and motor vehicle drivers must be required to maintain Special type of work operators must have a certificate to work, strictly abide by the operating procedures, and non-special operators are strictly prohibited from engaging in special operations.

After this team enters the site, it is necessary to promptly determine the range of employees who are eligible to wear "badge badges" and submit the list to Party A's project department for record. After Party A's project department accepts the filing, this team will, under the command of the construction team, cooperate with Party A's project department to organize on-site workers to explain major construction nodes, major construction plans, and safety production and construction organization plans before the start of construction, and clarify safety production responsibilities. The subjects and their division of labor, as well as the time, procedures, processes and key points for implementing safety production measures, shall be recorded in the construction operation log. On the log, all parties should sign to confirm the contents.

I guarantee that it is absolutely prohibited to instruct relevant personnel to operate in violation of regulations or blindly without guidance on major construction plans or guidance on safe production and construction organization plans, in violation of safety operating procedures and normal use regulations of safety facilities and equipment, or when there is no work ticket or the regulations on the work ticket are unclear. Or rough construction.

I also promise to strengthen management of temporary workers, handymen, general workers and other employed personnel. If there is a safety accident, I, the construction team and the company will bear joint and several liability.

3. Obey the management of construction team technical personnel and full-time (part-time) safety officers. Strictly obey the supervision and guidance of Party A’s project department and the company’s safety management personnel at all levels. The safety management personnel of Party A's project department have the right to, in accordance with production safety laws and regulations and various safety systems, impose financial penalties on team members who violate regulations and workers who violate regulations until they are cleared from the site.

4. Seriously abide by various safety production regulations and safety production management systems. After a safety accident occurs, immediately rescue the injured, eliminate danger, protect the site, and report to the construction team, company and Party A's project department in a timely manner.

5. Conscientiously implement various production safety technical disclosures, safety technical measures and special production safety plans. The safety technical disclosure requirements of Party A's project department and construction team must be strictly implemented, and according to the safety disclosure content of Party A's project department and construction team, I shall make a detailed written safety disclosure to the construction workers and fill in the construction work ticket. Ensure that the person making the disclosure clearly understands the content of the disclosure and ensure safe construction.

I promise that before executing each major construction node, major construction danger point and dangerous source construction task, I must strictly follow the detailed safety production construction plan drawn up by the construction team and approved by Party A’s project department. Organize plans and major construction plans, and organize the implementation of production operations. During the implementation process, relevant practical and timely measures will be taken to effectively control various hidden dangers and risks within the scope of this construction operation.

6. Ensure that all personnel in the team consciously maintain a safe production environment when working, and do not dismantle or modify safety protection facilities without asking for approval.

7. Carry out pre-shift safety activities and keep records. Conduct admission safety education and improve safety awareness. During the construction process, we conscientiously implemented the daily safety speech system before work, commented on the safety production situation, and improved self-protection awareness. And provide Party A’s project department with the safety education records of the team’s construction workers. Those who have not received safety education are not allowed to work.

8. Do not give orders in violation of regulations, do not operate in violation of regulations, and do not violate labor disciplines. I am the person directly responsible for safety production at the construction site. I guarantee that: in accordance with the requirements of the construction team and Party A’s project department, I will manage, supervise and require the following operators to conscientiously perform the main contract and the obligations and agreements related to safe and civilized production, and require and supervise them to comprehensively, conscientiously and thoroughly perform the main contract and Corresponding safety and civilized construction obligations.

During construction operations and daily activities, I will strictly require the personnel under my jurisdiction to abide by the various safety production systems formulated by the company and the specific work requirements of Party A’s project department, and prevent my subordinates from illegally commanding, Illegal operations and violations of labor disciplines.

If a safety accident occurs due to my poor safety management or chaotic management, the responsibility and losses shall be borne by me (including various safety production accidents caused by various personnel employed by my team). The construction team and the company will also bear unshirkable joint and several responsibilities.

9. Timely elimination of safety hazards discovered during operations is not a timely report within one's own scope.

10. Inform the team members truthfully about the dangers, hazard factors, preventive measures and accident emergency measures in the workplace and workplace, and actively participate in emergency drills organized by the project department.

