Three-level safety education refers to factories, workshops and teams, right? Yes, the three-level safety education refers to the safety education at factory level, workshop level and post (workshop section, team) for new employees and workers, which is the basic form of the safety production education system in factories and mines.
Three-level safety education refers to the workshop team, right? Three-level safety education refers to factory education, workshop education and team education.
Three-level safety education is the basic form of safety production education system in factories and mines. Three-level safety education system is the basic education system of enterprise safety education. Three-level safety education includes factory education, workshop education and team education. Enterprises must carry out factory education, workshop education and team education on safety production for new workers; Workers who change jobs, return to work and adopt new technologies, new processes, new equipment and new materials must be given safety and health education in new posts and new operation methods. Educated people can only operate on their posts after passing the examination.
The three-level safety education content is as follows:
First, the content of factory education:
(1) Explain the significance, task, content and importance of labor protection, and let new employees establish the idea of "safety first" and "everyone is responsible for safety production".
(2) Introduce the general situation of enterprise safety, including the development history of enterprise safety work, the production characteristics of enterprises, the distribution of factory devices (focusing on the precautions of special devices near key parts) and the organization of factory safety production.
(3) Introduce the National Staff Code issued by the State Council, the Labor Law of People's Republic of China (PRC), the Labor Contract Law of People's Republic of China (PRC) and various warning signs and signal devices set in enterprises.
(4) Introduce typical accident cases and lessons of enterprises, common sense of emergency rescue and disaster relief, and reporting procedures of industrial accidents.
Factory-level safety education is generally conducted by the enterprise safety department for 4~ 16 hours. The explanation should be combined with looking at pictures and visiting the labor protection education room, and easy-to-understand legal manuals should be issued.
Second, the workshop education content:
(1) Give an overview of the workshop. For example, the products and technological processes produced in the workshop and their characteristics, personnel structure, organization and activities of safety production, dangerous areas and toxic and harmful posts in the workshop, rules and regulations of labor protection in the workshop, requirements and precautions for wearing labor protection articles, accident-prone parts and reasons in the workshop, special regulations and safety requirements, introduction of common accidents in the workshop and analysis of typical accident cases, introduction of good deeds in safety production in the workshop and specific practices and requirements for civilized production in the workshop.
(2) Introduce the basic knowledge of safety technology according to the characteristics of the workshop. For example, the cold working workshop is characterized by many metal cutting machines, many electrical equipment, many lifting equipment, many transport vehicles, many kinds of oil products, many production personnel and crowded production sites. The machine tool has high rotating speed and large torque. Workers should be educated to observe labor discipline, wear protective equipment and pay attention to clothing. The woven fabric was stuck by the machine and the hand was scratched by the rotating knife. Workers should be informed to avoid collision, extrusion and cutting when clamping, inspecting, disassembling and transporting workpieces, especially large workpieces; Adjust the clamping tool, measure the workpiece, refuel and adjust the speed of the machine tool. When cleaning the car, cut off the power supply and hang warning signs. When cleaning iron filings, you should not pull them by hand, but use hooks. The workplace should be kept clean and the roads should be smooth; The grinding wheel should be installed correctly, the accessories should meet the requirements and specifications, the gap between the grinding wheel surface and the bracket should not be too large, and the operation should not be too hard. The standing position should keep a certain distance and angle from the grinding wheel and wear protective glasses; When processing ultra-long and ultra-high products, there should be safety protection measures. Others such as casting, forging and heat treatment workshops, boiler rooms, power distribution stations, dangerous goods warehouses, oil depots, etc. , should be based on the characteristics of new workers, safety technology education for them.
(3) Introduce the knowledge of workshop fire prevention, including fire prevention policy, the situation of inflammable and explosive articles in the workshop, the key parts and special needs of fire prevention, the location of fire-fighting articles, the efficiency and usage of fire extinguishers, the organization of fire prevention in the workshop, and the treatment methods of fire hazards.
(4) Organize new workers to learn safety production documents and safety operation rules and regulations, and educate new workers to respect teachers, obey orders and work safely. Workshop safety education is the responsibility of the workshop director or safety technicians, and the teaching time is generally 4~8 hours.
Third, the team education content:
(1) The production characteristics, working environment, dangerous areas, equipment conditions and fire-fighting facilities of this team. This paper mainly introduces the high temperature, high pressure, inflammable and explosive, toxic and harmful, corrosion, aerial work and other dangerous factors that may lead to accidents, explains the accident-prone parts of the team, and analyzes the typical accident cases.
(2) Explain the safety operation rules and job responsibilities of this type of work, with the emphasis on always attaching importance to safety production, consciously observing the safety operation rules and not operating illegally; Maintenance and correct use of machines, equipment and tools; This paper introduces the safety inspection and handover system in various safety activities and working environment. Tell new workers about accidents or find hidden dangers, report to leaders in time and take measures.
(3) Explain how to use labor protection articles correctly and the requirements of civilized production. It should be emphasized that gloves are not allowed when the machine tool is rotating, protective glasses should be worn when cutting at high speed, working hats should be worn by female workers when entering the workshop, and safety helmets and safety belts should be worn when entering the construction site and working at heights. The workplace should be clean and tidy, the roads should be smooth, and the articles should be neatly stacked.
