Sample Letter of Commitment for Construction According to Drawings

Letter of Commitment for Construction According to Drawings Part 1: Commitment Letter for Construction Safety

Letter of Commitment for Construction Safety

The author contracts the air-conditioning repair project of Zhanjiang Tongshi Enterprise Co., Ltd. (hereinafter referred to as Party A). In order to ensure work safety, he is willing to abide by Party A's following operating safety regulations and assumes full responsibility. He hereby signs This commitment letter.

1. Rights and Responsibilities:

1. The author promises to purchase personal accident insurance for the construction workers and bear full liability for occupational disaster compensation for the work-related accidental injuries and deaths of the personnel he employs.

2. The author promises to implement various work safety regulations and comply with automatic inspections. If negligence causes casualties or any other disasters, he is willing to bear all responsibilities on his own and has nothing to do with Party A. If any losses are caused to Party A, we are willing to bear the responsibility for compensation. And if a safety accident occurs, we are willing to accept a fine of 2,000-5,000 yuan from Party A.

3. The author promises that if an accident occurs to a construction worker, the author will send personnel to the hospital for treatment. If the injured person is unescorted, Party A must assist in handling it, and the relevant expenses will still be borne by the Party A. The person who wrote the document is responsible.

4. The author of the letter

Commitment to full-time or designated safety management personnel to cooperate with the following matters:

4.1 Before officially entering the factory for construction, follow the project safety meeting For related matters, safety training and promotion are required for construction personnel;

4.2 Before daily construction during the project: hold a morning meeting for construction personnel to promote the construction safety regulations for that day;

4.3 During daily construction: the construction area should be inspected frequently and timely cooperation should be made to improve the problems raised by Party A;

5. The author promises to abide by Party A's "Outsourcing Construction Safety Management Regulations" and " "Factory Management Regulations", "Construction Safety Commitment Letter" and other related safety matters; if Party A fails to comply with the hidden safety hazards detected by Party A, Party A has the right to order improvements and impose a penalty of more than 1,000 yuan (inclusive). The fine shall be The company where the author works is responsible.

6. The author promises to set up reasonable construction safety passages at the construction site, hang safety construction signs and safety construction propaganda slogans. There are obvious warning signs in the construction area and protective isolation measures are set up. Add railings and covers to the edges and pit entrances of dangerous parts, and add safety warning lights when necessary. The protective equipment used by construction workers is effective, complete, and worn in accordance with regulations.

7. The author promises to remove the garbage caused by the construction in a timely manner to ensure that the site is clean and tidy.

2. Safety management personnel qualifications and certificate management

1. Projects submitted for construction shall have full-time safety management personnel holding safety qualification certificates recognized by the market.

2. For projects that are not reported for construction (sporadic maintenance projects, etc.), safety management personnel are designated.

3. Special operation personnel (such as welding, cutting, electrical work, etc.) must hold true and

valid special operation information certificates issued by safety supervision, quality supervision and other departments.

3. Management of construction personnel:

1. Construction personnel shall wear certificates according to Party A’s regulations for entering the factory.

2. Construction workers must be adults (over 18 years old), in good health, climbers, and have no fear of heights.

3. Construction workers must abide by Party A’s basic regulations in the factory, such as not wearing slippers, walking on the sidewalk, smoking in the factory, working under the influence of alcohol, littering, and Quarantine spitting, etc.

4. Any personnel of the construction manufacturer are prohibited from bringing cigarettes or lighters into the construction site. Before entering the factory, cigarettes and lighters must be stored in the cigarette storage area in the guard room in accordance with Party A's regulations. Smoking must be done in designated places. Smoking is not allowed inside the factory.

If this happens, the person's company will be punished immediately, with a penalty amount of 1,000 yuan (inclusive) or more per person found; if a smoker is found on site, the person's company will be punished immediately, with a penalty amount of 1,000 yuan (inclusive) or more per person, and The person is prohibited from entering the construction site; if cigarette butts are found on site, the manufacturer will be punished immediately with a penalty of more than 1,000 yuan (inclusive) per cigarette butt. If multiple manufacturers are constructing in the factory and no one acknowledges it, all manufacturers will be punished. .

