In today's social life, each of us may come into contact with the responsibility book, and signing the responsibility book is helpful to the implementation of the responsibility. So how is the relevant responsibility book formulated? The following is the responsibility book (8 general articles) of the security protocol project that I collected and sorted out, hoping to help everyone.
Safety Agreement Project Responsibility Letter 1 In order to further strengthen the company's safety production management and ensure the company's safe operation, according to relevant regulations, the company signed a safety production responsibility letter with employees, and put the safety responsibility into practice for every employee. The current responsibilities are as follows:
First, we must do a good job in safety, always adhere to the policy of safety first, prevention first and comprehensive treatment of X, study hard business and safety knowledge, and constantly improve business skills.
Second, the safety requirements
1, strictly implement the national, superior and company safety management systems, consciously accept safety education and training, have the ability to identify and control the hazards related to this position, master accident prevention measures and emergency plans, and master the safety knowledge and skills of their own work; For those who are required to obtain professional qualification certificates according to national regulations, they should obtain corresponding professional qualification certificates in advance before taking up their posts.
2. Obey the management of the company, earnestly perform safety duties, care for, help and supervise each other, and stop illegal and risky behaviors; In accordance with the relevant regulations, do a good job in safety inspection required by post responsibilities, report hidden dangers and major dangers found in time and take effective measures.
3. Be familiar with the safety, sanitation and fire-fighting facilities, equipment and equipment accessories related to this position, master their usage methods, and carry out maintenance according to regulations.
4. When an accident occurs, take effective measures in time to avoid further expansion of the accident, and report it in time to protect the accident site and related records.
Three. Goal:
1. Ensure zero accidents in job quality, safety, environmental protection and occupational health and safety.
2, according to the plan, consciously participate in learning and training rate of more than 95%.
3, to assist other departments or employees to complete the task rate of more than 95%.
Fourth, rewards and punishments:
1. During the year, the company will assess the above objectives, and if the objectives are achieved, it will be commended and rewarded; If the target requirements are not met, the company will punish according to the relevant regulations depending on the seriousness of the case.
2. If there are major security risks in the post due to personal incompetence, dereliction of duty and other reasons, the company will impose penalties in accordance with relevant regulations and procedures; If a crime is constituted, criminal responsibility shall be investigated according to law.
Five, this responsibility in duplicate, this responsibility shall take effect from the date of signature.
Signature of department head:
Date:
Signature of person in charge:
Date:
Safety Agreement Project Responsibility Letter 2 Party A (Project Department):
Party B (team):
In order to do a good job of fire safety in construction sites, warehouses, etc. , to ensure that the site personnel and property are not harmed by fire, the project department and the construction team sign the following fire safety responsibility agreement:
1. Party A is responsible for establishing and implementing the fire prevention responsibility system and management system, educating Party B on fire safety and popularizing fire prevention knowledge.
2. Party A shall set up fire control facilities as required and do a good job of maintenance.
3. Party B must conscientiously implement the fire prevention responsibility system and management system, earnestly study fire prevention knowledge and improve fire prevention awareness.
4, regular fire safety inspection, found that the fire hidden danger should be rectified immediately, for a while can't rectification, shall immediately notify Party A, organized and coordinated by Party A to solve.
5. Party B's construction or domestic electricity consumption must be strictly implemented in accordance with the norms and procedures, and it is strictly forbidden to install and maintain electrical equipment without authorization and to pull and connect it indiscriminately.
6. Party B must inform Party A when using naked flame in production, and can use naked flame only after going through the examination and approval procedures and having a hot work guardian present.
7. Party B shall not use electric stoves, coal stoves, oil lamps and other appliances that are not conducive to fire safety in the living quarters, and shall not throw cigarette butts and pile up inflammable and explosive articles at will.
8. If the construction site, warehouse and living quarters violate the regulations and cause fire accidents, Party A will impose a fine of100-5,000 yuan on Party B, and hand it over to the relevant departments for handling according to the seriousness.
