On-site management inspection and evaluation is an effective means of management control. In addition to the daily full-time inspection of on-site full-time personnel, on-site inspection and assessment can be carried out at different levels, in stages, regularly or irregularly. For example, the on-site project management department can check once a week and communicate in the form of regular meetings; Grassroots construction enterprises can be carried out once a month; The company of the construction unit can carry out it once every quarter; The head office or group-level leaders can conduct it once every six months. When necessary, should organize the inspection of special problems. Because the field management involves a large area and a wide range, the problems detected are often not solved by one department. Therefore, some enterprises combine on-site management with quality management and safety management to conduct comprehensive inspection, which can not only save time, but also become a comprehensive evaluation, which is also a working method. I. Purpose of assessment The purpose of the on-site management examination is to find problems and sum up experience. For the problems found in the on-site inspection, a rectification notice or a nonconformity notice shall be issued. The departments or units with problems are required to analyze the original difficulties of the problems first, take corrective measures, and the department that issued the rectification notice or unqualified notice will review whether it has been rectified. The good experience of site management should be summarized and popularized in time. 2. The assessment contents of on-site management are roughly divided into: equipment management, health management, life management, on-site plane management, and some also include quality management. The assessment scores are all based on the percentage system. Three. Assessment methods for on-site management assessment, all localities have relatively mature experience. The following are the assessment standards of a city: Chapter I General Provisions 1. 1 This standard is formulated in combination with the specific conditions of our city in order to further strengthen the construction site management of construction enterprises, comprehensively promote the standardization of construction sites and effectively promote the basic management of enterprises. 1.2 this standard is prepared in accordance with relevant national laws, decrees, regulations and relevant operating procedures. 1.3 The competent department of the construction enterprise shall take this standard as the assessment basis when assessing the basic management and on-site management level of the enterprise and selecting civilized construction enterprises and civilized construction sites. 1.4 This standard is applicable to all construction sites in Tianjin. Chapter II Evaluation Method and Scoring 2. 1 Evaluation Method 2. 1. 1 The evaluation of "civilized construction site" should be based on standards, scored and summarized according to the sub-items of standards. 2. 1.2 this standard is divided into ten sub-items according to "three clean-ups, six good and one guarantee". The percentage system shall be adopted for each sub-inspection. When scoring, it shall be converted into standard score according to the requirements in the table, and the comprehensive standard score shall prevail after summary. 2. 1.3 methods such as impression, actual measurement, and access to relevant information are used in the inspection. 2. 1.4 The highest penalty for this project is due score. 2. 1.5 If there is any missing item, it shall be calculated according to the following formula:

2.2 classification of "civilized construction site" 2.2. 1 "civilized construction site" can be rated as "civilized construction site", "bureau-level civilized construction site", "municipal civilized construction site" and "unqualified construction site" according to comprehensive standards. 2.2.2 "Civilized construction site": the comprehensive standard score is above 70 (including 70 points), and the scores of the two sub-items of excellent project quality and excellent safety production are above 70 (including 70 points). 2.2.3 "Bureau-level civilized construction site": a "civilized construction site" with a comprehensive standard score of 85 or above. 2.2.4 "Municipal civilized construction site": a "civilized construction site" with a construction area of over 3,000 square meters or a cost of over 6,543.8+200,000 yuan, and a comprehensive standard score of over 90 points (inclusive). 2.2.5 "Unqualified construction site": the comprehensive standard score is below 70, or the score of either of the two sub-items of excellent project quality and safe production is below 70. 2.3 Organization Evaluation 2.3. 1 This standard is an important basis for strengthening the management of construction sites of construction projects. All relevant units and individuals engaged in construction activities in this Municipality must abide by this standard. 2.3.2 Conduct the appraisal of "civilized construction site" once a year. 2.3.3 "Civilized construction site" shall be inspected and approved by the superior competent department on the basis of self-inspection and self-evaluation of the enterprise. 