Windows blue screen error
The 1 0×000000 1 function is incorrect.
2 0×00000002 The system could not find the specified file.
3 0×00000003 The system cannot find the specified path.
4 0×00000004 The system cannot open the file.
5 0×00000005 Access denied.
6 0×00000006 Invalid code.
7 0×00000007 The memory bank control block has been corrupted.
8 0×00000008 There is not enough storage space to process this instruction.
9 0×00000009 The address of the body control block is invalid.
10 0×000000 a environment is incorrect.
1 10× 000000b tried to load a malformed program.
12 0×000000 c access code error.
13 0×0000000D data error.
140×000000 e There is not enough storage space to complete the operation.
150×000000 f The system cannot find the specified disk drive.
160×00000 10 Unable to delete the directory.
160×00000 10 Unable to delete the directory.
17 0× 00000011The system cannot move files to other disk drives.
18 0×00000 12 has no file.
190×00000 13 storage media is write-protected.
The 20 0×000000 14 system cannot find the specified equipment.
2 1 0×00000 15 equipment is not ready.
The 22 0×000000 16 device cannot recognize the instruction.
23 0×000000 17 data error (cyclic redundancy check)
The 24 0×000000 18 program issued an instruction with the wrong length.
The 25 0×000000 19 disk drive cannot find a fixed sector or track on the disk.
26 0×000000 1A cannot access the specified disk or disks.
27 0×000000 1B disk drive cannot find the required sector.
28 0×000000 1C printer has no paper.
29 0×000000 1D system cannot write data to the specified disk drive.
The 30 0×000000 1E system cannot read the specified device.
3 1 0×000000 1F It is useless to connect to the equipment in the system.
32 0×00000020 This process cannot access the file because it is being used by another process.
33 0×0000002 1 Part of the file is locked and cannot be accessed now.
34 0×00000022 The disk of the disk drive is incorrect. Please insert %2 (volume serial number: %3) into drive% 1.
36 0×00000024 There are too many open shared files.
38 0×00000026 Reached the end of the file.
39 0×00000027 Disk is full.
50 0×00000032 does not support this network requirement.
5 10×0000033 The remote computer cannot be used.
52 0×00000034 Duplicate network name.
53 0×00000035 Network path not found.
54 0×00000036 The network is busy.
55 0×00000037 The specified network resource or device is no longer available.
56 0× 00000038 has reached the command limit of network BIOS. 57 0× 00000039 There is something wrong with the network adapter.
The server specified by 58 0×0000003A cannot perform the required job.
An unexpected error occurred in the 59 0×0000003B network.
The 60 0×0000003C remote adapter card is not compatible.
6 10×000003d printer queue is full.
62 0×0000003E server space cannot store files waiting to be printed.
63 0×0000003F The file waiting to be printed has been deleted.
64 0×00000040 The specified network name cannot be used.
65 0×0000004 1 Access to the network is denied.
65 0×0000004 1 Access to the network is denied.
66 0×00000042 Network resource type is wrong.
67 0×00000043 The network name cannot be found.
68 0×00000044 exceeds the name limit of the regional computer network adapter card.
69 0×00000045 exceeds the limit of network BIOS session.
70 0×00000046 The remote server has been suspended or is starting.
7 1 0×00000047 Unable to connect to this remote computer at this time because the number of connections has reached the upper limit.
72 0×00000048 The specified printer or disk device has been suspended.
80 0×00000050 file already exists.
82 0×00000052 Unable to create directory or file.
83 0×00000053 INT 24 failed.
84 0×00000054 The requested storage cannot be used.
The name of the 85 0×00000055 near-end device has already been used.
86 0×00000056 The specified network password is incorrect.
87 0×00000057 parameter error.
There is an 88 0×00000058 data writing error in the network.
89 0×00000059 At this time, the system cannot perform other trips.
100 0×00000064 Unable to establish other system signals. 10 1 0×00000065 belongs to other special semaphores.
1020×0000066 semaphore has been set and cannot be closed.
1030×0000067 Unable to specify semaphore.