(4) Implement safety operation demonstration. Organize old workers who attach importance to safety, skilled and experienced to demonstrate safe operation, and explain while demonstrating, focusing on the essentials of safe operation, and explaining how to operate is dangerous and safe, and the serious consequences will be caused if they do not follow the operating procedures.
Can three-level safety education (company, project department and team) be carried out at the same time in one day? Three-level safety education (company, project department, team) can't be completed in one day, because the regulation of the State Administration of Work Safety is that pre-job training should not be less than 24 hours, and it is impossible to complete 24 hours a day. There are only eight classes a day at most, so it takes at least three days to complete the three-level safety education.
According to Article 15 of the Safety Training Regulations for Production and Business Units promulgated by Order No.3 of the State Administration of Work Safety, the pre-job training time for new employees in production and business units shall not be less than 24 hours. The safety training time for new employees in coal mines, non-coal mines, dangerous chemicals, fireworks and other production and business units shall not be less than 72 hours, and the annual retraining time shall not be less than 20 hours. However, in our actual implementation, there is a phenomenon of "cutting corners" and the education time is seriously insufficient.
Three-level safety education refers to the factory-level safety education, workshop-level safety education and post (section, team) safety education for new employees and workers, which is the basic form of safety production education system in factories and mines. Three-level safety education system is the basic education system of enterprise safety education. Three-level safety education includes factory education, workshop education and team education. Enterprises must carry out factory education, workshop education and team education on safety production for new workers; Workers who change jobs, return to work and adopt new technologies, new processes, new equipment and new materials must receive safety and health education in new posts and new operation methods. Educated people can only be employed if they pass the exam.
What are the three levels of safety education? Three-level safety education refers to factory-level safety education, workshop-level safety education and post safety education for new employees and workers.
1. The main content of workshop safety education: (1) Introduce the general situation of the workshop. For example, the products produced in the workshop, the technological process and its characteristics, and the personnel structure of the workshop.
(2) Introduce the basic knowledge of safety technology according to the characteristics of the workshop. For example, the cold working workshop is characterized by many metal cutting machines, many electrical equipment, many lifting equipment, many transport vehicles, many kinds of oil products, many production personnel and crowded production sites.
(3) Introduce the knowledge of workshop fire prevention, including fire prevention policies, inflammable and explosive articles in the workshop, key fire prevention parts and special fire prevention needs, and the location of fire protection articles.
(4) Organize new workers to learn safety production documents and safety operation rules and regulations, and educate new workers to respect teachers, obey orders and work safely. Workshop safety education is the responsibility of the workshop director or safety technicians, and the teaching time is generally 4~8 hours.
2, the main content of factory safety education:
(1) Explain the significance, task, content and importance of labor protection, and let new employees establish the idea of "safety first" and "everyone is responsible for safety production".
(2) Introduce the general situation of enterprise safety, including the development history of enterprise safety work, the production characteristics of enterprises, the distribution of factory devices and the organization of factory safety production.
(3) Introduce the Code for State Staff, the Regulations on Rewards and Punishment for Employees in Enterprises promulgated by the State Council, and various warning signs and signal devices set in enterprises.
3. The main contents of safety team education:
(1) The production characteristics, working environment, dangerous areas, equipment conditions and fire-fighting facilities of this team. This paper mainly introduces high temperature, high pressure, inflammable and explosive, toxic and harmful, corrosion, aerial work and other dangerous factors that may lead to accidents.
(2) Explain the safety operation rules and job responsibilities of this type of work, with the emphasis on always attaching importance to safety production, consciously observing the safety operation rules and not operating illegally; Take good care of and use machines, equipment and tools correctly. The workplace should be clean and tidy, the roads should be smooth, and the articles should be neatly stacked.
(3) Implement safety operation demonstration. Organize old workers who attach importance to safety, skilled and experienced to demonstrate safe operation, and explain while demonstrating, focusing on the essentials of safe operation, and explaining how to operate is dangerous and safe, and the serious consequences will be caused if they do not follow the operating procedures.
When cleaning the car, cut off the power supply and hang warning signs. When cleaning iron filings, you should not pull them by hand, but use hooks. The grinding wheel should be installed correctly, the accessories should meet the requirements and specifications, the gap between the grinding wheel surface and the bracket should not be too large, and the operation should not be too hard. The standing position should keep a certain distance and angle from the grinding wheel and wear protective glasses; When processing ultra-long and ultra-high products, there should be safety protection measures.
Three-level safety education refers to the factory-level safety education for new employees and workers; Workshop-level safety education and post (workshop section, team) safety education
The three-level safety education system refers to the contents of three-level safety education: factory-level safety education, workshop-level safety education and post safety education.
Three-level safety education refers to the factory-level safety education, workshop-level safety education and post (workshop section, team) safety education for new employees and workers, which is the basic form of safety production education system in factories and mines. Three-level safety education system is the basic education system of enterprise safety education. Three-level safety education includes factory education, workshop education and team education. Enterprises must carry out factory education, workshop education and team education on safety production for new workers; Workers who change jobs, return to work and adopt new technologies, new processes, new equipment and new materials must receive safety and health education in new posts and new operation methods. Educated people can only be employed if they pass the exam.