Contract appears to meet the objective requirements of private ownership of commodity economy, and it is a legal manifestation of commodity exchange. The following is a simple (5-piece) selection of product purchase and sale contract templates that I have compiled. I hope you like them.

Model product purchase and sale contract is simple 1

ContractNo.:

Demander unit: (Party A for short)

Supplier unit: (Party B for short)

In order to standardize product trading behavior and protect the legitimate rights and interests of both parties, the rights and obligations of both parties are clarified in accordance with the Contract Law of the People's Republic of China and relevant laws and regulations.

1. Product supply requirements: product name, specification, grade, quantity (t), unit price (yuan /T), total price Remarks

Total RMB amount (in words) (Note: the unit price in this table refers to the price of sand and gravel delivered to the delivery place)

2. Time, place and method of delivery:

1. Project name: Delivery (pick-up) method:

5. Delivery (pick-up) time and quantity:

6. After Party B arrives at the delivery place, Party A shall provide the stacking area and do a good job of acceptance.

7. Other agreements:

III. Settlement and payment methods:

1. Settlement method: both parties to the transaction can settle through the bank account of the sub-center.

2. Payment method and time limit:

(1) Party A pays% after the contract is signed by both parties; Party A pays% after Party B supplies%; Party A pays% after Party B supplies%.

(2) Party A shall pay off the payment within one month after Party B's supply ends.

(3) Other agreements:

IV. Technical requirements:

1. Party B shall supply products in strict accordance with product standards (production), and the special requirements beyond product technical standards shall be decided by both parties through consultation and clearly written in column 3.

2. party b shall provide the quality inspection report with each batch of products according to the national standards.

3. Other requirements:

V. Acceptance criteria, methods and time limit for raising objections:

1. Party B shall submit the Quality Inspection Report of this batch of products to Party A at the same time of delivery.

2. the acceptance standard is the national standard of the product, or the industry standard or the enterprise standard that has been filed by the competent department if there is no national standard.

3. Appearance quality and quantity shall be accepted on site. If quality problems are found, they should be reported to the quality management department of Shanghai building materials industry quality management center or sub-center within 24 hours. This batch of products must be sealed and cannot be used before the problem is found out. The losses suffered by Party A through no fault of its own shall be borne by Party B according to the liability for breach of contract.

VI. In any of the following circumstances, the contract can be dissolved:

1. Both parties reach an agreement through consultation;

2. The purpose of the contract cannot be achieved due to force majeure;

3. Before the expiration of the performance period, one party explicitly indicated or indicated by its own behavior that it would not perform its main obligations:

4. One party delayed the performance of its main obligations and failed to perform them within days after being urged:

5. One party delayed the performance of its obligations or committed other breach of contract, which made it impossible to achieve the purpose of the contract.

VII. Liability for breach of contract:

1. Party A and Party B shall strictly perform all the clauses stipulated in the contract. If one party breaches the contract, the breaching party shall bear the responsibility and compensate the economic losses with reference to the Contract Law and relevant clauses agreed by both parties.

2. because the quality does not conform to the agreement, party a may request replacement or return, and replacement shall be deemed as overdue delivery, and return shall be deemed as undeliverable.

VIII. Ways to resolve contract disputes:

In case of disputes arising from this contract, Party A and Party B shall settle them through friendly negotiation; If negotiation fails, it can be submitted to the sub-center for mediation. If mediation fails, it can bring a lawsuit to the people's court of the place where the contract is signed.

IX. Force Majeure:

1. If the contract cannot be performed due to force majeure, it shall be exempted from the liability for breach of contract, but the other party must be informed in time and proof shall be provided within the contract period.

2. Others:

X. Other agreed matters:

XI. Matters not covered in this contract shall be settled by both parties through negotiation.

XII. Signing of the contract:

This contract shall come into effect after being signed by representatives of both parties and sealed by both parties; If it needs to be authenticated by the industrial and commercial bureau, it will take effect after signing.

