First, make sure that your CD-ROM drive is the first boot sequence and supports booting from CD-ROM drive.

To install from the CD, please set the BIOS so that the system can boot from the CD. The method is as follows:

(1) Start the computer. When the prompt message "Press Del key to enter BIOS setup" appears on the screen, press DEL key on the keyboard to enter the BIOS setup interface of the motherboard.

(2) Select the advanced BIOS function option, and then press Enter to enter the setup program. Select the first boot device option, and then press the Page Up or Page Down key on the keyboard to set this option to CD-ROM so that the system can boot from CD.

(3) Return to the main menu and save the BIOS settings. (the saving method is: press F 10, and then press y).

(4) Then put the CD into the CD-ROM drive and restart the computer. The system will boot from the CD and the installation wizard interface will be displayed. You can follow the prompts to install the settings step by step.

After Windows XP copies files to the hard disk and restarts the computer for the first time, you must remove the CD from the CD-ROM drive, otherwise the system will still

Booting from the CD will cycle through the installer.

Method 2:

Then, press any key to enter the CD boot mode and load the mini version of the operating system.

Then, press Enter to confirm the installation.

Then, press F8 to accept the license agreement.

Then, choose the location to install, choose a large enough space, and press enter.

Then, select the file system, recommend NTFS, and press Enter.

Then, you will enter ScanDisk and copy the installer to your hard disk.

Then, the computer will restart after 15 seconds, and press Enter to restart immediately.

Then, continue the installation process from the hard disk. At this point, the graphical interface mode starts.

After a series of hardware tests, you will enter the region selection prompt, where you can configure the language, keyboard and region.

Then, you will be prompted to enter the user name and organization name and generate a computer name that you can change.

Then, you will be prompted to enter the product registration code.

Then, you will be prompted to enter the administrator password.

Then, the component selection box will be displayed to select the Windows component to install.

Then, you will enter the setting of time zone and time.

Then, enter the network component installation (if your computer has a network card and is correctly identified in the hardware test).

After configuring the network, the computer will detect and install a series of Windows components and services.

Then, restart and run the newly installed Windows.

Then, enter the final stage of installation and monitor the plug-and-play hardware that was not detected before.

It finally works!

Method 3:

Install the system (take WINDOWS XP as an example below)

I chose a complete Windows XP installation CD without any cracking. Start the computer, press enter when the words "press any key to start the CD" appear, start copying the installation program, and check the capacity and format of the system disk location, which can be ignored; When choosing the file format of the system hard disk, it is best to choose AT32 instead of NTFS. Although ntFS file system greatly improves the stability and speed of xx operating system and the hard disk management function, NTFS only supports Windows NT, Windows2000 and WindowsXP with NT as the kernel, but does not support DOS, WindowsME and Windows98. So it is not suitable for those of us who often play software. Once the system crashes, you can reinstall the system by repartitioning and formatting under NTFS. As long as the system is repartitioned, the data and information on the hard disk will be completely finished. This is the lesson I learned from countless losses. When I used Windows2000, I used NTFS system, which was mainly used to prevent CIH virus from damaging the system and hardware, but now it is too easy to prevent and kill CIH. On the contrary, under the FAT32 file system, as long as there is a 98 or Me boot disk formatted with disk C, I can reinstall the system, and I am not afraid that all the data on the hard disk will be lost. (I don't talk about zoning here, but I will talk about zoning later, including the actual practice of FDISK and DM. Zoning is a dangerous and troublesome thing. )

Next, copy the system files and prepare for installation. The dialog box for selecting time zone and language appears, and I don't need to say it. Wait patiently.

If XP was originally installed under DOS, you must first copy the smartdrv.exe file (named smartdrv.exe in the installation directory of Win98) to the 98 startup floppy disk and run it before installation, which greatly improves the installation speed. I sometimes run it before installation and sometimes forget it, but I don't feel much difference. Maybe my computer has a large memory? If XP is reinstalled under the condition that the original system is unchanged and the system hard disk has xx as the system, the "Upgrade/New Installation" dialog box will appear during the installation process, and you must choose to upgrade at this time, unless you want to install dual xx as the system on your computer.

If a serial number is required, please enter the following numbers:

BX6HT-MDJKW-H2J4X-BX67W-TVVFG

This registration code can basically be installed (I have tried at least 5 or 6 XP installation disks). Generally, the installation time does not exceed 60 minutes.

After installation, choose not to activate it now and then activate it later. Press Next, fill in at least one name, such as JixXP, and press Enter all the time, that's all.