9. This responsibility letter is made in duplicate, with each party holding one copy.
Representative of Party A:
Representative of Party B:
Safety Agreement Project Responsibility Letter 3 In order to make the normal work on site go smoothly, the principle of putting prevention first is adhered to, and food poisoning and infectious disease outbreaks are strictly prohibited to ensure the safety of employees on site. Establish the idea of "health first, safety first", strengthen the awareness of safety work, and implement food safety work. This site has signed the following safety work target responsibility letter with the canteen staff:
1, food procurement personnel should have a relatively fixed food supply point to purchase. Ensure the quality and freshness of food, and it is strictly forbidden to purchase food and raw materials that have deteriorated and exceeded the shelf life.
2. Cookers must use fresh raw materials to make food, and all ingredients must be cleaned before cooking every day. Processed food must be steamed, and it is strictly forbidden to supply leftovers.
3. Cookware must be cooked separately during food processing, cleaned and stored after use, and disinfected when necessary.
4. The remaining finished and semi-finished products in the canteen must be raw, cooked, separated from meat and vegetables, layered, refrigerated and frozen.
5. Cooking utensils must be cleaned and disinfected strictly after each meal, and cleaning measures should be implemented.
6. Disinfect the internal and external environment of the canteen regularly, and carry out general cleaning to reduce or eliminate mosquitoes and flies.
7. Operate the cooker in strict accordance with the specifications, check and maintain it regularly, and report any damage in time.
8, canteen staff strictly pay attention to personal hygiene, smoking is not allowed in the canteen. Idle people are not allowed in.
9, canteen staff mixing cold dishes, must bring disposable gloves, never allow direct contact with food by hand.
10, due to irresponsible work, dereliction of duty, food poisoning incident, will be investigated for responsibility according to the situation.
This responsibility book is made in triplicate, one for myself, one for the office and one for the deputy general manager in charge, and shall be implemented as of xx, xx, XX.
Person in charge (signature): xx
Xx year xx month xx day
Safety Agreement Project Responsibility Letter 4 Party A (General Contractor): xx
Party B (labor contractor): xx
After negotiation between Party A and Party B, Party A will contract xxxxx to Party B for construction. In order to make the project go smoothly, we will conscientiously implement the policy of safety first and prevention first, standardize and standardize the construction safety management, ensure the construction project to be completed safely, with high quality and on time, further clarify the safety responsibilities of all parties, further improve the overall level of construction safety management of this project, and prevent the occurrence of major casualty accidents. In order to ensure the property and life safety of the country and people, Party A and Party B hereby sign the responsibility letter for safety production of this construction project in accordance with the relevant national laws and regulations such as the People's Republic of China (PRC) Construction Law and the Regulations on Construction Site Management, and abide by it jointly.
A, engineering labor contractor responsibility
1, labor contract construction enterprises are mainly responsible for the safety in production on the construction site. Subcontracting construction enterprises must establish and improve the safety production management system. An enterprise as a legal person is the first person responsible for production safety and is responsible for the production safety of the enterprise.
2, the construction site must establish and improve the responsibility system for production safety, the contractor's project manager is the first person in charge of safety management on the construction site, responsible for the organization and implementation of project safety production.
3. Contracted construction enterprises shall formulate corresponding safety technical measures according to the construction organization design and engineering characteristics; For the partial projects with strong professionalism, special safety schemes should be adopted and measures should be taken to strictly implement them.
4, the construction site should improve all kinds of on-site safety management system, such as the construction site regular safety inspection and regular meeting system, all kinds of equipment, equipment safety acceptance system, safety technical disclosure system, safety production reward and punishment system, safety information management system in the industry and various technical operation procedures and job responsibilities. The construction site must strictly implement the temporary electricity consumption for construction, and resolutely refuse to use it without acceptance procedures or unqualified acceptance.
5. The construction contracting enterprises and construction sites shall strictly implement the laws, decrees, regulations, industry rules, regulations and other management regulations of the state and the construction administrative departments on construction safety. Strictly implement the current Safety Inspection Standard for Building Construction (JG59-99) and Safety Code for Power Supply of Construction Projects (GB50 194-xx). All kinds of illegal command and operation are strictly prohibited. Construction enterprises should strengthen daily safety inspection according to the safety inspection scoring standard, rectify the existing problems in time, and make records.