11. Ensure that the team members wear and use labor safety protective equipment correctly.

12. Perform other safety production duties stipulated by laws, regulations and regulations.

13. This safety responsibility commitment letter is written by me in accordance with the requirements of the main contract signed by the company and Party A and its attachment - "Safe and Civilized Construction Agreement", under the leadership and arrangement of the construction team, The written commitment to implement the safety agreement issued to Party A's project department has been recognized by the company and the construction team.

The written commitment issued by the team leader to Party A’s project department shall be regarded as the necessary expression and necessity of the company and the construction team to implement the main contract and its attachment - "Safe and Civilized Construction Agreement" Supplement and further improve.

14. If a safety accident occurs due to violation of this commitment and failure to perform safety production management responsibilities, as the team leader, I will not only accept the obligations stipulated in the main contract and its attachment "Safe and Civilized Production Agreement" In addition to the fines and penalties, the company also voluntarily accepts the following penalties:

(1) In case of general accidents, a fine of no less than the total price of the main contract project shall be accepted.

(2) For major accidents, a fine of no less than the total project price of the main contract will be imposed.

(3) A fine of not less than the total project price of the main contract will be imposed for major accidents.

(4) In case of particularly serious accidents, a fine of no less than the project price of the main contract shall be imposed.

(5) Those who constitute a crime shall be subject to corresponding criminal penalties.

15. This commitment will take effect from the date of signature by the person in charge. It will be made in two copies. Party A’s project department and the person in charge of the construction team will each hold one copy, which has the same legal effect.

Signature of the promisee (signature, fingerprint)

Year, month, day, personal safety commitment letter 3

Department leader:

Me We solemnly promise to strictly and consciously perform the following responsibilities and obligations in the company's production safety work:

1. Comply with national laws and regulations at all levels and the company's rules and regulations. I strictly abide by the "Safety Production Law", "Hebei National laws, regulations, standards and company-related safety production rules and regulations such as the Provincial Production Safety Regulations and the Interim Provisions of Hebei Province on Implementing Safety Subject Responsibilities of Production and Operation Units.

2. Consciously accept various safety production education and training, and master the safety production knowledge required for your job

1. Master the safety production knowledge required for your job before taking up the job independently and safe operation skills, and master the knowledge of the use, maintenance and storage of safety equipment, facilities, tools, and labor protection supplies.

2. Before special operations, special safety operation training must be carried out in accordance with relevant national regulations. After obtaining the special operation qualification certificate, you can start working with the certificate.

3. Understand the risk factors, preventive measures, accident emergency measures and related self-rescue and mutual rescue knowledge in your workplace and work station, and enhance your accident prevention and emergency response capabilities.

3. Consciously perform the safety production responsibilities and obligations stipulated by the company and department systems

1. Strictly follow the job safety operating procedures and safe work instructions, and obey the leadership of the unit management to prevent violations.

2. Implement safety production rectification measures, actively adopt new technologies and new processes, improve labor and production conditions, and do not use materials that have not been inspected and accepted by the company’s “Three Simultaneities” or that have been eliminated, banned, scrapped or endangered by the state’s explicit orders. Produce safe processes and equipment to improve the safety of production equipment.

3. Responsible for the daily inspection and management of mechanical and electrical equipment at the production site of this position, timely discovery and elimination of potential safety hazards, and strict implementation of the use of flammable, explosive and hazardous chemicals within the scope of this position. Monitor key parts to ensure the safe use of equipment and facilities.

4. Care for each other, take care of each other, remind each other, and supervise each other at work, and do not harm yourself, others, or be harmed by others.

5. Concentrate on work, do not work while sick, do not work tired, and do not do dangerous actions unrelated to work.

6. When discovering potential accidents or other unsafe factors, immediately report to the production safety management personnel or the person in charge of the unit and take possible emergency measures.

7. Refuse illegal orders and forced risky operations; stop and correct other personnel's illegal behaviors; actively provide opinions and suggestions on the unit's safety production decision-making matters and daily safety production work.

8. Consciously perform other safety production responsibilities stipulated by the company and department systems.

IV. Actively participate in and cooperate with the handling of safety accidents

1. After a production safety accident occurs, personnel at the scene of the accident should immediately report it to the person in charge of the unit. Quickly take measures to carry out rescue operations, protect the accident scene, prevent the accident from expanding, and immediately and truthfully report to the department leaders and other relevant departments.