2.3.4 "bureau-level civilized construction site". The construction industry under the authority of each construction industry shall be evaluated by the authority. The construction enterprises owned by the districts and counties shall be assessed by the district and county construction committees. Each industrial bureau is a construction enterprise, which is evaluated by the superior competent department (bureau level). Suburban construction enterprises are evaluated by suburban construction management stations. The central construction enterprises in Tianjin are evaluated by the competent bureau-level units. Foreign independent contracting construction enterprises in Tianjin shall be evaluated by the municipal foreign construction team management station. 2.3.5 "municipal civilized construction site". From "bureau-level civilized construction site",-recommended by the competent department and approved by the Municipal Construction Committee. Chapter III Standards for Civilized Construction Sites 3. 1 Main Contents: Sanqing, Liuhao and Yibao. That is, site cleaning, material cleaning and operation surface cleaning; Good professional ethics, good project quality, good consumption reduction, good safety in production, good task completion and good life for employees; Ensure the use of functions. 3.2 site cleaning 3.2. 1 enclosure facilities must be set up at the construction site. Fences should be safe, firm and effective. Highly consistent. In the scenic spots, busy areas and main streets of the construction site enclosure shall not be unsightly. Scaffolding along the street should be equipped with corresponding enclosure facilities. The construction site must be equipped with a gate with five obvious signs, namely: project overview board (indicating the project name, building area, structural form, opening and completion date, construction unit, design unit, construction unit, etc.). ); Construction management network card (indicate the person in charge of construction, technology, quality, safety, equipment, etc. ); General layout of the construction site; Safety publicity board (safety warning board, safety production and fire control system); Civilized construction measures card. All construction materials temporarily stored in Grandpa's * * construction site on the construction site shall be packed neatly and conform to relevant regulations. For granular and fluid materials, enclosures must be set, the enclosure height shall not be less than 0.5m, and must be covered with lime to prevent flying. 3.2.2 The construction site should be smooth and clean, the engineering garbage should be cleared in time, and the road should be solid and smooth. 3.2.3 Temporary water supply and drainage facilities shall meet the use requirements, and there shall be no water leakage or leakage. Construction sewage should be recycled or discharged up to standard. Don't pollute the scene. Dangerous drains and wells must be clearly marked and equipped with night protection facilities. 3.2.4 There are slogans to publicize the Party's principles and policies, boost morale, ensure project quality, pay attention to safety, fire control and civilized construction. 3.3 Material clarity 3.3. 1 Construction material stacking area, mechanical equipment storage area, machine and vehicle parking area, component processing area, living office area, warehouse, etc. Regional signs and responsible persons shall be clearly set according to the layout of the construction site. 3.3.2 Bricks and tiles shall be packed in rows. Building materials such as blocks should be piled up in a square way. Break it apart, clean it while using it, and leave no bottom. Bulk materials such as sand and gravel should be piled up and not mixed; The material yard should be flat and solid, and the bottom of the material should be used at any time. 3.3.3 Stockpile cement should have stow-wood, and the warehouse should not leak. Be sure to cover it when storing in the open air, and there can be no loose bags. Bulk cement has no fly ash and no moisture deterioration. 3.3.4 The placement of finished products, semi-finished products, materials and components shall meet the requirements and be neat. Should be moistureproof, rainproof and moistureproof measures should be taken, and flooding is not allowed. 3.3.5 Large tools should be strictly managed and distributed by classification and coding. Fasteners and accessories should be cleaned up in time after use and kept in stock. 3.4 Operation surface cleaning 3.4. 1 The construction operation area is clear and the person responsible for cleaning is clear. Clean up the site after work, recover or clean the landing materials in time, and keep the working face clean. 3.4.2 Transport machines and tools must be tight, and roads should be kept clean at all times. Machines and vehicles should be well maintained, scrubbed clean after use and stored in designated places. 3.4.3 Before the mixing station, a drainage ditch must be set up, and a backwater pool or seepage well should be set up, which should be cleaned frequently and kept unblocked. There is no mess backstage, and there is no pulp before and after. 