Miller Goodman has two puzzles: Facemaker magic face and Shapermaker shape puzzle. These two models are available in normal size and mini size. According to Mama L's analysis, the normal size uses 25 4 cm cubes, and the mini size uses 25 2.5 cm cubes.
Magic face
Shape puzzle
Of the two models, mother L prefers the color of Shapermaker's shape puzzle, so she chose this DIY. Because 65,438+000 cubic logs were made before, they were made of 3 cm cubes.
Determined to DIY this model, mother L began to study it, because Shapermaker officially announced 25 pictures.
25 pictures
The cracking of 25 pictures was wrong the first night, and the plan was determined the next night, and then it was implemented. It was not until the third night that the crack was completely completed.
The first night, I found it was a waste of time. After searching on WeChat Weibo, Mom L found that two Ma Ma exposed this DIY picture, but according to my observation, it should be impossible to spell out 25 pairs, and I didn't get any reply after leaving a message with two Ma Ma.
It took me nearly 12 hours to solve the puzzle and 48 hours to make it, and finally I finished this puzzle.
Reticular crack
Mother l thinks the biggest gain of this set of building blocks is the cracking method that mother l thought of.
It is estimated that mother L can think of a solution the next night, and it is correct in practice, thanks to the recent research on the enlightenment of big L mathematics, which now emphasizes thinking methods more.
L mom crack method:
Step 1: 25 image, 25*25=625 image is segmented by the segmentation tool.
Step 2: Remove the weights manually to ensure that 30 pairs of non-repetitive patterns are used. (This step is really pit)
Step 3: Select 25 pictures from one picture as the pattern of one side of 25 cubes.
Step 4: According to the patterns published on Taobao, determine the patterns of 2-3 faces of more than 20 cubes.
Step 5: Find out the maximum usage of 30 non-repeating patterns in 25 paintings, and then add 25 cube patterns according to the maximum usage of this pattern. For example, the maximum number of patterns 1 is 7, and it is confirmed that there are 2 pairs at present, and 5 patterns 1 need to be added. The supplementary principle is that the six patterns of each cube are not repeated. Usually, to be on the safe side, I will add 1-2 pairs as appropriate (if a pattern is used in more than one drawing), that is, the maximum usage is 7, which may ensure that there are 9 pairs of this pattern, and repeat this action until all 30 non-repetitive drawings are completed. Finally, if there is no pattern on the surface of the cube, it will be considered as wood color without pattern.
Then spell out the largest pattern in your mind. For example, the graph of 1 maximum mode is graph 1, and you need to spell it in your mind to adjust the mode until all the graphs of maximum mode are spelled in your mind.
After completing all the above steps, mother l got the first cracked pattern.
L Mom cracked this pattern for the first time.
A column in the figure represents six faces of a cube. )
DIY making
The production of jigsaw puzzles is much more complicated than edges and corners. Mom L watched a lot of jigsaw puzzles before and avoided some pits, but she still made many pits.
Production steps:
Step 1: slightly polish, and be careful not to excessively polish the edges and corners, which will enlarge the flat-fell seam.
Step 2: Draw a log pattern (tools: ruler sleeve, compass, pencil, eraser), and draw all the patterns on the log according to the cracked pattern. Pit: logs are marked with pencils because of what color they are painted, but the pencil color is too heavy, so some marks can't be covered after being painted twice. Later, when you look at other strategies, you can use tools to draw patterns on the computer, then print them on paper and stick them on the building blocks. Now I stick masking paper according to the pattern. This practice is very advanced, and I regret not seeing it earlier.
Step 3: Brush the sealing primer.
Step 4: Stick masking paper (tool: masking paper)
Step 5: Paint for the first time
Step 6: Polishing. Pit: Even with masking paper, the side paint is still easy to get wet, so it needs to be polished off. It is mainly caused by too much edge coating. To avoid this pit, be sure to pay attention to the edge of the textured paper and don't use too much coating.
Step 7: Color for the second time.
Step 8: Finish painting.
? Making flow chart
Verify the adjustment mode
After the first coloring, mother L was worried that the pattern was cracked and verified, and then spelled the following picture for verification. The spelled pictures are all pictures with the largest number of patterns.
There are 1 1 patterns, 1 patterns are mistaken for white due to color difference, 2 patterns are adjusted to red and blue due to wood color, and 2 patterns are switched. Two pairs are caused by misreading the maximum usage, three pairs are caused by pattern errors caused by strategies (some patterns were reserved by 1-2 pairs at that time), 1 pairs are duplicated, and 1 patterns are omitted. Because only the 1 pair is used, the usage is 1, so it doesn't matter if the pattern is misspelled, and three cube patterns need to be adjusted.
The overall error rate is 7.3% =11150, and there is no problem in the verification of the cracking method.
Partial verification mode
?
The renderings are open.
L mom didn't spell out all 25 paintings when she verified them. In order to prevent mistakes, it took more than three hours to spell out all 25 paintings.
Let's find out which pair and which pattern are different from the original. The effect of putting it in the building block frame also appeared. You can find out which couple it is.
25 renderings
Great challenge
Facemaker official map
The original mini model is in 200 yuan, and the normal model is in 300 yuan, and the price is acceptable. If you like this model and have requirements for the effect, you can buy the original one directly.
However, because of the difficulty, people who like DIY are worth challenging.
If you need a DIYShapermaker shape puzzle, you can pay attention to Mom L, send the shape puzzle in Mom L's dialog box, and you will get the cracked pattern of Shapermaker shape puzzle, and make it directly according to the cracked pattern.
If you are interested and need to challenge the crack, send the crack in the L General dialog box, and you will get the crack tool and detailed instructions.