Method: There may be something wrong with the template, so you can try it first:
Close all open documents, paste the following address into IE address bar, and press enter to open the directory.
%appdata%\microsoft\templates
Then delete the Normal.dot template inside, and then run Word.
Case 2:
As long as you run word, a dialog box will appear. If you click "Don't send an error report", WORD failed to start last time. Starting word in safe mode will help you correct or find problems during the startup process, so that you can successfully start the application in the first time. However, in this mode, some functions will be disabled. Do you want to start word in safe mode? If you choose No, the loop will continue. If yes is selected, WORD will be opened, but it is blank, that is, the interface is gray, and you need to create a new document to use it. I tried many ways to solve it, but I couldn't find the file.
Methods: This situation is usually caused by abnormal damage of the normal template, and the repair methods are as follows:
1. Close all open Word documents;
2. Copy this command:
%appdata%\microsoft\templates
3. Start → Run → Paste the copied command above → OK.
4. In the open directory, find Normal.dot and delete it, and then run Word again.
Case 3:
"Microsoft Office Word has encountered a problem and needs to be closed. We apologize for the inconvenience caused ",and the repair or even reinstallation is invalid! Other office components are normal, and Word can't open them. When you want to delete the Normal.dot file, you find that this file does not exist in your computer!
Method: the normal.dot template is damaged. Normal.dot is an auto-save template. For example, when writing a word document, the computer shuts down abnormally. After restarting the computer, word will start the document saved before shutdown to minimize your loss. One more thing, word automatically saves it every 10 minute by default. We can go to "Tools/Options/Save" and change the automatic save interval to 1 minute, so as to minimize the document loss caused by abnormal shutdown. The damage of normal.dot may be caused by an abnormal shutdown, so the user is always prompted. Normal.dat can't be opened, which will invalidate the automatic saving of word. I won't say much about this. ...
Continue to fix the problem of word, click Start, and enter "winword /a" to start word. At this time, there will be no dialog box that can't be opened. Save the word document, and you will be prompted whether to replace normal.dot At this point, word will replace the damaged template with a new template, and select Yes. So that words can start normally. ...
Case 4: "Microsoft Office Word encounters a problem and needs to be closed. We apologize for the inconvenience caused. After I restored the system again, word worked well, and this problem appeared in a few days. I have also restored the system n times, and I have never been able to restore it! And there is no virus, I use Rising and 360 Guardian, and I have used all the solutions that appear at present, 1, reinstall office;; 2. Delete the word template normal.dot, and enter "winword /a" during the operation to not start Word; 3. Deleting and adding windows components will not work; 4. Modify the registry, delete all office information and reinstall.
Q: 1. Why does this problem always appear?
2. Does 2.offic2003 have this problem? If it were me, I wouldn't have to.
3. What caused this problem?
4. Is it caused by system update or adding patches?
Method: You and I have the same problem, but it is not good to reinstall word. It won't take long to restore the system.
Later, after changing the template, the problem was solved and the opening speed was faster than before.
Enter "winword /a" when operating. You didn't start word, didn't you enter a space before "/"? Anyway, I entered it, then click Save, and select document template in the file type item of the dialog box. See that the template is normal and the bolts are fastened. After exiting again, click the entry type item above, select the document template and save it. It's ok after quitting!
Case 5: How to remove the security mode in word? That is, when word is opened, a dialog box appears with two command prompts: "Send error message" and "Don't send". Then a gray screen appears with the words (Safe Mode) on the title bar. What should I do? Thank you for your help!
The method is as follows:
Close WORD first, then go to c: \ documents and settings \ your user name \ application data \ Microsoft \ templates, and delete the file Normal.dot (you can back it up first). Please run WORD again.
Note: The application data folder is hidden, so you should open it first to show the hidden files and folders.
Second, the solution:
Locate the Normal.dot file and delete it manually.
The path is: c: \ documents and settings \ administrator \ application data \ Microsoft \ templates.
Third, the best answer 1, delete all the files of TEMP under the user name you use, the backup files of OFFICE during installation, and empty the diary information of all systems ... that is, delete the Normat.dot template file. That is, delete the g: \ documents and settings \ user name \ application data \ Microsoft \ templates \ normal.dot file.
2. Delete Microsoft Input Method 3.0 (right-click Input Method icon-Settings-Settings).
3. Start at zero. Enter "winword /a" at runtime to start word. At this time, there will be no dialog box that can't be opened. Save the word document, and you will be prompted whether to replace normal.dot At this point, word will replace the damaged template with a new template. The choice is yes. If not, enter word as above, click Tools-General in turn, and remove the check before "Update automatic link when opening".
4. If you can't find it, in the safe mode of WORD, click File-New-Template on this computer, and there is a blank document in the pop-up box. Right-click it and look at the properties to find the address of this blank document, and then copy and paste this address into the address bar of my computer to find this file.