3.4.4 Mixers, mortar machines, hoists, generators, air compressors and electric welding machines must be provided with temporary sheds. Other electric machinery should also take effective sun protection and rain protection measures to keep the mechanical and electrical equipment clean at any time. 3.4.5 The processing operation surface should be kept clean, and the waste materials such as sawdust, shavings, sawdust and short steel bars should be cleared in time. There is no garbage and sundries on site, and the finished products are packed neatly. 3.5 Good professional ethics 3.5. 1 The construction unit shall seriously abide by the national policies and regulations, strictly implement the relevant provisions of the construction market management, abide by the contract, and are not allowed to recruit or hire indiscriminately. 3.5.2 Project management personnel shall unite and cooperate, abide by their duties, strictly manage, be fair and honest, work closely with the construction unit, coordinate the relationship with local residents, consciously accept the supervision of the masses, have a good democratic style, and have a record of soliciting opinions. 3.5.3 Strengthen the ideological and political work of employees, educate employees to establish the idea of "four haves" and serving the people, and make it regular and institutionalized with educational records. 3.5.4 Employees have excellent work style, unity and cooperation. There is no barbaric construction. No fighting, no gambling, no stealing. 3.5.5 party member and the League members should play an exemplary role, cultivate a new style, and earnestly do a good job in civilized construction. 3.5.6 Formulate civilized construction measures such as not disturbing the people, protecting the environment and protecting cultural relics. 3.6 Excellent engineering quality 3.6. 1 Establish and improve a complete quality assurance system. Formulate clear quality management objectives and quality management measures, conscientiously implement the "three inspections" system of self-inspection, mutual inspection and handover inspection, and insist on guiding construction with samples. 3.6.2 Carry out the construction in strict accordance with the operation process and design drawings, and do not cut corners. All the test data are accurate, true and complete, meet the design requirements, and there are no major quality accidents. 3.6.3 Unqualified finished products, semi-finished products and building materials are strictly prohibited. 3.6.4 In strict accordance with the acceptance standard of construction quality, timely and accurately evaluate the quality of each division and sub-project and fill in the engineering technical management data. According to the national quality acceptance standard, the qualified rate of subdivisional work is 100%. 3.6.5 Actively carry out total quality management activities. The project selection of the quality management team is accurate, and it can be applied correctly in the construction and achieved results, which has accumulated some experience for the project quality management. 3.7 Consumption reduction 3.7. 1 Establish and improve the management system of labor, materials and machinery, with clear consumption reduction indicators and guarantee measures, which can be decomposed and implemented in engineering parts and posts, and establish a recycling and saving account. 3.7.2 Before the construction of the main materials, there is a comparison of "two calculations" (design budget and construction budget), and the material acquisition is limited, and the procedures for receiving and returning materials are complete. 3.7.3 Measuring ruler shall be used for sending and receiving construction materials; The accounts are consistent. Strictly implement machinery. Large tool inspection system, complete and accurate daily records. Template pads are strictly prohibited. 3.7.4 Accounting should be in place, and an analysis system of material consumption and saving should be established. After the completion of some projects, quarterly and monthly saving analysis of labor, materials and machinery consumption should be carried out, so as to find that targeted corrective measures should always be formulated after the completion of the project and reflect the cost accounting situation in time. 3.7.5 Strengthen measurement management and do a good job in measuring the receipt, delivery and use of materials. All kinds of measuring instruments must be measured regularly and marked as qualified. 3.7.6 Construction shall be carried out in strict accordance with the design requirements, so as to achieve "four no-exceeding" (super-high, super-long, super-thick and super-strong). 3.8 Safety in production 3.8. 1 Establish and improve the safety production management system and safety production responsibility system, with clear safety production control instructions. According to the characteristics of this project, safety technical measures are formulated, and disclosure is made according to the partial items with complete procedures. 