How to reinstall the system

Method 1:

First, make sure your optical drive is the first boot sequence and supports booting from the optical drive.

To install from a CD, you need to set the BIOS so that the system can boot from the CD. The method is as follows:

(1) Start the computer. When the Press Del to Enter BIOS Setup prompt message is displayed on the screen, press the Del

key on the keyboard to enter the motherboard BIOS. Setting interface.

(2) Select the Advanced BIOS Features option and press Enter to enter the setup program. Select the First Boot Device option, and then press the Page Up or Page Down key on the keyboard to set the item to CD-ROM, so that the system can be changed to a CD-ROM boot.

(3) Return to the main menu and save the BIOS settings. (The saving method is: press F10, and then press the Y key)

(4) Then put the CD into the optical drive and restart the computer. The system will boot from the CD and display the installation wizard. Interface, you can

follow the prompts step by step to install and set up.

After copying files to the hard disk in Windows XP, before restarting the computer for the first time, the CD must be removed from the CD-ROM drive, otherwise the system will still

start from the CD and execute in a loop Installer.

Method 2:

Then, press any key to enter the optical drive boot mode and load the Mini version of the operating system.

Then, press Enter to continue the installation.

Then, press F8 to accept the license agreement.

Then, select the location you want to install, select a space large enough, and press Enter.

Then, select the file system, NTFS is recommended, and press Enter.

Then a scandisk will be entered and the installation program will be copied to the hard drive.

The computer will then restart after 15 seconds, press Enter to restart immediately.

Then, boot from the hard disk to continue the installation process. At this time, the graphical interface mode begins.

After completing a series of hardware tests, you will enter the region selection prompt, where you can configure the language, keyboard, and region.

You will then be prompted for your username and organization name, and a computer name will be generated that you can change.

You will then be prompted to enter the product registration code.

You will then be prompted for your administrator password.

Then, the component selection box will be displayed, select the Windows components you want to install.

Then, you will enter the time zone and time settings.

Then, enter the networking component installation (if your computer has a network card and it is correctly recognized during hardware detection).

After configuring the network, the computer will detect and install a series of Windows components and services.

Then, reboot and run the newly installed Windows.

Then, enter the final stage of the installation and monitor plug-and-play hardware that was not detected previously.

Finally, it’s ready to use!

Method 3:

Install the system (the following takes the installation of WINDOWS XP as an example)

I chose a complete Windows XP installation CD without any cracks . Start the computer and press Enter when the words "press any key to start the CD" appear.

Start copying the installation program and check the capacity and format of the system disk location. You can ignore these; if a problem with the system hard disk appears, < /p>

The best choice for file format is AT32, don’t choose NTFS. Although the NTFS file system has greatly improved the stability and speed of the operating system and the hard disk management function, NTFS only supports Windows NT, Windows 2000, and Windows XP with NT as the core, and does not support DOS.

, WindowsME, Windows98. Therefore, it is not suitable for those of us who often play software. Once the system crashes, under NTFS it may be necessary to reinstall the system through repartitioning, formatting, etc. As long as the system is repartitioned, the information and data on the hard disk will be completely destroyed

. (This is a lesson I learned from countless losses. When I was using Windows 2000, I adopted the NTFS system, mainly to prevent the CIH virus from causing super damage to the system and hardware. But now, Killing CIH is too easy) On the contrary, under the FAT32 file system, as long as you have a 98 or Me boot disk and format the C drive, you can reinstall the system without fear of losing all the data on the hard disk. and information.

(About partitioning,

I won’t talk about it here. I will talk about partitioning specifically in the future, including practical training of FDISK and DM. Partitioning is a relatively dangerous and troublesome thing.

Situation)

Next, copy the system files and prepare for installation and other steps. A dialog box for selecting time zone, language, etc. appears, which I don’t need to explain. Be patient

.

If you are installing XP originally under DOS, you must first copy the smartdrv.exe file (named

smartdrv.exe in the Win98 installation directory) into the 98 boot floppy disk , running it before installation can greatly improve the installation speed. (I sometimes

run it before installation, and sometimes forget it, but I don’t feel much of a difference. Maybe my computer has a larger memory? I can’t tell)

< p>If you are reinstalling XP with the original system unchanged and xx operating system on the system hard disk, the "Upgrade/New Installation" dialog box will appear during the installation process. You must choose to upgrade at this time, unless you want to install a dual operating system on your machine.

When asked to enter the serial number, enter the following number:

BX6HT-MDJKW-H2J4X-BX67W-TVVFG

This registration code can basically be installed (I at least tried 5 or 6 kinds of XP installation CDs have been installed). Generally, the installation time does not exceed 60 minutes.

After the installation is complete, choose not to activate now or activate later, click Next, fill in at least one name, such as JixXP, and press Enter all the way.

It’s ready.

Now start activating the system: I used the activation method of Russian hackers. See the instructions below:

Method: Copy SETUPREG.HIV to the %systemroot%system32 directory

Overwrite the original file (I couldn’t find this SETUPREG.HIV, so I pasted it directly ),

Restart,

Press F8 to enter safe mode, log in as administrator,

Run WINXP_CRK.EXE, restart, enter WinXP, and when required When activating, select "Telephone Activation" and fill in each box with "401111" - activation successful!

Western Electronics/, remember to download the authorization KEY when downloading. You can use it for free for one month. In my opinion, it

is the best anti-virus software available for free download. . The most important thing is that this can ensure that your system will not be infected by viruses after reinstalling the system.