5. Simple solution: Run -WinWord/A- Tools-Options-File Location-User Template Storage Location-Change Directory at will-Save-OK.
6.word2003 can't work normally for a period of time. There will be a prompt when you open it. The program is wrong. Word can help you try to fix mistakes. And you will be prompted to send an error. The title of the prompt is signature error. PINTLGNT。 IME error, but other office programs are working normally. After repeated installation and repair, the fault has not been eliminated. I found the file PINTLGNT. IME is a file of Microsoft Pinyin Input Method 3.0. Before that, I remember that I had uninstalled this input method. I'm a little confused about this mistake. I searched the whole disk and found no trace of this file, which made me more confused. Through reanalysis, I found that if I want to delete this registration, I can run regsvr32 /u PINTLGNT.IME After I enter this command during the operation, I will be prompted to succeed. The problem of reopening word has been ruled out.
Case 6: How to remove 6:word security mode?
First, the normal.dot template may be corrupted. This is an auto-save template. For example, when writing a word document, the computer shuts down abnormally. After restarting the computer, word will start the document saved before shutdown, which will make you suffer heavy losses.
Reduce to a minimum. (By the way, word automatically saves every 10 minute by default. We can change the automatic save interval to 1 minute by going to Tools/Options/Save.
Clock, so that the file loss caused by abnormal shutdown is minimized. )
Solution:
1, delete all the files of TEMP under the user name you use, the backup files of OFFICE during installation, and empty the log information of all systems ... that is, delete.
Except for the Normat.dot template file. That is, delete g: \ documents and settings \ user name \ application data \ Microsoft \ templates \ normal.dot.
Documents;
2. Click Start, and enter "winword /a" to start word. At this time, there will be no dialog box that can't be opened. If you save the word document, you will be prompted "Yes".
No, replace normal.dot, and then word replaces the damaged one with a paid template. The choice is yes. So that words can start normally. ...
Second, it may contain OFFICE error information, and the registry cannot pay more intelligently.
Solution:
1. Enter the Add/Remove program and WINDOWS component in the control panel, select any one to cancel trenching, and enter the Add/Remove program after confirming the salary change.
WINDOWS components, resume trenching ... and then confirm.
Function: When you add or remove WINDOWS components, the system will automatically pay the contents of the registry, delete the error message and pay more.
(Of course, the doctor program of WINDOWS Optimizer can also delete illegal registry information, but it is not as good as the system itself. )
2. After all the above operations are confirmed, you can pay a lot of money to install OFFICE.
Third, what, can't you do it? I have another trick here, which is a super simple L solution:-x7m2s; P2` 9m5 \%+i3x. When operating, enter "winword /a" to start word. We open "Tools/Options/General" and find the option "Link to update automatic mode when opening". See the check mark in the previous selection box? Take it off. Save and exit. Try to restart, everything is fine, OK! !
Case 7:
Word2003 starts the solution that prompts "safe mode" to open, and reinstalling office2003 is also an invalid solution:
Method: close WORD first, and then go to c: \ documents and settings \ current user name \ application data \ Microsoft \ templates.
(for example: c: \ documents and settings \ administrator \ application data \ Microsoft \ templates), delete the two files, Normal.dot and ~ $ normal.dot
Please run WORD again. Note: The application data folder is hidden, so you should open it first to show the hidden files and folders.
Reason: The template of word2003 is damaged, which makes word unable to start normally.
Attached:
Add a quick way to open the Templates folder on the right-click menu of my computer (for example, the menu "Unlock word Safe Mode").
Right click the desktop to create a new text document. Txt and copy the following. Rename it to. Reg removes word safety mode and double-clicks Run. All right!
Windows registry editor version 5.00
[HKEY _ class _ root \ clsid \ {204fe0-3aea-1069-a2d8-08002b30309d} \ shell \ Publish word security mode]
@ = "Disable word security mode" "Disable display policy" = dword: 4000003c.
[HKEY _ class _ root \ clsid \ {204fe0-3aea-1069-a2d8-08002b30309d} \ shell \ releasedword security mode \ command] @ = hex (2): 25): 25,000,53. 00,6f,00,6f,00,74,00,25,00,5c,00,45,00,78,00,70,00,6c,00,6f,00,72,00,65,00,72,00,2e
[HKEY _ local _ machine \ software \ classes \ CLSID \ {20D04FE0-3AEA-1069-A2D8-08002B30309D} \ shell \ Unlock word security mode] @ = "Unlock word security mode" "Forbidden policy" =
[HKEY _ local _ machine \ software \ class \ clsid \ {204fe0-3aea-1069-a2d8-08002b30309d} \ shell \ releaseword security mode \command]
@=hex(2):25,00,53,00,79,00,73,00,74,00,65,00,6d,00,52,00,6f,00,74,00,25,00,5c,00,45,00,78,00,70,00,6c,00,6f,00,72,00,65,00,72,00