6, the construction site should have good safety guarantee measures and complete safety facilities. Strictly implement the protection requirements for the edge of the hole, and require the construction around the building to be closed, and set up safe passages when entering the site. And the construction along the street must be closed to ensure the personal safety of passers-by. Construction temporary electricity must adopt three-phase five-wire system.
7. Contracted construction enterprises shall establish and improve the labor safety production education and training system, strengthen the on-the-job education and training of employees, and improve the safety awareness of workers. Special operations personnel must hold relevant certificates.
8. When an accident occurs during construction, the construction enterprise shall take emergency measures to reduce casualties and accident losses, and report to the relevant departments in a timely manner in accordance with relevant state regulations.
9. The construction enterprise shall, in accordance with Article 48 of Chapter V of the Building Law of People's Republic of China (PRC) and the provisions of the State Building Law, insure the construction site against accidental injuries and casualties.
Secondly, the responsibilities of employers.
1. The contractor shall select a construction enterprise that meets the safety qualification to contract the construction according to the relevant national laws and regulations.
2, according to the relevant provisions of the bidding, the contractor shall perform the obligations stipulated in the contract, shall not be arbitrarily pressure level, lower prices, arrears of project funds, etc. To create conditions for ensuring that the funds for safety measures are fully in place.
3. Before the project starts, the contracting unit shall provide the construction subcontractors with all kinds of hidden information related to the construction site, such as underground pipelines, and actively cooperate with the construction enterprises to make safety preparations.
4. The project leader of the contracting-out unit shall at any time urge the construction subcontractors to strengthen safety management, operate in accordance with the operating norms and procedures, and notify the construction unit to deal with the obvious safety hazards on the construction site in time.
Three, the construction project contractor's safety production objectives
(1) Commitment to safety management objectives
1, accident management
This project will prevent the occurrence of four-level and above casualties. The accident rate of serious injury shall be controlled at 0%, and the accident rate of minor injury shall be controlled at 1%.
2. Safety management
(1) According to the safety measures taken in the construction organization design, the project implementation rate is 100% and the capital guarantee rate is 100x%.
(2) The manager in charge of the company or the project manager shall organize safety inspection on the construction site three times a month.
(3) The post responsibility system of functional personnel at all levels on the construction site, and the implementation rate of target responsibility book 100%.
(4) Full-time security officer on the construction site 1 person.
(5) The qualified rate of scaffolding and overhead protection works, construction electricity, construction machinery, special material transportation and hoisting facilities on the construction site is 100%.
(6) The intact rate of all kinds of machinery and electromechanical equipment on the construction site is 100%.
3. Safety education
The pre-job tertiary education rate of workers is 100%, and the special operators are certified to work100%; The safety training rate of construction management personnel is 100%.
Four, this form is in triplicate, the construction unit, the construction unit and Kunming construction engineering quality and safety supervision station each hold one copy.
Legal Representative of Party A:
Site Representative: (Project Manager)
Company (seal)
Legal Representative of Party B:
Person in charge of the site:
Company (seal)
X year x month x day x year xx month x day
Safety agreement project responsibility letter 5 is to further strengthen the safe and civilized production of construction projects, clarify the target responsibility of safety production in construction industry and reduce the occurrence of grey accidents. Promote enterprise management and civilization construction. Specially sign the responsibility book of safety production target:
A, who entered our company to sign an agreement and contract of professional construction units, must establish and improve a complete safety system and operating procedures before construction. Colleagues should establish and improve the management network of work safety and define the division of labor. The person in charge of implementing responsibilities and projects is the person in charge of safety.
Second, organize various forms of publicity and education, conduct on-the-job education and training before entering the site, popularize safety knowledge and put an end to the phenomenon of "three violations". The "three-level education" rate of employee safety has reached 100%.
Three, the special equipment on the construction site must be regularly tested by the relevant departments, and the detection rate is 100%. All kinds of machinery and appliances are not allowed to work in spite of illness; The training rate of special and special types of workers reached100%; Adhere to certificates and strict operating procedures. Must obey the consent of the relevant person in charge of the general contractor to command and dispatch. Work closely with other types of work during construction, and formulate measures to avoid potential accidents to other types of work and ensure the smooth progress of the project.
