You have to get off the soft PPP and brushless machine first.
The versions of 1 and Softick PPP are preferably 2.2 1.
2.Softick PPP 2.2 1 may have inexplicable failures when it is used, so it is best to remove it and reinstall it.
3. Generally, the transmission of JAVA below 1M can be completed in 2-3 minutes. If it exceeds 1m, it is best to cancel the retransmission (provided that JAVA is available normally).
First, install softick ppp software.
During the installation, you will be prompted that there is no USBPORT.dll file. Click OK. After confirmation, the installation process will have two options. Select "use USB port in exclusive mode" to install, and the next installation will be ok. The software registration code is 380A-0 17K-2EJF-2SEF. After the installation is completed, select Resgister softick ppp to complete the registration and use it normally.
Second, set the softick ppp option.
Choose to start softick ppp running software, turn on usb option, and choose to use usb in exclusive mode, which is also the default option. If your data cable and computer are not connected correctly, you can't see USB port in Bluetooth/serial port option, only com 1 and com2 can be seen. At this time, put the mouse on the softick ppp icon in the lower right corner of the taskbar, and you will be prompted that there is no device connected to ppp software. At this time, you need to connect your usb cable correctly. In the options of control panel-printers and other hardware-telephone and modem, you can see Samsung mobile USB modem 1.0 and its corresponding com port. After the connection is correct, select the com port corresponding to the USB cable. At this time, the software in the lower right corner also has corresponding tips. Mine is COM7. At this time, it means that the software has found the mobile phone, and this step is completed. When running the software, sometimes the software can't find the mobile phone port when the data cable is connected to the computer correctly. Right-click the software icon in the taskbar, select the icon with a red cross, and then right-click activate PPP to see if the software has recognized the mobile phone port. If not, please disconnect the data cable and reconnect it. Then start softtick PPP 2.21software, and choose to close PPP. At this point, the icon is marked with a red cross, and then right-click to select Activate PPP. You can try it several times. When you choose to activate PPP, a dialog box without USB driver may pop up. Just choose Cancel.
Third, softick ppp is connected to the mobile phone.
Under the condition that the USB data cable is normally connected and Softick PPP software is set, firstly, on the mobile phone:
1, mobile phone application->; JAVA world->; Leave the access point name, user name and password in the settings blank, and set the proxy server to "invalid" (this is necessary, otherwise the phone will crash and there will be no clown screen when restarting).
2. The licensed products are in my collection-> Treasure Box-> Leave the name, user name and password of the access point blank in the settings, and set the proxy server as "invalid" (this must be done, otherwise the mobile phone will crash and restart without a clown screen). First, enter #*536963# on the mobile phone to start java download (only once), and the mobile phone displays: Other disabling of serial JAVA means disabling JAVA networking. Then enter #*5737425# to enter the java download menu. Select the first item "PPP UP" in the menu, that is, 1PPP UP (only once, otherwise the screen will be blank), and then select the second item "USB", that is, 2USB. At this time, there are three connection options, so don't choose the specific option for the time being (USB can only be selected once, and the second selection will inevitably restart the mobile phone, so please pay attention to selecting only once), then open "Samsung JAVA Switch to Free Software", (if you open the software in advance, for example, the mobile phone will crash and restart before selecting "2USB" in the previous step), and click "Join" to switch to Samsung JAVA to Free Software. Just add one, because only one java file can be uploaded at a time. The extension is *. Jad, and click Open (wait a moment, if you choose right away, you will find that there is no java file, so restart). The game will appear in the loading list of JAVA transmission brushless software.
3. Then select "Serial Download" of the mobile phone to see the progress bar and download JAVA normally. If you want to continue downloading, add a JAVA file to the JAVA transmission brush-free machine software, and then type #*5737425# to directly select the second item "serial port download" (note here: directly select the second item "serial port download", do not repeatedly select "PPP UP" and "USB", and the mobile phone will restart if you select it) to download other JAVA.
4. After transmitting the java program to be transmitted, enter #*53696 1# in the mobile phone to close the serial JAVA download. If you don't enter this command, it will be normal to browse WAP for the first time in the future, and it will crash and PIM & The file manager software can't find the port of small D, so it can't be used normally. Remember! After the download is completed, the mobile phone will automatically run the java program you just uploaded. If the uploaded file already exists, the phone will immediately return to the java program list. If the corresponding java program cannot be found, the phone will automatically restart.
Tip:
1, a: the water machine must use a mobile phone -> JAVA world->; The access point name, user name and password in the settings are all left blank, and the proxy server is set to "invalid".
B: licensed products must leave the access point name, user name and password blank in My Collection-> Treasure Box-> Settings, and the proxy server is set to "invalid".
2. Softick PPP software must be set to correctly select the port in Bluetooth/serial option of Softick PPP software.
3. If the first transmission is successful, if you enter #*5737425# when transmitting JAVA again, directly select the second item "serial port download", and do not select "PPP UP" and "USB" again. If you do this, the phone will restart.
Clown screen appears during 4.JAVA transmission, which will crash and then automatically restart. That's because some previous steps were not done correctly, so it will crash and restart. If there is a crash restart, first enter #*53696 1#, then restart the phone, unplug the data cable, close the soft stick PPP software, plug in the data cable first, then open the soft stick PPP software, and start the above steps again.
Mine is D508. It took a long time to get ready. You can ask me if you don't know.