2. Signing place of this contract:

3. This contract is made in duplicate, with Party A and Party B holding one copy respectively, and the sand and gravel sub-center of Shanghai Construction Engineering Trading Management Center keeping one copy for the record. In case of verification, the verification organ holds two copies.

the model product purchase and sale contract is simple 2

Party A (buyer):

Party B (seller):

According to the Contract Law of the People's Republic of China and other laws and regulations, on the basis of equality, voluntariness and consensus, The following terms and conditions are reached with regard to Party A's purchase of Party B's products:

Article 1 List of products and expenses provided by Party B

Serial number Product name, specification, model and quantity Unit price (yuan) Amount (yuan)

Total amount in figures: yuan in words: yuan only

Remarks

Article 2 Payment method: payment in advance. After the goods are accepted and Party B issues a formal invoice, Party A will pay the remaining amount.

article 3 delivery date: arrive at the place designated by party a within days from the date of receiving the advance payment from party a.

article 4: delivery place, expense bearing and ownership transfer: party b shall deliver the goods to the place designated by party a through logistics, and the freight shall be borne by party b; The ownership of the goods shall be transferred from the date of receipt by Party A, and the damage to the products in transit shall be borne by Party B..

article 5 party b shall package the products suitable for logistics and transportation, and attach a cargo list (stamped with the contract seal) with the goods, indicating the product specifications and quantity in detail, and party a shall accept the goods according to the contents of the cargo list.

article 6 party a may raise objections to product information such as product specifications and quantity within 7 days after receiving the goods, and party b must reply and propose solutions within 3 days, otherwise, party a has the right to return the goods and ask party b to bear all the expenses.

article 7 quality assurance:

1. party b promises that the quality of the products purchased by party a is consistent with the samples provided by party b, and it is normal to have slight differences in taste.

2. All products provided by Party B must meet the quality requirements of the relevant state departments. If there is any quality problem, Party A shall be liable for compensation for the harm and loss caused to Party A..

Article 8 Liability for breach of contract:

During the performance of the contract, if Party B delays the delivery (except for exemption agreed by both parties through consultation), it shall be liable for breach of contract at the rate of 2% of the total contract price for each day of delay.

article 9 settlement of disputes:

all disputes arising from the performance of the contract shall be settled by both parties through friendly negotiation. if negotiation fails, either party may bring a lawsuit to the people's court with jurisdiction for settlement.

Article 1 Entry into force of the contract and others:

1. For matters not covered in this contract, a written supplementary agreement shall be made after consultation between both parties, and the supplementary agreement shall have the same legal effect as this contract.

2. this contract is made in quadruplicate, with each party holding two copies, all of which have the same legal effect.

3. this contract shall come into effect from the date when the authorized representatives of both parties sign, the unit seals and the advance payment reaches the account designated by party B ..

party a: (seal) party b: (seal)

legal representative (signature): legal representative (signature):

tel:

bank of deposit: bank of deposit:

account number:

signing date:

model product purchase and sale contract. _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ (hereinafter referred to as Party A) and _ _ _ _ _ _ _ _ _ _ _ (hereinafter referred to as Party B) on _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _.

article 1 list of products and expenses provided by party b

product name

model specification

quantity

unit price (yuan)

total amount (yuan)

total amount (in words)

article 2 packaging: Party B shall pack according to national standards. Any loss caused by poor packaging shall be borne by Party B..

article 3 delivery date: _ _ _ _ _ days from the effective date of this contract to the date of acceptance.

article 4 place and method of delivery

1. place of delivery: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _.

2. Delivery method: Party B will transport the goods to the destination designated by Party A.. Party B is responsible for handling all matters including insurance and storage when the goods are transported to the destination designated by Party A, and relevant expenses have been included in the total contract price.

article 5 mode of payment

1. after this contract comes into effect, party a shall pay _ _ _% of the total contract price to party b as an advance payment within _ _ _ working days;

2. after party a's acceptance of the products provided by party b is qualified, party b will issue the full sales invoice of the total contract price, and party a will pay the full balance of this contract within _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _.

article 6 quality assurance and after-sales service

1. party b promises that the quality of the products provided by party a is traceable, and the product quality guarantee period is _ _ _ _ _ _ _ _ days, counting from the date of delivery.