2. Do not conceal, do not lie, do not delay, do not intentionally damage the accident scene, and protect relevant evidence.

5. If I violate the above commitments and fail to consciously perform safety production responsibilities without causing any responsible accident, I promise to accept a fine of 500 yuan each time.

6. If I violate the above commitments and fail to consciously perform safety production responsibilities, resulting in a responsible accident, I promise not to hinder or interfere with the investigation and handling of production safety accidents in accordance with the law, and accept the following penalties:

p>

1. In the event of minor injury accidents that cannot be rated, equipment with direct economic losses of less than 200,000 yuan, or fire accidents: each person will be punished with a penalty of 3,000 yuan.

2. A tenth-level disability accident occurs: each person will be punished with a fine equivalent to the person’s income in the 7 months before the accident, but shall not be less than 15,000 yuan.

3. Equipment or fire accidents involving level 9 disability accidents or direct economic losses of 200,000 yuan to 1 million yuan: each person will be fined equivalent to the person’s income in the 9 months before the accident, but shall not Less than 20,000 yuan.

4. For each person who suffers an eighth-level disability accident, he will be punished with a fine equivalent to his income in the 12 months before the accident, but shall not be less than 30,000 yuan.

5. Each person who suffers a level seven disability accident will be punished with a fine equivalent to his or her income in the 15 months before the accident, but shall not be less than 40,000 yuan.

6. Each person who suffers a Level 6 disability accident will be punished with a fine equivalent to his or her income in the 18 months before the accident, but shall not be less than 50,000 yuan.

7. In the event of a fifth-level disability accident or an equipment or fire accident with a direct economic loss of more than 1 million yuan: each person will be punished with a fine equivalent to his or her income in the 20 months before the accident, but not less than 60,000 yuan.

8. In the event of a disability accident of level 4 or above: each person will be punished with a fine equivalent to his or her income in the 22 months before the accident, but shall not be less than 70,000 yuan.

9. Punishment for accident liability shall be implemented within one month and handed over to the relevant departments of the company. Commitment period: From the date of signing of this commitment letter to the next revision and re-signing.

Signature of the promisee:

20xx year month day personal safety commitment letter 4

In order to further implement the main responsibility of Zaoqiang County enterprises for safe production, prevent and reduce Various production accidents occur to ensure the stable production safety situation in Zaoqiang County. This unit solemnly promises the following:

1. Conscientiously implement the main responsibility for production safety. The main person in charge of the enterprise is the first person responsible for the enterprise's production safety and is fully responsible for the enterprise's production safety work. Establish, improve and strictly implement the safety production responsibility system, and strengthen the grassroots and basic work of enterprises.

2. Carry out safety inspections. Establish and improve the safety production inspection ledger, implement the rectification content, rectification measures, rectification time limit, rectification department, and rectification personnel for the identified safety hazards, and complete the rectification on time.

3. Continuously improve the safety quality of employees. Conduct regular safety education for enterprise employees, and establish "three-level education" files for enterprises, workshops, and teams; ensure that safety management personnel and special operations personnel are certified to work; and equip full-time safety management personnel in accordance with regulations.

4. Establish and improve emergency rescue plans. Develop targeted and practical accident emergency rescue plans, organize regular drills, and equip with necessary emergency equipment; deal with accidents decisively to prevent the situation from expanding and spreading, and report in a timely manner according to procedures.

5. Improve the basic management level of enterprise safety production. Actively promote safety standardization management, gradually establish a self-restraint, self-improvement, and continuously improved enterprise safety production working mechanism, and continuously improve the overall safety level of the enterprise.

6. Ensure that various production safety accidents do not occur in the enterprise. This unit will strictly abide by various national laws and regulations on production safety, and conscientiously carry out safety production work in all aspects of production, operation, use, storage, transportation, and disposal to ensure that various production safety accidents do not occur.

This commitment letter is subject to supervision by company employees and society. If there are any violations of laws and regulations, we will bear corresponding legal responsibilities.