Step 7: Use kaspersky to scan for viruses, use the highest level, scan for about 20 minutes, if it is confirmed that there is no virus, then congratulations, your

love machine has regained a new life .

The eighth step is to apply the SP2 patch immediately. Be careful to download it from Microsoft's website and not from other places.

The ninth step is to download the trial version of Skynet Firewall immediately.

The tenth step is to find a genuine anti-virus software that can be used permanently. KASPERSKY itself is indeed good and has a good reputation. Unfortunately, the price is too expensive, costing 450 yuan. , it can be used as a temporary emergency, and it doesn’t matter if you don’t care about money. I once had a computer infected with a virus. I used Ruixing and Jiangmin, both of which were genuine

latest versions, and the virus was not detected. I found it with Kaspersky. Generally speaking, Ruixing and Jiangmin 2005 are enough, you can consider it yourself

.

Attention. In the above 10-step process, any piracy is basically eliminated (I dare not say about your operating system), so the new

system should be pure. Before completing the above 10 steps, please do not browse other unrelated websites, or download or install other programs locally.

Finally, I believe that 99.9% of viruses will be 100% defeated on your machine after so much trouble.

The truly perfect SP2 activation method

---As of now, the only feasible activation method for the SP2 upgrade version of WindowsXP Professional

This is since August 2004 Since the official Simplified Chinese version of SP2 of Windows Professional and Service Pack2 official Simplified Chinese official version

Then install windowsXP Professional and Service Pack2 official Simplified Chinese official version

Finally activate windowsXP Professional Service Pack2

Specific steps :

In the first step, please prepare three essential tools:

NO.1, 4-in-1 calculator

Very efficient and accurate Microsoft sequence The serial number calculation program is fast and almost all the serial numbers calculated are legal.

This calculator can "compute" four versions of the Windows series: Windows XP Professional, Windows XP

Professional.VLK is the Shanghai Government Edition, Windows Server 2003 VLK, Office XP . (Note: When calculating numbers, it is best to fill in other numbers in the

Random Seed column as random seeds for calculating numbers.)

(You can go to the Microsoft website to test the legality , method: My computer---in the help menu---select "Is this Windows legal?" or

pass the test URL:/resources/howtotell/ww/windows/default.mspx click< /p>

Validate Now button, and then follow the prompts to download the ActiveX control. If the Thank You! screen appears, it means you have passed the test, then congratulations, the WindowsXp SP2 you are using is genuine. !)

NO.2, XP directory changer Keyfinder1.41

This software is used to view and change CDKEY, mainly to change some activation servers that have been activated by Microsoft The terminal mark is "illegal" installation sequence

No.:)

NO.3. Online activation program 1.0

Currently, the activation method of SP2 must be activated online. , this program is an effective online activation method developed in the SP1 era. Although in the SP2 era, there will be an error message during activation, it is still the only effective method to ensure smooth activation through Microsoft. Server detection.

Preparing these three tools is currently the only necessary way to activate Xp SP2.

The second step is to install WindowsXP Professional and SP2:

NO.1. Install WindowsXP Professional. Note that the installation serial number must be calculated with a 4-in-1 calculator. You can do this during installation. Make a note of the calculation beforehand,

In case of unexpected events, it is best to fill in the Random Seed and click Generate to generate.

(The reason why we do not recommend the serial numbers provided in the vast number of pirated CDs and downloaded installation packages is because many people are using them, and the user market for the same

serial number is too large. It is large, so it is easy to be banned by Microsoft:)

(The reason why you fill in the Random Seed and click Generate is to prevent the majority of lazy D version users from using 0 for seed generation. And

results in using the same serial number, so there is a conflict:)

NO.2. Install the official simplified Chinese version of SP2. Note that you do not need to activate Windows XP before installing SP2.

The third step is to activate the SP2 version of Windows Run the online activation program 1.0 (key step!!!)

(1) Click the slightly stingy window with the mouse:)

(2) Wait:)

(3) When the activation window appears, please select "Activate via Internet"

(4) You can choose not to register (you can also register, name, password, email verification code..., very troublesome:)

(5) Fill in the serial number used in the previous installation step

(6) Click Retry

(7) An error message appears (this step must be Ignore it, it's normal)

(8) Restart the computer

(9) Do not run Activate Windows directly in the start menu

(10) Again Run online activation 1.0

(11) There are two situations at this time: A. It prompts that Windows has been activated! (You can jump directly to step 21:)

B. There is no success prompt and the previous interface is still repeated, so don’t worry, you are only one round away:)

(11) Still select "Activate via Internet"

(12) Do not register

(13) Pay attention here! ! ! Do not "fill in the serial number during installation" or click "Retry", but click "Phone"

(14) Select "Change ID"

(15) Use the 4in1 Calculator to calculate a new serial number

(16) Fill in the newly calculated serial number

(17) Click "Update" (18) and an error message will appear. Still ignore it

(19) Restart the computer

(20) Run online activation 1.0 again

(21) You should be prompted to activate in the second step Success!

At this point, WindowsXP Professional SP2 has been successfully activated. (If still unsuccessful, please always repeat the above steps 8~20 until you lose patience:)

*** Suggestive Tips: Finally, at this time after activation , on the premise of backing up important personal data and files in the partition where XP is located, change the system date

(at least postpone it for 31 days, one month in the future, what is activation if it does not take a month? ;) Then restart and see if you can log in successfully without the

activation prompt.

If you log in normally, your XP SP2 has indeed been fully activated!