Four, the construction site electrical wiring must be installed in strict accordance with the specification, it is strictly prohibited to pull, disorderly wire. Overload operation. Electric furnace heating and open flame operation are strictly prohibited in winter to ensure safety.
Five, adhere to the inspection system, in accordance with the provisions, equipped with full-time security personnel (with mount guard safety qualification certificate), found hidden dangers, immediately rectification and make account records, major accidents immediately report to the leadership.
Six, in the construction or construction site area, put an end to all kinds of accidents, such as family area. It is forbidden to bring children into the construction site, and outsiders are not allowed to enter the construction site casually. If it is found that the workers entering the site do not wear safety helmets and do not comply with safety regulations, Party A has the right to punish 200 yuan -xx yuan/person. There are no fatal accidents, acute employee poisoning accidents, major fire accidents and equipment accidents. Once an accident happens, report it to the superior immediately so as to report it step by step. It is strictly forbidden to conceal and not report to the construction site. Upon discovery, legal responsibilities shall be investigated according to the Safety Law and local regulations.
Seven. Party A shall handle accidental injury insurance for construction personnel according to relevant regulations. All consequences of accidents caused by Party B's violation of operating rules during construction shall be borne by Party B.. Construction operations that produce environmental noise pollution during construction, or continuous operations with special process requirements, must be reported to the Construction Management Bureau and the Environmental Protection Bureau for approval.
Eight, this responsibility after signing, as an annex to the contract equally effective.
Party A: (signature and seal)
Party B: (signature and seal)
Xx year xx month xx day
Safety Agreement Project Responsibility Letter 6 According to the company's 20xx work arrangement for safety production and the requirements of the Measures for the Administration of Safety Production, in order to earnestly implement the responsibility system for safety production, effectively prevent all kinds of safety accidents and ensure the smooth realization of safety objectives this year, the project manager and the project doorman (safety) signed the responsibility letter for safety production as follows:
I. Project Safety Objectives
1. accident control objective: put an end to death and serious injury accidents, and the young injury rate shall not exceed10%; Avoid fire and mechanical accidents;
2. On-site safety objective: strictly control the mechanical and electrical operations with "three violations", poor protection, illness and fire hazards, and set up various safety protection facilities on site in a timely, complete and effective manner, with the qualified rate reaching100%;
3. Site environmental objectives: the site layout is standardized, materials are neatly stacked, machines and tools are placed in an orderly manner, the environment is clean and tidy, signs and signs are complete, green construction is carried out, and Shanxi Province's safety and quality standardization site is actively created.
Second, the guard (security) personnel decomposition management objectives
1. No death, serious injury, minor injury or fire accident caused by my dereliction of duty;
2. No material losses, criminal cases, on-site chaos and environmental pollution caused by my dereliction of duty.
Three, the guard (security) personnel safety management responsibilities
1. Stick to your post, wear helmet armbands, keep your clothes and hats clean and polite. Responsible for checking, inquiring and registering people, vehicles and articles entering and leaving the site, and checking when leaving the site. Materials should have exit permit issued by the project department to prevent stolen goods from being brought out;
2. Familiar construction personnel and personnel of this unit shall enter the site for direct release. Strangers should check their certificates, and foreign office workers should obtain the consent of the person they are looking for to register and wear safety helmets before entering the door, and refuse irrelevant personnel to enter the site casually;
3 on-site inspection or guards shall implement the system of on-time inspection and on-time handover. Before the arrival of the successor, the last group of personnel shall not leave their posts. Handover should be clear and recorded.
4. The doorman should pay attention to protect the safety and health inside and outside the door. It is forbidden to leave your post without permission. When on duty, even if no one is on duty, you are not allowed to sleep, lie down or do other things that affect your normal work. Others refused to stay in the guard room for a long time to chat.
5. The doorman is responsible for directing foreign vehicles to park in the designated place, which shall be neat and tidy, and shall not be parked at will, which will affect the normal construction and traffic;
6. No one is allowed to enter the work site without a helmet;
7. Inside and outside the gate and gatehouse 10m is the health responsibility area of the doorman. The general dust and garbage in this area should be cleaned and kept clean by the doorman at any time. If there is any serious waste overflow, the doorman should report to the project foreman in time and send someone to clean it up.