5. Construction workers must wear safety helmets correctly when entering the construction area; when entering the production area, they must wear clothing and hats in accordance with regulations.

6. The author of the contract shall appoint on-site supervisors or supervisors who shall be responsible for managing all the staff of the project and complying with Party A’s various factory regulations. Party A has the right to expel those who do not comply with the regulations from the factory or call the police. .

7. Construction workers can only engage in relevant construction work within the construction area. They are not allowed to stay or move around in Party A’s non-construction areas. They are not allowed to take any products of Party A without permission. Once discovered, they will be expelled from the factory area. , and are not allowed to enter the factory for construction again.

1. The newly built factory area and factory building will be surrounded by 2-meter-high color steel plate or brick wall temporary fences, which are fully enclosed, and scaffolding on the outer walls will be hung for fully enclosed safety.

The entire network will be temporarily constructed with fences separated from the factory buildings. More than 5 meters; and set up warning signs.

2. Fire-proof materials should be used around the renovation and maintenance construction areas in factories/warehouses and other buildings to separate them from non-construction areas. The enclosure height should be determined according to the requirements of the construction environment. Fire-proof materials such as color steel plates, canvas, and bricks Wall and other materials; and set up warning signs.

3. Lifting and hoisting operations: Hoisting personnel should wear safety helmets and be surrounded by warning railings or warning tapes. The warning tapes are set at the rotation radius of the boom arm. The radius of rotation of the boom boom is It is strictly prohibited to stand or pass people within the scope; when hoisting, there should be a dedicated person responsible for unified command. The commander should be located where the operator can see clearly and can clearly see the entire hoisting process; warning signs should be set up.

4. Foundation pit construction must carry out edge protection: 1.2M high railing type protection shall be used for the edge with a depth not exceeding 2M, and foundation pit construction with a depth exceeding 2M must also be carried out. Use a dense-mesh safety net for closed protection; the distance between the edge protection railings and the edge of the foundation pit shall not be less than 50cm.

5. Safety protection for the four entrances:

(1) 1.2-meter-high protective railings at the entrance of the stairs;

(2) 1.2-meter-high protective railings around the entrance of the elevator shaft High-security protective railings and horizontal safety protection nets;

(3) Set up 1.2-meter-high protective railings at the reserved openings and set up covers or horizontal safety nets;

Side mining The first layer is surrounded by bamboo sheets, and the second layer is made of multi-layer wooden boards with warning signs. A safety notice sign is hung above the protective shed, as shown in the attached picture below. ? (4) A safe passage is provided at the entrance, the ceiling is equipped with two protective layers, the bottom is covered with bamboo sheets, and the top layer is covered with 50mm thick pine boards;

5. Fire protection and explosion-proof:

1 .Before starting any fire work in the construction area, a fire application must be obtained in accordance with regulations. After approval, the fire operator can sign and confirm on the fire application form before starting a fire. Anyone who carries out construction work without applying for fire work or without approval of fire work application will be immediately punished by the company to which the person belongs, with a penalty amount of more than 1,000 yuan (inclusive) per time. During fire work, the safety management personnel of the construction party must monitor the fire at the fire site until the fire is over.

2. Fire operations are carried out within the prescribed area; the construction site is equipped with fire extinguishers and other related fire-fighting equipment, and the fire extinguishers must be in complete and effective use condition; take measures to prevent combustion and explosions in solvent, dust, and raw material workplaces.

3. Gas welding equipment, rubber hoses, air valves, pressure gauges, and cutters are in good condition and have no air leakage.

4. Relevant protective equipment (such as protective glasses, etc.) must be worn during operation. If construction is unsafe without protective equipment, once discovered, the company to which the person belongs will be punished immediately

, the penalty amount is more than 1,000 yuan (inclusive) per time.

