Question 2: What should I do if I want to take the laboratory technician qualification certificate? The qualification certificate of laboratory technician generally includes two sets of papers: Basic Knowledge of Laboratory Theory and Basic Knowledge of Laboratory Practice. Exams are generally not difficult.
The general exam is not difficult. The highest level of compliance with the proposal depends on the individual's educational background and service years. According to the latest national vocational guidance requirements, laboratory staff belong to national special jobs and must hold national vocational qualification certificates. Chemical verification can only be obtained in the vocational training base under the State General Administration of Quality Supervision, which is a valid certificate.
Note: Don't take part in the assessment in those places or provinces, otherwise working in other places may not be recognized, because local protectionism in some areas is still quite serious.
Question 3: What should I do if I want to take the laboratory technician qualification certificate? Go to the vocational skill appraisal guidance center of the local labor department for consultation.
Those who pass the vocational skill appraisal and certification examination will be awarded the registered vocational qualification certificate stamped with the special seal of the National Vocational Qualification Certification Center (JYPC). Certificate of authority, universal. Application conditions: (meet one of the following conditions) 1. Assistant food inspector: 1, bachelor degree or above or equivalent; 2. College degree or above or equivalent with relevant practical experience; 2. Food inspector: 1, who has passed the qualification certification of assistant food inspector; 2. Graduates with postgraduate education or equivalent; 3. Bachelor degree or above or equivalent and engaged in related work for more than one year; 4. College degree or above or equivalent and engaged in related work for more than two years. 3. Senior food inspector: 1, who has passed the food inspector qualification certification; 2. Have a graduate degree or above or equivalent and have been engaged in related work for more than one year; 3. Bachelor degree or above or equivalent and engaged in related work for more than two years; 4. College degree or above or equivalent and engaged in related work for more than three years.
Question 4: What level is required to take the laboratory technician's certificate? Chemists are graded and have a unified national examination. You can check it.
The following are the responsibilities of laboratory technicians in two units for reference only.
Job responsibilities of laboratory technicians
First, strictly and meticulously do a good job in water quality testing, effectively control the quality, and ensure that the water quality of ex-factory products is 100% qualified.
Two, every day in the finished product packaging workshop or barrel workshop sampling inspection. During operation, the straw is cleaned with sterile water first, and then put into the pressure cooker for disinfection to ensure that the whole test process is completed in a sterile state.
Three, found that the test results exceed the standard or there are signs of exceeding the standard (less than three Escherichia coli per 100 ml, and the number of bacteria per ml is less than 100), to directly sample the water treatment for further testing, and analyze the reasons.
Four, after the test results come out, we should carefully fill in the test sheet, so that the figures are accurate and the information is complete, and send it to the leader in charge of production for signature.
Five, the laboratory instruments should be cleaned in time after use, and the laboratory room should always be kept in a good sanitary condition, so that the windows are clean and spotless.
Six, in addition to the water quality test work, according to the needs and leadership arrangements, complete the finished product packaging and other tasks.
The duty of a chemist
A, when collecting specimens, strictly implement the check system, do not meet the requirements of the specimens from the collection, general inspection specimens should be issued before coming off work on the same day, emergency inspection specimens to complete the report at any time.
Second, we should carefully check the inspection results, fill in the inspection report, register, sign and issue a report. When the inspection results are inconsistent or suspicious, we should take the initiative to contact the prison bed for re-inspection.
3. Stay for 24 hours after the release of special standards. In general, standard vehicles and appliances should be disinfected immediately, and contaminated appliances should be autoclaved before cleaning. Suspected pathogenic microorganisms should be burned at designated places to prevent cross-infection.
Four, to ensure inspection and treatment, regularly check the sensitivity of reagents and proofreading instruments.
Five, actively cooperate with medical and scientific research, to carry out new inspection projects.
Six, strains, viruses, highly toxic reagents, flammable, explosive, strong acid, strong alkali and valuable instruments should be properly kept by designated personnel and regularly checked.