Now start to activate the system: I used the activation method of Russian hackers. Please refer to the following instructions:

Method: copy SETUPREG. HIV to the %systemroot%system32 directory to overwrite the original file (I can't find this SETUPREG. HIV, but I pasted it directly), restart, press F8 to enter safe mode, log in as an administrator, and run WINXP_CRK. EXE, restart it, enter WinXP, select "mobile phone activation" when asking for activation, and fill in "4000" in each square box.

4. Necessary setup and installation of some drivers.

(1) Enter the control panel (or right-click my computer and click Properties), open the system, select System Restore, and turn off the restore function of all disks.

(2) In the system, click Advanced to reset the error report (if this option is not turned off, there will always be an application form to complain to Bill Gates, which is annoying).

⑶ There are sound cards, video cards and cat drivers for general notebook computers, which can be installed automatically. I will focus on the desktop. Click Control Panel, click System, click Hardware, click Device Manager, uninstall all items with question marks and exclamation marks, and then click OK to close the system items.

Take out the drive disk you carry with you and put it in the CD-ROM drive. Click "Add Hardware" in the control panel again, and when the selection dialog box appears, if you know the directory and location of your driver, you can select it manually; If you don't know, please select automatic. Sound card, video card and cat driver are all the same. If you don't have a dedicated driver for XP, there are two ways to solve your problem. First of all, you can use the Win2k (Windows2000) driver of the plug-and-play device for installation. XP and 2K have the same kernel and no difference in drivers. During the installation process, a dialog box without Microsoft signature may appear. Ignore it and just click "Yes". If you don't even have a Win2k driver, there is only another way. First, find out the manufacturer and model of your equipment, print the manufacturer and model on the general manual or on the board and card, then go to the manufacturer's website from the computer with internet access, select the model and download it directly. Then use floppy disk or USB flash drive or mobile hard disk to transfer to the computer for installation. The floppy disk has a small capacity, so I'm afraid it won't fit. )

(4) Graphics card settings

Click Display in the control panel, and other options can be selected according to your computer. The best pixel is 800× 600,32 true color. Click Advanced, and then click Monitoring. The screen refresh frequency of cathode ray tube display is 75HZ or 85HZ, and that of liquid crystal display is 60HZ.

5] Set the network connection.

I won't talk about broadband settings, just dial-up Internet settings.

Click Network Connections in Control Panel, click Create New Connection, click Connect to the Internet, and then click Manual Settings.

Click "Modem" and add a name, such as * * *, phone number, password and verification password. You can surf the Internet.

[6] Sound Settings

Click the sound and audio devices in the control panel, select the volume icon in the taskbar, and then click Apply; As for other options, you can set them according to the actual situation of the computer and your own hobbies.

5. Restore the mailbox, account number and address book.

According to the menu steps when exporting, change the original "export" to "import" and do xx. I won't repeat it, hehe, if you can't do xx, then you are really stupid, so don't read this article.

Step 6 restore fonts

Open the backup font information. If there is a recovery program, click it directly. If not, replace it directly. I mainly aim at intelligent ABC and ziguang pinyin input method. I haven't used other input methods, so I'm not familiar with them. You'd better study them yourself.

7. My document has been reset.

Repeat the above steps when exporting, just merge and link the two folders.

8. It is recommended that you install the following utility software on your computer:

(1) WinZip 8. 1 (general compression software)

Winrar 3.2 (the best compression software)

(3) Microsoft Office XP (International Office System)

⑷ AcadSee5.0 (graphic recognition software)

Jinshan 2003 (Instant English-Chinese Translation Software)

Kingsoft Internet Security 2003 (the best antivirus software in China)

(7) Once Winamp 2.8 (the best Mp3 music playing software)

Being ⑻windvd 4.0(DVD, VCD audio and video playback software)

Levies flashget1.40 (the best online download tool)

The above softwares are all my favorites. Generally, it can be downloaded from the Internet. Office XP, Kingsoft, Kingsoft Internet Security and other software. It's too big, so you'd better buy a CD to install it.

In addition, it is best to install a system optimization software. In the domestic system optimization software, Windows optimization master (author: Jin Lu) and super rabbit magic setting (author: Cai Xuan) are the first to be popularized. WindowsXP itself is highly optimized, so it is of no practical significance to optimize the system. But WindowsXP doesn't set the secondary cache of CPU, so you can use either of these two softwares for optimization. For example, the CPU secondary cache of my notebook is 256K K K. I didn't reset it in the registry, but set it with rabbit magic.

9. Finally, defragment the disk.

Open my computer, right-click C:, click Properties, click Tools, click Start Finishing, and finally click Defragmentation, and then click OK. At this point, the installation is complete.