RAMOS memory runs complete XP, GRUB starts one-click restore, and the hard disk stops running:
1, it is very important to prepare the necessary documents in the necessary form.
2.PM or PQ adjusts the size of the first partition, leaving a space of about 5G.
3. Spare the original system in the reserved space, install GRUB, and back up the operating system of the first partition with ghost.
4. Install the depth 2-in-1 installation version of V6.2, delete the first partition: create the first partition 2g(FAT format, ensure that it is less than 700M after installation).
5. Install the necessary drivers. If there are hidden grldr and menu.lst in the root directory of drive C, they must be deleted.
6. Install Fira disk (FIRADISK. INF-install-restart-select the directory where FIRA disk.inf is located-restart).
7.RAMTOOLS creates a hard disk image, which is 350M larger than the used space of the system disk.
7. 1 format image file FAT32 format, "compression" is absolutely not allowed.
7.2 copy RAMTOOLS, VICTORIA4.2 compressed package to the desktop, load and back up disk c to the mirror.
7.3 restart, select from RAMOS, load, spare disk C to mirror.
7.4 If there is a restart prompt or the installation software is repeated, load and copy the C disk to the mirror.
7.5 After entering ramos, files added under the root directory of drive C cannot be backed up, and only backups can be increased, but not reduced.
7.6 The startup item for installing backup is RAMOS, and the normal startup is RAMXP.
7.7menun.lst partition hiding and unhidding items are adjusted according to the actual situation of hard disk partition.
7.8 If you don't need to hibernate the hard disk, you can delete menul.lst directly.
8. After the production is completed, you can enter WINPE or MAXDOS to delete the first partition and the spare partition, and then merge them into the same partition.
8. 1 Make sure that the first partition is set as the active partition.
8.2 Use GHOST to restore the backup system to the first partition.
9. After starting RAMOS, you can use VICTORIA4.2 (you can't decompress, you can only compress the package to run) to stop the hard disk rotation.
9. 1 When starting RAMOS, all partitions of the hard disk must hide GRUB, otherwise the hard disk will wake up automatically after sleep. If you want to run on a USB flash drive, you must ensure that the USB flash drive is a system disk booted by GRUB in FAT32 format.
10. 1 copy RAMOS.img and grldt (there are only these two files on the USB flash drive, and you can also type MENU. LST)。
Whether 10.2 can run depends on the reading speed of the U disk and the USB interface of the motherboard.
1 1. If you find the above steps troublesome, you can follow the instructions of ramtools. However, the secondary ramos must rely on files such as NTLDR\BOOT. INI to start or even run drive C.