Question 5: What certificate can chemists take? Chemists must hold the professional qualification certificate of national chemist before they can take up their posts. According to the latest national vocational guidance requirements, laboratory staff belong to national special jobs and must hold national vocational qualification certificates. Chemical verification can only be obtained in the vocational training base under the State General Administration of Quality Supervision, which is a valid certificate. Chemist's certificate is divided into five grades: junior, intermediate, senior, technician and senior technician, in which senior is equivalent to assistant engineer, technician is equivalent to engineer and senior technician is equivalent to senior engineer. Technicians and senior technicians belong to national high-tech talents, enjoy social security and pension subsidies, and enjoy preferential policies for households in major cities. The scope of application of the laboratory technician qualification certificate includes chemical products, coal products, petroleum products, daily chemical products, chemical fertilizers, chemical pesticides, pigments and coatings, additives, building materials, water treatment products, gas detection and other laboratory tests. The ways to identify the qualification certificate of experimental technicians are divided into theoretical examination and skill examination. After graduation, the National Vocational Qualification Certificate will be issued by the Vocational Skills Appraisal and Guidance Center of the Quality and Technical Supervision Industry and the Ministry of Labor and Social Security (the certificate is valid for a long time, without annual examination, and it is the qualification certificate of the vocational skill level of chemical laboratory personnel).
Question 6: What books do water quality chemists need to read, what qualification certificate to take, and how to register for study? Water and wastewater monitoring and analysis methods (fourth edition) must be read, and the national standard for water quality data monitoring methods must be read. It is difficult for water quality chemists to master it easily and skillfully. Just in the waterworks, you can basically get started by learning from the master for a few days.
Textual research: At present, some water quality inspections have been cancelled. You can take an examination of water quality inspection division or chemical examiner (it may be cancelled). There are also general local monitoring stations, which regularly report to training courses and will give you a certificate similar to the work permit, which is only for local use. This certificate is also good.
Question 7: I want to get a laboratory technician qualification certificate. How can I take an examination of the professional appraisal center under the listed personnel bureau, register directly, participate in training courses, have an exam after training, and issue certificates after passing?
I got a laboratory technician's certificate in Harbin, because few people got this certificate, so it is impossible for a training class to be run by one person or several people, so more people may be needed to start the class. When I did it, because the unit had to participate in the provincial inspection and was anxious to get the certificate, I explained the situation in detail with the leaders there and asked for information. As a result, I didn't attend the training, so I was issued a certificate directly. At that time, I said that I would have to make up for the training courses and exams in the future, but I didn't make up for it in the end. I have a primary certificate, 600 yuan, no annual inspection.
Question 8: If I want to test what books laboratory operators need to read, 1. Feed physical index test; 2. Inspection of routine ingredients in feed; 3. Determination of feed hygiene index; 4. Inspection of feed additives; 5. Feed inspection design and laboratory management; Feed inspection laboratory technician is a professional type of work. Laws and regulations also require laboratory technicians to have relevant inspection qualifications. But it doesn't specify what kind of certificate it is, which can be proved by the society.
Question 9: What are the duties and work contents of the laboratory technician? What are the qualifications for taking the exam? Chemists are graded and have a unified national examination. You can check it. The following are the responsibilities of laboratory technicians in two units for reference only. Job responsibilities of laboratory technicians. Strictly and meticulously do a good job in water quality testing, effectively control the quality, and ensure that the water quality of ex-factory products is 100% qualified. Two, every day in the finished product packaging workshop or barrel workshop sampling inspection. During operation, the straw is cleaned with sterile water first, and then put into the pressure cooker for disinfection to ensure that the whole test process is completed in a sterile state. Three, found that the test results exceed the standard or there are signs of exceeding the standard (less than three Escherichia coli per 100 ml, and the number of bacteria per ml is less than 100), to directly sample the water treatment for further testing, and analyze the reasons. Four, after the test results come out, we should carefully fill in the test sheet, so that the figures are accurate and the information is complete, and send it to the leader in charge of production for signature. Five, the laboratory instruments should be cleaned in time after use, and the laboratory room should always be kept in a good sanitary condition, so that the windows are clean and spotless. Six, in addition to the water quality test work, according to the needs and leadership arrangements, complete the finished product packaging and other tasks. The duty of a chemist. When collecting specimens, strictly implement the check system. If the specimen does not meet the requirements, it should be collected again. General inspection should be reported before work on the same day, and emergency inspection specimens should be reported at any time. Second, we should carefully check the inspection results, fill in the inspection report, register, sign and issue a report. When the inspection results are inconsistent or suspicious, we should take the initiative to contact the prison bed for re-inspection. 3. Stay for 24 hours after the release of special standards. In general, standard vehicles and appliances should be disinfected immediately, and contaminated appliances should be autoclaved before cleaning. Suspected pathogenic microorganisms should be burned at designated places to prevent cross-infection. Four, to ensure inspection and treatment, regularly check the sensitivity of reagents and proofreading instruments. Five, actively cooperate with medical and scientific research, to carry out new inspection projects. Six, strains, viruses, highly toxic reagents, flammable, explosive, strong acid, strong alkali and valuable instruments should be properly kept by designated personnel and regularly checked.