2. During the product quality guarantee period, if there is any product quality problem, Party A has the right to ask Party B to repair or replace it free of charge at any time; If Party A's personnel are not properly used, Party B shall also provide maintenance services in time, but Party A shall bear the travel expenses and material costs of Party B's personnel.

article 7 modification of the contract

any modification or amendment to the terms of this contract must be signed by both parties in writing. The changed content has the same legal effect as this contract (except the modified part).

article 8 liability for breach of contract

during the performance of the contract, unless both parties agree to be exempted through negotiation, () both parties shall be liable for breach of contract at _ _ _% of the date of non-delivery/non-payment of the contract price

article 9 settlement of disputes

all disputes arising from the implementation of the contract or related to the contract shall be settled through friendly negotiation between both parties. If no settlement can be reached through friendly negotiation, all parties may bring a suit in a people's court with jurisdiction.

article 1 contract comes into effect and others

1. this contract shall come into effect after the authorized representatives of both parties sign, the unit seals and the advance payment reaches the account designated by party B ..

2. the original of this contract is in quadruplicate, and each party holds two copies, which have the same legal effect.

3. If there are matters not covered in this contract, both parties shall make supplementary provisions after negotiation, and the supplementary provisions shall have the same effect as this contract.

party a: (seal) _ _ _ _ _ _ _ _? Party b: (seal) _ _ _ _ _ _ _ _ _

authorized representative: _ _ _ _ _ _ _ _ _ _ _? Authorized representative: _ _ _ _ _ _ _ _ _ _ _ _

Legal representative: _ _ _ _ _ _ _ _ _ _ _? Legal representative: _ _ _ _ _ _ _ _ _ _ _

Mailing address: _ _ _ _ _ _ _ _ _ _ _ _ _? Mailing address: _ _ _ _ _ _ _ _ _ _ _ _

Tel: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _? Tel: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

Fax: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _? Fax: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

Bank: _ _ _ _ _ _ _ _ _ _ _ _ _ _? Bank of deposit: _ _ _ _ _ _ _ _ _ _ _ _

Account number: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _? Account number: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

Model product purchase and sale contract 4

Party A: contract number:

Party B: signing date:

1. Product name, trademark, model, quantity and amount. See the attached table for details.

serial number name brand specification quantity unit price amount arrival date

total (RMB): (including _% VAT invoice) RMB

II. Technical standards for quality requirements: Party B shall produce according to the technical drawings provided by Party A, and the quality shall meet the industry standards. In case of quality problems, Party B shall be responsible for replacing them free of charge and ensure that the replaced new products are in place within _ working days.

iii. Time and place of delivery: See the above table for details. Party B will deliver the goods to the place designated by Party A, and Party A will bear the freight.

iv. payment method and time limit: after party a receives the goods and passes the inspection, the accumulated payment is more than _ yuan, and party b issues _% value-added tax invoice, and party a pays off the payment.

v. quality problems and time limit: if there are any quality problems, Party A shall raise them with Party B within fifteen working days after receiving Party B's products, and Party B will unconditionally return or exchange the devices with quality problems.

VI. Liability for breach of contract:

1. If Party A fails to pay the payment on time, it shall pay a penalty of _% of the total amount of the delayed payment to Party B for each day of delay.

2. if party b fails to deliver the goods on time, it shall pay a penalty of _% of the total payment for the delayed delivery for each day.

VII. Ways to settle contract disputes:

In case of any dispute during the performance of this contract, both parties shall settle it through friendly negotiation. If negotiation fails, they may apply to the Arbitration Commission for arbitration or directly bring a lawsuit in the people's court where Party A is located.

VIII. This contract is made in duplicate, one for each party, and it will come into effect as of the date when both parties seal it. The faxed copy has the same legal effect as the original contract.

party a: party b:

company address:

entrusted agent:

telephone:

fax:

product purchase and sale contract template is simple 5

seller: _ _ _ _ _ _ (hereinafter referred to as party a) <

time of signing the contract: _ _ _ _ _ _ _ _ _ _ _

place of signing the contract: _ _ _ _ _ _ _ _ _ _

article 1 the terms and conditions of this contract must be fulfilled after negotiation between the buyer and the seller. For specific categories (species), it is necessary to sign a purchase order and take it as an annex to this purchase and sale contract; Matters not covered in this contract can be supplemented by both parties through consultation.