8. If there is mud or sand spilling on the transport vehicle leaving the site, the doorman should remind the driver to release it after the vehicle is washed or covered tightly to prevent environmental pollution at the gate;
9. Security patrol or security guards should strictly abide by their job responsibilities, and report to the project manager in time if they find any abnormal situations and security risks such as theft, destruction, fire hazards, personnel violation, nuisance and entanglement.
Signature of the Minister of Security:
Signature of person in charge (scaffolder):
Xx，xx，XX，XX
Security Agreement Project Responsibility Letter 7 Party A: Party B:
In order to implement the safety production policy of "safety first, prevention first", ensure the implementation of various construction safety measures, ensure the smooth progress of engineering construction, and ensure the personal health and safety of on-site operators. According to "Safety Production Law" and other relevant laws and regulations, combined with the actual situation of this project, both parties signed this responsibility letter on matters related to the safety construction of this project through consultation.
First, the project safety production management objectives
1, seriously implement the national laws, regulations and rules and regulations on safety in production. Adhere to the policy of "safety first, prevention first", strengthen safety management and ensure safe production.
2, put an end to fatal accidents, put an end to major mechanical equipment, poisoning, traffic and fire accidents.
3, put an end to fatal accidents, avoid serious injuries, serious injury rate is less than 0.3%, reduce minor injuries, the annual frequency of work-related injuries is less than 10%.
4. Seriously study and implement the JGJ59-XX standard of the Ministry of Construction to ensure that this project can reach the qualified standardized site.
Two. Safety responsibilities of Party A (captain or team leader):
1, strictly abide by the safety laws and regulations and the relevant responsibility system for production safety, arrange the work reasonably according to the technical, physical and ideological conditions of the team members, and do a good job in safety technical disclosure. When a team assigns two or more jobs, a temporary person in charge must be appointed to take charge of the safety work and be responsible for the safety team.
2, organize team members to learn safety technology operating rules, carry out safety activities, adhere to the safety speech before class, explain the matters needing attention in detail, and fill in the team activity record every day.
3. Conduct on-site safety education for the newly transferred workers, be familiar with the environment and posts, and designate special personnel to be responsible for personal safety.
4, often check the safety production site, handle or report in time when problems are found.
5, urge the workers on duty to use personal protective equipment correctly.
6, education team members stick to their posts, not illegal command, not illegal operation, not in violation of labor discipline, at the same time to do a good job of self-inspection, mutual inspection, handover inspection.
7. Obey the unified coordination and management of the project department personnel, be responsible for the civilized construction in the construction area, and ensure that the regional civilization and environmental sanitation meet the standards.
8, inductrial injury accident to rescue immediately, to record in detail and report in time, organize the class personnel to carefully analyze the reasons, put forward preventive measures, major casualty accidents to protect the scene and report in time.
Three. Safety responsibilities of Party B (team member):
1, the worker is the first person responsible for production safety in this position, and is responsible for the safety of himself, the environment and others in his work.
2, keep in mind the safety in production, everyone's responsibility, prevention first, safety first policy, to participate in safety activities, know safety education.
3. Seriously study and master the safety operation procedures and related safety knowledge of this type of work, conscientiously implement the requirements of safety technical disclosure, and obey the supervision and guidance of safety production management personnel with an open mind.
4, the correct use of protective, cold supplies and safety production equipment, take good care of the safety signs of safety facilities, obey the distribution, stick to their posts, and do not start other people's operations at will. Mechanical and electrical equipment, strictly abide by job responsibilities and safety operation procedures.
5. Do not drink for four hours before going to work; Strictly implement the "three-work system" and improve the safety production level of self-prevention, mutual prevention and joint control.
6, check the tools and equipment used before going to work, after work for cleaning, maintenance, maintenance, found unsafe factors in the work, to immediately report to the class, team leader, and put forward suggestions for improvement.
7, beware of safety accidents, to ensure the realization of the goal of safe production, in the event of an accident, the courage to rescue, and immediately report to the superior.