3.8.2 Earnestly implement the grading standard of construction safety inspection of the Ministry of Construction, and it must reach the qualified standard or above. 3.8.3 Establish daily safety inspection. Regular inspection system, rectification should be fixed, fixed measures, and recorded. Special types of work must be certified, and unlicensed personnel are prohibited from operating. 3.8.4 Seriously do a good job in the "three-level" education, pre-shift education and safety training of production safety. 3.8.5 According to the principle of "who is in charge, who is responsible", establish a fire control system. Sign letters of responsibility at different levels, equip firefighters, and implement the organization, personnel and system. 3.8.6 Conduct regular fire control and safety education for employees entering the site. Fire protection personnel and personnel in key positions must have "three understandings and three skills" (know the fire danger in their own production, know the safety measures to prevent fire, and know the fire extinguishing methods; Can call the police, can use fire extinguishers, can save and deal with accidents. 3.8.7 Flammable, explosive and other dangerous goods should be kept by special personnel, specially stocked, and the warehouse meets the requirements, with strict procedures for receiving and returning materials and examination and approval system. 3.8.8 The construction of the on-site supervision room shall comply with the fire prevention regulations. Electrical wiring and erection meet the requirements, and low-voltage wiring is used for dormitory lighting. The fire escape is unblocked and the width is not less than 3.5 meters. 3.8.9 The construction site must be equipped with sufficient fire-fighting equipment, which should be maintained frequently to ensure that it is sensitive, effective and reasonable. Warning signs must be set up in no-smoking areas. 3.9 Complete the task 3.9. 1 The construction site must prepare the approved construction organization design, organize the construction scientifically, and ensure that the project is completed on schedule. 3.9.2 Warranty data and construction records of construction projects. Test records (reports), hidden inspection records, quality evaluation, as-built drawings and other management information are detailed and complete, which provides an accurate basis for project acceptance and future building modification, expansion and maintenance. 3.9.3 According to the construction progress, analyze the progress regularly and take corresponding measures to ensure the construction progress. 3.9.4 The actual completion progress of key projects shall not be less than 95% of the planned requirements, and the actual completion progress of general projects shall not be less than 90% of the construction progress plan. 3. 10 A better life for employees 3. 10. 1 Establish a life management and health management system. Implement measures for heatstroke prevention, cooling, cold prevention and warmth retention. 3. 10.2 The temporary dormitory in the living area should be clean, windproof and rainproof, with complete doors and windows, and mosquito and fly prevention facilities in summer. 3. 10.3 The site should be equipped with canteen (food delivery equipment), drinking water equipment, bathing (toilet) facilities, lounge, dressing room (box), health station (box), toilet, etc. Bicycle sheds and clubs can be built if conditions permit. 3. 10.4 do a good job in disease prevention and epidemic prevention, strengthen food hygiene management, keep the living and office areas clean, remove domestic garbage in time, clean the canteen to prevent rats, and have mosquito and fly prevention facilities. 3. 10.5 Toilets on the construction site should be covered tightly, and feces should be removed in time. 3. 1 1 guarantee function 3. 1 1. 1 clean-clean. Engineering waste soil and construction surplus materials should be thoroughly removed, and indoor and outdoor should be cleaned, painted and decorated with bright colors and no pollution. 3. The end of11.2 is complete. Strengthen the protection of finished products to ensure that building products are intact. 3. 1 1.3 Ping-Ping. The ground and wall are solid and flat, without hollowing. The skirting board and dado are consistent in height and thickness, and the top line is straight. 3. 1 1.4 Qi-complete. Sanitary ware, equipment and embedded parts meet the design requirements. 3. 1 1.5 is firm. All installation and embedded parts meet the design requirements. 3. 1 1.6 Tightness-door and window frames are straight, joints are tightly plugged, doors and windows are closed, doors and windows are flexible to open, and the roof is tightly sealed. 3. 1 1.7 "Four links and one light"-no water running from the upper water supply, no leakage from the lower water supply, no smoke from the flue and no leakage from the lighting lamp. 3. 1 1.8 Safety and convenience-stair handrails are firm and safe, with consistent step height, and building products can be safely used.

For more information about project/service/procurement bidding, and to improve the winning rate, please click on the bottom of official website Customer Service for free consultation:/#/? source=bdzd