Unit (stamped):

Main person in charge of the unit:

Person in charge of safety production in the unit:

Year, month, day Personal Safety Commitment Part 5

In order to conscientiously implement the work deployment of our "Special Rectification of Labor Safety" activities, further promote the stability of work safety in teams, carry out in-depth and effective investigation and rectification of hidden dangers in labor safety, and make every effort to Do a good job in safety work during the summer, keep a close eye on weak links in production safety, take decisive measures to correct and solve them immediately, comprehensively enhance the awareness of safety responsibilities, worries, and quality, and comprehensively improve the team's safety management capabilities, professional management capabilities, and on-site card control capabilities; improve employees' Team quality, ensure that reflection, inspection and rectification achieve solid results, ensure the comprehensive implementation of the "Special Rectification of Labor Safety" activities and the continued stability of team safety. As a team safety officer, I take full responsibility for all safety production work of the team, and voluntarily signed and solemnly promised to abide by the following commitments:

1. Seriously learn from the "5.10" accident and give my own blood Learn lessons, deeply understand the nature of this accident, continuously strengthen business learning at work, and enhance safety awareness. Keep in mind the requests made at the emergency meeting of the road bureau and sections. Take precautions before they happen and draw inferences from one example. Always use this major accident to remind yourself and be strict with yourself.

2. Conscientiously implement the safety production policy of "safety first, prevention first", take the lead in complying with various safety production systems and regulations, enhance self-preservation awareness, and achieve "I will not harm others" at work , I won’t be hurt by others, and I won’t hurt myself.” Don’t engage in things unrelated to work during working hours.

3. Strengthen business knowledge learning and improve response capabilities. Study the "Safety Regulations" and "Inspection Regulations" in depth. Focus on the "300 Section Stuck System" and be fully familiar with the responsibilities and tasks of this position; enable yourself to do standard work and establish a standard position. We will conscientiously implement safety education and training plans, establish and improve employee learning records, carry out targeted safety education work, and comprehensively enhance employees' job safety awareness.

4. Be loyal to your duties, strictly fulfill the safety production responsibilities of your position, and implement the "one post, one responsibility system". Strictly carry out operations in accordance with the requirements of standardized operating procedures. Before each operation, prepare a plan for the day's work. When operating, follow the standards and prepare various safety plans in advance to handle emergencies decisively. Eliminate possible safety hazards.

5. Do not give illegal instructions, do not work illegally, do not violate labor disciplines, resist illegal instructions, correct illegal behaviors, promptly stop unsafe behaviors of employees, and report to the supervisor immediately if any accident hazards or other unsafe factors are discovered. Report to the on-site production safety management personnel or team leader; and handle it in a timely manner. Ensure that every job, every operating procedure, and every operator can be performed safely.

6. Strictly implement the operating permit management regulations. When conducting on-site operations, operate according to regulations and procedures, and strictly follow the network flow chart to control operations. Formulate construction plans and safety precautions, implement effective protection for all aspects of the construction site, eliminate illegal command and illegal operations, and ensure that all aspects of the construction site meet safety requirements.

7. Dress for work as required, wear labor protection equipment, conduct safety inspections carefully before work, discover unsafe factors, handle and report them in a timely manner, and strictly abide by work-related regulations.

8. Take the initiative to accept safety education, training and assessment, and work with a certificate. Master fire protection knowledge, be able to call the police, be able to rescue yourself and each other, and be proficient in using fire extinguishers and other fire protection facilities.

9. Organize daily cleaning of the environment in offices, workplaces and living places, promptly remove flammable materials with hidden dangers or unsafe hazards, and strictly inspect various electrical appliances , and the use of kitchen utensils in the food group. 10. Make every effort to do a good job in flood prevention and summer safety work for the team. Keep abreast of flood control and strong wind and rainfall warnings, and timely communicate and arrange strong wind and rainfall warning work. The team's implementation of flood control emergency plans and the implementation of driving safety measures during flood season were inspected, and imperfections were further improved to ensure that flood control was foolproof.

11. Do a good job in preventing heatstroke in the summer, prepare heatstroke prevention medicines and drinking water in time before daily work, supervise the team meals, make rough dishes carefully, and strictly control food purchase and processing. Carry out supervision and control to ensure food hygiene, control from the source, and prevent the occurrence of food poisoning incidents. Provide timely supply of heatstroke prevention soups and heatstroke prevention drinks to provide employees with “cooling” and ensure their personal safety during summer work.

