1) If you want to build other servers in the LAN, you only need to refer to the third point of question 3 to build a virtual server.

2) If you want to build a Web server, if the service port of the Web is the same as the default port of the router's Web management interface, and both ports are 80, it will cause conflicts. The solution here is to change the port of the router's Web management interface. The specific operation is as follows: Log in to the router management interface, select menu Security Settings → Remote WEB Management, and enter a value other than 80 in the "WEB Management Port" column, such as 88. Then click Save and restart the router.

note:

If you want to log in to the router management interface again, you need to enter the IP address and management port number of the router WAN port in the address bar of the browser. The input form is http://61.141.186.224: 88 (assuming that the IP address of the router WAN port is 6 1. 148).

3) Log in to the router management interface, select the menu Forwarding Rules → Virtual Server, and click the Add New Item button. In the following interface,

Set the service port to "80" in, which is the connection port of the Web server; Then fill in the IP address of the Web server in the IP address bar (assuming that the IP address of the Web server you specified is192.5438+068.6438+0.105438+0); Finally, select Enable in the status bar and click the Save button.