8. In case of an accident or near-miss accident, immediately report to the team leader, participate in accident analysis, draw lessons from the accident, and put forward reasonable suggestions for improving safety production and working conditions.
9. Have the right to report all the information about safety in production, and have the right to refuse the construction in case of serious personal danger and no guarantee measures, and report it immediately or to the relevant departments.
Fourth, others:
1. After signing, it means that both parties (responsible persons) are familiar with the safety responsibilities of this post and are willing to earnestly perform them.
2. This responsibility letter shall come into effect and be terminated as of the date of signing, and shall be terminated at the same time after the expiration or termination of the labor contract of the team (worker).
3. Number of copies: This agreement is made in triplicate, with the same effect. One for Party A, one for Party B and one for Project Department.
Party A: (Seal) Party B: (Seal)
Representative: (signature) Project Manager: (signature)
Responsibility Letter of Safety Agreement Project 8 In order to conscientiously implement the policy of safety first and prevention first and strengthen the management of safety production, this responsibility letter is formulated in accordance with national and provincial laws and regulations on safety production.
Party A:
Party B:
I. Responsibility of Party A
1, seriously implement the national, provincial and xx, xx safety guidelines, policies and regulations;
2. Regularly inspect, supervise and guide the safety production of subordinate units;
3, seriously investigate and deal with major safety accidents, and urge the rectification of major accidents;
4, organize safety education, summarize and popularize the advanced experience of safety production;
5. Organize safety production appraisal competitions, commend advanced collectives and individuals in safety production work, and promote the development of safety production work.
Two. Party B's responsibilities
1, organize the implementation. The first person in charge of the unit personally pays attention to safety work, and the safety organization is sound and equipped with safety inspectors;
2, ideological implementation. Carry out in-depth and extensive publicity and education activities on safety production for employees and their families, popularize safety knowledge education, vigorously publicize good deeds and advanced models emerging in safety production work, and enable employees to firmly establish the idea of safety first;
3. Implementation of measures. Conduct regular safety inspections, find hidden dangers in time, put forward rectification measures, and eliminate all unsafe factors in the bud; Take timely measures for accidents to minimize economic losses; Investigate and analyze the cause of the accident, clarify the responsibility, put forward handling opinions, and report to the X Safety Committee for approval and implementation;
4. System implementation. Conscientiously implement the guidelines, policies and regulations of the party and the state on production safety, and establish and improve various safety management systems in light of the actual situation of the unit, so as to have rules to follow, clear rewards and punishments, and strengthen supervision and management;
5. Responsibility implementation. It is necessary to establish a post responsibility system for safety production at all levels, clarify the division of labor and responsibilities, and carry out their duties.
Three. target
1, catastrophic accidents and major accidents are zero;
2, the general accident mortality and serious injury rate is 0;
3 major accidents rectification rate of more than 95%, the general accident rectification rate of more than 90%;
4, special operations personnel certificate rate100%;
5. The accident timely resolution rate is 100%.
Fourth, rewards and punishments.
1. In case of serious casualty accident, the salary of this unit cannot be promoted in the current year, and the person in charge of safety cannot be promoted by withholding the annual bonus until the disciplinary responsibility and criminal responsibility are investigated.
2. 2% of the total wages of the unit and 1% of the total wages will be deducted from the excess mortality rate and serious injury rate, and the person in charge of safety will be deducted for three months or one month respectively;
3, economic loss accidents, resulting in direct economic losses of more than 654.38+10,000 yuan but less than 500,000 yuan, the person in charge of safety shall be fined for half a year; If the direct economic loss is between 500,000 yuan and 654.38 million yuan, the annual bonus of the person in charge of safety will be deducted and the bonus of all employees will be deducted for three months;
4. If the casualty accident is not reported in time, the person in charge of safety will be fined 100~200 yuan, and if the accident is not reported or the investigation is hindered, it will be fined 300~500 yuan;
5, no accidents throughout the year, accident hidden danger rectification rate reached 100% units, according to the production and operation of the year-end assessment results to cash bonuses, political achievements as an important basis for assessment and promotion.
Party A: (signature and seal of the person in charge of the unit)
Party B: (signature and seal of the person in charge of the unit)
Two years, x years, x months and x days
;