12. Strictly implement the maintenance process during operation, and supervise the completion of various records. When handing over the shift to the foreman, the safety production situation must be handed over, and good conditions for safe production must be created for the foreman.

13. Go to work without illness or emotion. If you feel unfit before going to work or doing work, inform the team leader and work leader in advance, and do not conceal or lie.

14. When you need to ask for leave when something happens, you can only go out after approval and return to the team within the specified time. Do not ask for leave without reason or embarrass the team leader.

15. When riding a rail car, ensure your own safety, strictly abide by the regulations that the upper and lower sides should face the vehicle, and no loud noise is allowed in the rail car.

16. When on vacation or studying abroad, in addition to implementing section and workshop-related regulations and safety management, and strictly abide by various laws, rules, systems, and regulations, do not ride motorcycles or ride " Vehicles with incomplete "Three Certificates" must ensure their own safety.

Seventeenth, give full play to the overall role of the party organization. Pay attention to mobilizing and giving full play to the overall role of the party organization, strictly abide by the organizational principle of democratic centralism, consciously maintain team unity, cherish collective honor, and exert collective strength. Manage the team well, lead the team well, lead a good style, and strive to create a good working environment that is united, upright and energetic. Adhere to the "five good" and "five leadership" standards to build a solid foundation for grassroots party building and better play the fighting fortress of grassroots party organizations and the vanguard and exemplary role of party members.

The above are the commitments I have made for special labor safety activities. I will strictly abide by and implement my commitments. I ask comrades to supervise me and take seriously everyone's education and criticism of me.

Pledger:

Year, month, day, personal safety commitment letter 6

In order to meet the safety management requirements of xx Qingmei Chemical Co., Ltd., I make the following commitments :

1. I have received safety education and training, and can conscientiously implement the safety policy of "safety first, prevention first, comprehensive management", abide by various safety management systems and regulations, and be able to do everything possible. Hurt yourself, don’t hurt others, don’t be hurt by others, protect others from being hurt.

2. Do not give orders in violation of regulations, do not operate in violation of regulations, do not violate labor disciplines, resist illegal management, and put an end to the "three violations".

3. Take the initiative to accept various safety education training and assessments, and work with a certificate.

4. Strictly implement safe operating procedures and construction operation safety management regulations.

5. Wear labor protection equipment and standard attire when working.

6. Do not bring fire into the production area, do not smoke in non-smoking areas, and strictly abide by fire and explosion prevention, smoking and fire bans, traffic safety and other systems.

7. Do not discharge waste water, waste gas, and waste residues randomly, and do not litter domestic garbage.

8. Be able to call the police, self-rescue, mutual rescue, and use fire extinguishers and other fire protection and gas prevention facilities. I have received factory safety training, fully understand the company's basic safety regulations, and promise to strictly abide by them and voluntarily accept penalties if I violate the regulations.

Unit (department) name: Promise person (signature):

Year, month and day personal safety commitment letter 7

In order to meet the requirements of Jinding Coal Machinery of Shanxi Coal Group In accordance with the safety management requirements of Mining Co., Ltd., I make the following commitments:

1. I have received safety education and training and can conscientiously implement the safety policy of "safety first, prevention first, comprehensive management", Comply with various safety management systems and regulations, be able to avoid harming yourself, not harming others, not being harmed by others, and protect others from being harmed.

2. Do not give orders in violation of regulations, do not operate in violation of regulations, do not violate labor disciplines, resist illegal management, and put an end to violations.

3. Take the initiative to accept various safety education training and assessments from the company, and work with a certificate.

4. Strictly implement safe operating procedures and construction operation safety management regulations.

5. Be sure to wear labor protection supplies and work clothes when leaving the workshop.

6. Mining services must obey the arrangements of the mine and abide by the safety regulations of the mine.

7. Do not bring fire into the production area, do not smoke in non-smoking areas, and strictly abide by fire and explosion prevention, smoking and fire bans, traffic safety and other systems.

8. Be able to call the police, self-rescue, mutual rescue, and use fire-fighting and gas-prevention facilities such as surface fire inflators.

I have received factory safety training, fully understand the company's basic safety regulations, and promise to strictly abide by them. If I violate the regulations, I will voluntarily accept the company's punishment.

Organization department name: