Question 2: Where is the network cable plugged into the router? Now that you have a router, you can plug your notebook directly into any of the four LAN interfaces behind the router, without setting an online account and password. If there is a wireless router, the laptop can surf the Internet directly through wireless.
Question 3: Which port on the cat connects the network cable to the router, and then which port does the network cable plug into? The network cable of the cat is connected to the wan port of the router, and the desktop is connected to the lan port of the router with the network cable. 1234 is arbitrary.
Question 4: Which port is the wireless router network cable connected to? The network cable of this wireless router has been plugged into the wan and can be used.
You also need to set up the router and log in to pppoe directly in the setup wizard.
Also, when the router is not easy to use, you can try to use the latest Tencent National wifi.
I think this portable wifi is quite good, and the signal is better than other portable wifi.
There are also many functions. The mobile phone can scan the QR code to connect to wifi and surf the Internet directly without entering the wifi password.
The function of preventing the acceleration of internet access and online games is very powerful. You can go online to see the usage.
I hope my answer will help you and be adopted. Thank you.
Question 5: I don't know which port the broadband network cable connects to the router.
Question 6: Which is the hole for inserting wfi and which is the hole for inserting network cable on the router? How many holes are there in your route?
Question 7: How to plug in the network cable of the router? Which interface to plug in for 20 minutes? Please pay attention to the interface on the router. Usually, one uplink port is marked with a different color, and other interfaces are the same. Uplink ports are usually used to connect to higher-level networks, such as the network cable from ADSL cat, and other interfaces of the router are used to connect computers. If it helps you, please adopt it. Thank you.
Question 8: Can the network port of the community be directly connected to the router? If the network cable directly enters the home, you can only judge whether your physical connection medium is network cable or telephone line. It is important to determine what connection method you will use after you connect the line. The connection mode mentioned here refers to: there are generally three kinds in China, one is to dynamically obtain the IP address, that is, after you access the network cable, you can automatically obtain the IP address and other information without any settings, and the other is static IP-IF. The third type is PPPOE dialing-you need to dial an established broadband connection before surfing the Internet. After confirmation, you can set up your router. Before setting up, another thing you need to do is to check the domain name system of your telecom company. The method is that you access the network cable, click Start-Run -cmd-ipconfig/all, and use this command to check your IP address, DNS and other information: as follows.
C:\ documents and settings \ hhh & gtipconfig/ all
Windows IP configuration
Host name. . . . . . . . . . . . :shwl-22a0 176454
Primary Dns suffix. . . . . . . ：
Node type. . . . . . . . . . . . : unknown
IP routing is enabled. . . . . . . . : No.
WINS agent is enabled. . . . . . . . : No.
Ethernet Adapter Local Connection 5:
Connection-specific DNS suffix. ：
Description. . . . . . . . . . . : Realtek RTL8 139 series PCI Fast Ethe
rnet NIC
Physical address. . . . . . . . . :00-E0-4C-85-A9-E5
Dhcp is enabled. . . . . . . . . . . : Yes.
Automatic configuration is enabled. . . . : Yes.
IP address. . . . . . . . . . . . : 192. 168. 123. 100
Subnet mask. . . . . . . . . . . : 255.255.255.0
Default gateway. . . . . . . . . : 192. 168. 123.254
DHCP server. . . . . . . . . . . : 192. 168. 123.254
DNS server. . . . . . . . . . . : 202. 102. 152.3
202. 102. 128.68
Time of obtaining the lease: March 8, 2007 16:57:5 1
The lease expires in March 2007, 1 1, 16:57:5 1
Among them, DNS server followed closely. If you use static IP to surf the Internet, it's already ... >>
Question 9: How to connect the network cable separated from the router to the wireless router? Log in to two wireless routes (followed by), and set the WAN as dynamic IP in the setup wizard;
Locate DHCP and shut down this wireless routing service. This service is a dynamic address assignment service. After shutdown, IP will be obtained from the original route.
Question 10: How to set 100 minutes to connect the network cable to the router LAN port? The router is connected to the wireless router, and the second router is set according to the wireless AP mode:
1. First connect the computer to the LAN port of the slave router and change the IP address of the slave router. For example, most router addresses are 192. 168. 1. We just need to change the IP address of the router to192.168.10.
2. Turn off the DHCP function of the slave router in the settings;
3. Finally, connect the network cable of the master router to the LAN port of the slave router (whichever will do), and be careful not to be the WAN port.