Maintenance plan:

First, regular care:

Equipment and materials used: crystal face machine (weight: about 80KG, rotation speed: about 170 rpm).

Refined stainless steel silk cotton

Yakomei/Acme Crystal Hardener AK 1, AK2

sprinkling can

Vacuum cleaner, etc

Operating steps: 1. Shake well before use.

2. The treated surface must be clean, dry and without any coating.

3. Optimum working temperature: 15-25℃, avoid direct sunlight, and turn off the underground heating system.

4.2-3 ㎡ One treatment.

5. Spray AK 1 0-20 ml/㎡ evenly on the stone surface, and then immediately use a low-speed crystal face machine with refined stainless steel silk cotton for polishing and circulating operation (according to the cross trick). Even after drying, the polishing operation can be continued until the required glossiness is reached, and the operation can be repeated 1-2 times if necessary.

6. The treatment effect of AK 1 can be further enhanced and the gloss can be improved by using Yakemei hard agent AK2.

7. After the operation is completed, any generated dust should be sucked away.

8. You can walk immediately after treatment.

Curing period: according to the situation, it is recommended to be about 2-6 weeks, in order to maintain the crystal face effect and achieve ideal fullness.

Note: Surfaces or objects (such as furniture) that do not need to be treated should be covered or covered.

Metals are easily damaged and discolored by this product.

If the work is interrupted, it must be ensured that there is no contact between the steel wool and the floor.

Even if the cotton pad is changed according to the degree of pollution.

Second, the daily care

Daily nursing work mainly includes removing fine sand and dust brought to the stone floor by walking and windy. Use Yakemi /AKEMI stone cleaning soap to maintain stone.

Materials used: dust pusher, Yakemei stone cleaning soap, bucket, clean water, mop, etc.

1. Floor mats need to be placed at the entrance of the lobby to reduce the dust brought into the room.

2. The cleaning staff should promptly push down the dusty ground to avoid scratching the surface with fine sand.

3. Wet the ground 2-3 times a day according to the situation. During the wet branch, it is necessary to add Jakobe stone cleaning soap to the water (mix with water according to 100: 1).

Purpose of wet branch: 1) Clean up the fine sand and dust that cannot be treated by dust pushing in time;

2) Preserve the stone structure and enhance the stone color.

Summary: If properly handled, the crystal face effect of the stone can be maintained and the surface of the stone can be prevented from being scratched. In the later stage of nursing, in order to prolong the service life of stone as much as possible, we should try to avoid using abrasives such as grinding plates and polishing powder (slurry) for renovation.