6. Prevent falling:

1. If objects may fall and scatter during operation, appropriate safety helmets and other protective gear should be provided. When the operating height is more than two meters, guardrails or Protective measures include wearing safety helmets and safety belts. If Party A discovers that construction workers are not wearing safety helmets or safety belts, they are willing to accept a fine from Party A: the first time they are found, the fine will be more than 1,000 yuan (inclusive) per person, and the second time they are found, the construction permit will be confiscated and the person will not be allowed to enter the factory. construction.

2. Set up fences or ropes in dangerous areas around the civil construction project site to prohibit entry and exit of non-related personnel, and set up warning signs. If the installation is not in place according to the specifications, a fine of more than 1,000 yuan (inclusive) per time will be imposed, and construction can only be carried out after improvements are in place.

3. Avoid dropping tools or loose materials at high places.

4. The construction racks and scaffolding of civil engineering construction shall be carried out in accordance with the standards for building safe and sanitary facilities.

5. Preparations must be made for high-altitude protective operations, and construction workers must wear protective gear correctly (such as seat belts, safety helmets, etc.); personnel who climb high must use complete climbing tools (such as herringbone ladders, etc.) , and there are people watching below. Avoid walking on climbing objects without handrails at high altitudes; do not walk directly on lighting strips. Failure to comply with the regulations will result in a fine of more than 1,000 yuan (inclusive) per time.

7. Measures to be taken to prevent falls when handling:

1. When handling corrosive or thorny environments, prepare gloves, safety shoes, safety helmets or masks for work. personnel use.

2. Appropriate tools should be used when handling, and the steel ropes and slings should not be overloaded. Except for personnel who need to wear safety helmets, personnel are strictly prohibited from entering under the lifting objects or cranes.

3. When handling large and bulky objects, designate an experienced person to take charge.

8. Safe use of electricity is required at the construction site.

1. When using temporary power supply for work, construction can only be carried out with Party A’s permission in advance. Do not connect the power supply without permission.

2. All temporary electricity use at the construction site is the responsibility of professional electricians (certified), and other personnel are prohibited from connecting to the power supply.

3. The construction site is equipped with qualified and safe special power distribution cabinets.

4. For temporary use of electricity, an air switch should be installed for protection, and professional electricians should inspect and maintain it. Do not use fancy wires or copper core wires to connect indiscriminately.

5. All plugs should be kept intact, electrical switches should not be used for multiple purposes, and power cords without plugs should not be used to connect electricity directly.

6. Construction machinery, electrical equipment and metal platforms used for construction must be reliably grounded.

7. When overhauling electrical circuits, hang a "No Power Supply" warning sign on the power switch.

8. When carrying or using iron parts, be careful not to touch electrical equipment.

9. During on-site spot welding operations, the grounding wire of the welding machine should not be arbitrarily connected to the electrical pipeline.

10. Do not touch or open or close high-voltage switches and equipment without the consent of Party A’s electrical supervisor.

11. Once the matters listed above are discovered, the construction unit will be punished immediately, with a fine of more than 1,000 yuan (inclusive) per time.

9. Accident and Disaster Management:

When an accident or disaster occurs during construction, in addition to on-site emergency treatment, the project supervisor or on-site supervisor of Party A shall be immediately reported for assistance. Take effective measures.

10. Hygiene of the construction site

The sanitation of the construction site should be ensured to be clean and tidy, the equipment and materials at the construction site should be maintained and shielded, and the sanitation of the construction site should be cleaned up in a timely manner. If the on-site sanitation does not meet the requirements of Party A, we are willing to accept it. A fine of more than 1,000 yuan (inclusive) per time will be imposed, and improvements will be made immediately. 11. Other safety matters:

1. When working in a limited space, wear protective equipment and have dedicated personnel to take care of you.

2. Designate full-time personnel to direct large and medium-sized construction machinery (hoisting, transportation, rolling, etc.). Cranes, scaffolding, safety belts and other related supporting tools required for construction shall be prepared as complete and safe tools as needed for the project.