1040×0000068 Unable to request a dedicated semaphore during the interrupt.
1040×0000068 Unable to request a dedicated semaphore during the interrupt.
105 0×00000069 The previous ownership of this semaphore has ended.
106 0×0000006A Please insert the disk into% 1.
1070×000006 b The program has stopped because the replacement disk is not inserted.
108 0×000006 c disk is in use or locked.
109 0×000006d pipeline has been suspended.
The system cannot open the specified device or file.
The file name of110× 000006f is too long.
1 120×0000070 Insufficient disk space.
1130× 0000071No internal file identifier is available.
1 140×0000072 The target internal file identifier is incorrect.
1 170× 0000075 The IOCTL call executed by the application is incorrect.
1 18 0×00000076 The value of the write verification parameter is incorrect.
The requested instruction is not supported by the system.
120 0×00000078 This function is only valid in Win32 mode.
12 10× 0000079 semaphore exceeded the timeout period.
122 0×0000007A The data area transmitted to the system call is too small.
123 0×0000007B The file name, directory name or volume label syntax of the storage unit is incorrect.
124 0×0000007C system call hierarchy is incorrect.
125 0×0000007D disk has no volume label set.
126 0×0000007 The specified module cannot be found.
127 0×0000007 The specified program cannot be found.
128 0×00000080 There is no waiting sub-trip.
128 0×00000080 There is no waiting sub-trip.
129 0× 00000081%1This application cannot be executed in Win32 mode.
130 0×00000082 attempted to perform a non-original disk I/O operation using the file handle of the open disk partition.
13 10×0000083 Try to move the file pointer before the beginning of the file.
132 0×00000084 Unable to set the file pointer on the specified device or file.
The 133 0×00000085 JOIN or SUBST instruction cannot be used for disk drives containing prebinds.
134 0×00000086 Try to use the JOIN or SUBST command on the combined disk drive.
135 0×00000087 Try to use the JOIN or SUBST command on the replaced disk drive.
136 0×00000088 The system tried to delete the link relationship of unconnected disk drives.
137 0×00000089 The system tried to delete the replacement relationship of the disk drive that was not replaced.
138 0×0000008 The system tries to combine disk drives into the directory of combined disk drives.
139 0×0000008B The system tried to replace the disk drive with the directory of the replaced disk drive.
140 0×0000008C system tries to replace the disk drive with the directory of the replaced disk drive.
14 1 0×000000 The system tried to replace the disk drive with the combined disk drive directory.
142 0×0000008E system cannot perform JOIN or SUBST at this time.
143 0×0000008F system cannot combine disk drives or replace directories under the same disk drive.
144 0× 0000090 This directory is not a subdirectory of the root directory.
There is still data in 1450×000009 1 directory.
The path specified by 146 0× 0000092 has been replaced.
1470×0000093 Insufficient resources to process this instruction.
The path specified by 148 0× 0000094 cannot be used at this time.
The path specified by 148 0× 0000094 cannot be used at this time.
149 0× 0000095 The disk drive directory you are trying to merge or replace is the target that has been replaced.
150 0×0000096 configuration. SYS file does not specify system tracking information, or the tracking function is cancelled.
15 10× 0000097 The number of semaphore events specified is incorrect.
1520× 0000098 dosmuxsemwait not executed; Too many semaphores are set.
1530× 000099 Dosmuxsemwait list is incorrect.
1540×0000009 The storage medium symbol length limit you entered.
1550×000009 b Unable to create other threads.
156 0×0000009C receives the trip rejection signal.
157 0×000009d part has been discarded and cannot be locked.
158 0×000009 e segment has been unlocked.
The address of 159 0×000009 f thread ID is incorrect.
160 0×000000A0 The argument string passed to DosExecPgm is incorrect.
1610× 00000a1The specified path is incorrect.
162 0×000000A2 signal is waiting to be processed.
164 0×000000A4 system cannot create thread.
167 0×000000A7 failed to lock part of the file.
The resources required by 170 0×000000AA are in use.
