First, earnestly implement it? Safety first, prevention first? Policies and national laws and regulations on safety in production, formulate safety management system and safety operation rules of various types of work and mechanical and electrical equipment suitable for the unit, and regularly check the implementation of the system.

Two, in accordance with the requirements of the "production safety law" to set up a leading body of production safety management, production departments and teams should be equipped with full-time (part-time) safety management personnel, responsible for supervising, educating and checking employees to implement safety operation procedures.

Three, regular production safety education and safety knowledge training, education workers strictly implement each type of work process, process specifications and safety operation procedures, shall not be illegal operation.

Four, vehicle maintenance, the vehicle should be parked, and firmly installed before operation. The lifting equipment should be operated by special personnel, and non-working personnel are not allowed to get under the car. When lifting the car, it is not allowed to repair the lifting equipment.

Five, the road test vehicle must be carried out by a driver with a driver's license and skilled drivers, and in the designated sections.

Six, toxic, flammable, explosive and chemicals, dust, corrosive agents, pollutants, pressure vessels and other safety protection measures and facilities, pressure vessels and instruments should be carried out regularly in strict accordance with the requirements of relevant departments.

Seven, according to the seasonal changes in fire prevention, flood control, anti-freezing, anti-corrosion and anti-theft work, and formulate relevant measures, equipped with fire fighting equipment. Power distribution facilities and lines should be in good condition and reliable in performance, and the use of mobile appliances should have safety protection measures.

Eight, the accident should be reported to the superior in time, protect the scene, find out the reason, and properly handle it.

Workshop safety notification model

In order to do a good job in the safety management of production workshops and prevent and control the occurrence of workshop safety accidents, this system is specially formulated, and all workshops are required to comply with it:

1. On-site production personnel shall operate in strict accordance with production operation specifications.

2. It is forbidden to work in the workshop after drinking, and it is forbidden to arrange sick employees to work, and resolutely avoid safety accidents.

3. Be sure to wear labor protection articles before going to work, don't wear a helmet, and don't go to work.

4. Before starting the machine, the machine must be inspected, and it can be started only after it is confirmed that there is no abnormality, and the starting sequence must be strictly followed, and the formal production operation can be started only after it is confirmed that the machine is running normally.

5. During each shift, if there are abnormal conditions such as abnormal sound and poor operation, you should immediately stop the machine for inspection or ask professional maintenance personnel to repair it, so as to prevent major equipment damage accidents or product quality accidents, and you must not shirk your responsibilities and delay production.

6. Electrical lines shall not be moved or overlapped without authorization. If it is found that the circuit wires are exposed or damaged, it should be reported in time and repaired by a full-time electrician.

7. Pit materials should be cleaned regularly, and heavy machinery and equipment should be maintained and cleaned regularly to ensure normal operation and strengthen safety precautions.

8. All dust removal equipment in the workshop should be cleaned in time, and the pulse valve should be opened to ensure that all pipes of the dust collector are unblocked and do not leak dust.

9. Regularly check the lubrication V-belt of each equipment, fill and replace the easily worn pad in time to ensure the safe operation of the equipment.

10. Fireworks, fights and disturbances are strictly prohibited in the production area.

1 1. When the crane is used to lift materials, it is forbidden to have people under the hook and pull the crane.

12. Organize employees to carry out "safety production knowledge" training and practical training on the use of fire fighting equipment on a regular basis.

13. For new employees who are newly recruited into the factory, pre-job training and safety production knowledge training must be carried out before taking up their posts, and they can only take up their posts if they are qualified.

Workshop Safety Notice Fan Wensan

Each seminar:

When winter comes, cold and dry can easily lead to all kinds of accidents. In order to do a good job in the safety production of our company, avoid accidents and ensure the safety and health of employees; Ensure the smooth completion of all tasks of the company. Please do the following work carefully:

1. Conduct a safety inspection on each workshop, and rectify in time if major hidden dangers are found. If it cannot be rectified in time, report to the company's safety committee in time, assign special personnel to monitor and rectify within a time limit.

2. Each workshop should strengthen management and implement responsibilities according to the requirements of the responsibility system for production safety. Teams and employees shall be responsible for the safety production of their teams and posts. Everything must be managed by someone, with a clear division of labor and responsibilities in place.

3. The workshop should investigate the electric equipment such as welding machine in use, clean and tidy all kinds of electrical cabinets (boxes), and take targeted preventive measures. Strengthen the management of electricity consumption, advocate saving electricity, and make everyone cut off electricity. Never put electrical facilities (such as water heater, air conditioner, oven, computer, etc. ) stand by, but really cut off the power. At the same time, take anti-freezing measures for the equipment in this workshop to prevent the equipment from freezing and affecting production.

4. Strictly control the purchase and use of all kinds of electric heaters. It is forbidden to use electric furnaces and far-infrared heating plates for heating. The heating equipment that really needs to be used in production should be used at designated points, and the person in charge should be appointed. Offenders will be punished according to factory regulations.

5. For dangerous chemicals (inflammable and explosive; Toxic and harmful; Strong corrosive) transportation, use and storage to strengthen management. It is necessary to set up a good account.

6. Anti-skid measures should be taken for the parts that are easy to freeze in the production site of this workshop. If the workshop can't solve it, it should be reported to the safety Committee for solution.

7. The fire-fighting equipment in this workshop shall be inspected and maintained by special personnel, and the problems found shall be reported to the safety committee in time to ensure that the fire-fighting equipment is in good condition. It is forbidden to pile up articles in front of fire fighting equipment, and the fire escape should be kept clear, and artificial blockage is forbidden.

8. When using naked flame, the hot work approval system must be strictly implemented, and safety precautions should be taken carefully before hot work to monitor the hot work site.

9. It is windy and dry in winter, so it is necessary to educate and urge employees to strictly abide by the smoking system in the factory.

10. The low temperature in winter makes people sleepy, especially working overtime at night, which increases the potential safety hazard and reduces the production quality. Therefore, each workshop must strengthen inspection and education to ensure smooth production.

?