3. Fully cooperate with Party A’s relevant units to hold “project safety meetings”.

4. The author promises to be responsible for publicizing the relevant safety and health requirements of this letter of commitment to his construction personnel, and is willing to accept the inspection and supervision of Party A’s on-site supervisors and security personnel. If relevant regulations are violated , willing to accept corresponding punishment.

5. The author promises to assign experienced and qualified supervisors to stay at the construction site during the project to supervise and manage the construction and require quality. Party A is only responsible for the final quality inspection of this project. However, during the construction period, Party A needs to send people to the site to coordinate the progress of the project. The author shall bear all the project safety responsibilities during the construction period.

Person signing the letter of commitment (seal):

Legal representative:

Address:

Date of signing the contract: Year and month

Day

Commitment letter for construction according to drawings Part 2: Quality Commitment Letter and Attachment of Drawing Review Unit

Commitment Letter of Lifetime Quality Responsibility System of Construction Drawing Review Organization

This unit and the main person responsible for the project promise to conscientiously perform the following corresponding responsibilities during the construction process of the project, and assume lifelong quality responsibility in accordance with the law:

(1) Sign a construction drawing entrustment review contract in accordance with the law (Agreement), strictly carry out construction drawing review business in accordance with the recognized review agency category and recognized scope, and do not conduct over-level and out-of-scope reviews or undertake review business in the name of other review agencies, and do not allow other units or individuals to use the name of this unit. Undertake review business, do not accept entrusted review business that has affiliations or other interests with the construction units, surveying, and design companies of the projects being reviewed, and do not use reviewers who have not been recognized or do not meet relevant conditions or who are related to the projects being reviewed. Reviewers with affiliations or other interests in the unit conduct the review.

(2) Conduct policy review and technical review in strict accordance with relevant regulations to ensure that the approved construction drawings comply with the mandatory standards for engineering construction, the foundation and main structure design are safe, and the survey and design enterprises and registrations are ensured Practitioners and relevant personnel have affixed corresponding stamps and signatures on the construction drawings as required, and complied with the requirements of relevant laws, regulations, and rules.

(3) Truthfully inform the relevant units of the violations of laws, regulations and mandatory standards for engineering construction by construction units, survey and design enterprises and registered practitioners discovered during the review. Once raised, the relevant responsible units will not For rectification, report to the construction administrative department

.

(4) The review records of each professional reviewer are complete, and the procedures for signing and sealing the review report issued are complete. Review records, review certificates, complete sets of construction drawings and other relevant materials are filed in a timely manner and kept for a long time. Complete the entrusted review project within the specified time limit. If the review is qualified, the specified number of construction drawings stamped with the special seal for construction project construction drawing review will be provided in a timely manner.

(5) Establish and improve internal technical management and quality management systems and related management systems, strengthen self-discipline, conscientiously perform review responsibilities, do not issue false review reports, and do not handle construction projects that exceed scale or standard design. Issue a construction drawing review report.

(6) Timely review the changes in construction drawing design documents proposed by the construction unit and affix a special seal for construction project construction drawing review.

(7) Quality responsibilities and obligations stipulated in other laws and regulations.

(Official seal of the unit) Signature and seal of the legal representative:

Year, month and day

Commitment letter for construction according to drawings Part 3: Letter of commitment for consistency of construction drawings and design drawings

Commitment letter for consistency of construction drawing design drawings

Qingdao Jimo Construction Project Construction Drawing Design Review Center:

Entrusted by the construction unit, (project name ), our unit has completed the construction drawing design and can submit the construction drawing design for review and go through relevant procedures. For this project, our company will issue a set of construction drawings and design drawings in accordance with the approval opinions of the planning authority*** (including one set submitted to your company and one set archived by our company).

Our unit and the construction unit jointly promise the consistency of each set of construction drawings and design drawings, and jointly bear the relevant responsibilities caused by the inconsistency of the construction drawings and design drawings.

Legal representative of the design unit (signature or seal):

Year, month and day (with official seal of the design unit):

Legal representative of the construction unit ( Signature or seal):

Year, month and day (with the official seal of the construction unit);