1730×000000ad The locking requirement of the cancellation range is not obvious.
174 0×000000AE file system does not support automatic change of lock type.
180 0×000000B4 system found incorrect part number.
182 0×000000B6 The operating system cannot execute% 1.
182 0×000000B6 The operating system cannot execute% 1.
The file 183 0×000000B7 already exists. Cannot create the same file.
The flag sent by 186 0×000000BA BA is wrong.
The system flag specified by 187 0×000000BB cannot be found.
188 0×000000BC operating system cannot execute% 1.
189 0×000000BD operating system cannot execute% 1.
190 0×000000BE operating system cannot execute% 1.
19 1 0×000000BF cannot execute% 1 in Win32 mode.
The operating system of 192 0×000000C0 cannot execute% 1.
1930× 000000c1%1is not a correct Win32 application.
194 0×000000C2 operating system cannot execute% 1.
195 0×000000C3 The operating system cannot execute% 1.
196 0×000000C4 operating system cannot execute this application.
197 0×000000C5 operating system cannot execute this application at present.
198 0×000000C6 operating system cannot execute% 1.
199 0×000000C7 operating system cannot execute this application.
200 0×000000C8 program code segment cannot be greater than or equal to 64KB.
20 10×00000 C9 operating system cannot execute% 1.
The 2020× 0000000 CA operating system cannot execute% 1.
The 2030× 0000000 CB system cannot find the entered environment option. \r
2050× 0000000 CD is in the instruction subdirectory, and there is no signal sub-processor with any stroke.
The file name or extension of 206 0× 0000000 ce is too long.
207 0×000000CF ring 2 stack is in use.
207 0×000000CF ring 2 stack is in use.
208 0×000000D0 Enter a common file name element * or? Incorrect, or too many common file names have been specified.
209 0×000000D 1 The transmitted signal is incorrect.
2 10 0×000000D2 cannot set the signal processor.
2 12 0×000000D4 section is locked and cannot be reconfigured.
2 14 0×000000D6 There are too many dynamic link modules attached to this program or dynamic link module.
2 15 0×000000D7 cannot nest calls to LoadModule.
230 0×000000E6 pipeline status is invalid.
23 1 0×000000E7 All pipeline instances are busy.
232 0×000000E8 pipeline is closing.
There is no process at the other end of the 233 0×000000E9 pipeline.
234 0×000000EA has more information available.
The operation phase of 240 0×000000F0 was cancelled.
254 0×000000FE The specified extended attribute name is invalid.
The properties of 255 0×000000FF extension are inconsistent.
259 0×00000 103 No data.
266 0×00000 10A cannot use the replication API.
267 0×00000 10B directory name is wrong.
The 275 0×00000 1 13 extended attribute is not applicable to the buffer.
276 0×00000 1 14 The extended properties file on the external file system is corrupted.
277 0×00000 1 15 extended attribute table file is full.
278 0×00000 1 16 The specified extended attribute code is invalid.
278 0×00000 1 16 The specified extended attribute code is invalid.
282 0×00000 1 1A This file system does not support extended attributes.
288 0×00000 120 intends to release a mutex that does not belong to the caller.
298 0×00000 12A semaphore has been transmitted too many times.
299 0×00000 12B only completed some requirements of reading/writing ProcessMemory.
3 17 0×00000 13D system cannot find the message with the number of 0×0000% 1 in the message file %2.
487 0×00000 1E7 attempted to access an invalid address.
The operation result of 534 0×000002 16 exceeds 32 bits.
535 0×000002 17 has a trip at the other end of the channel to receive and send data.
536 0×000002 18 Wait for the trip to open the other end of the channel.
994 0×000003E2 Access to extended attributes is denied.
995 0×000003E3 The I/O operation was abnormally terminated due to the end of the thread or the requirements of the application.
996 0×000003E4 overlapping I/O event is not set to notification status.
997 0×000003E5 is processing overlapping I/O jobs.
998 0×000003E6 Invalid Access to Memory Location.
999 0×000003E7 An error occurred while executing the in-page operation.
I hope it helps you!