First, the sampling point setting. Each township (street) shall reasonably set up sampling points according to the village (community) population, regional spatial layout and other factors. In principle, each sampling point shall be equipped with 1 ~ 3 sampling groups (the daily sampling amount of each sampling group is about 1800 person-times). Each township (street) shall set up sampling points within 2 hours after receiving the instruction (see Annex 4 for details). (Responsible unit: township, street)

Second, the registration point. Tents, tables and chairs, laptops (wireless Internet access), wired power supply, transparent plastic boxes (at least 30cm× 50cm) for storing test tube digital strips, ID card readers, etc. Should be equipped with, and arrange personnel to be responsible for the information input and check of the inspected personnel, and the test tube digital bar should be written uniformly, and posted in groups of 10.

Third, the waiting area. Pedestrian walkways should be set with obvious landmark arrows, and single-line signs should be posted to ensure one-way pedestrian flow as much as possible. At least ten seats should be provided, and waiting personnel should wear masks.

Fourth, the collection area. According to the climatic conditions, tents, cold/warm fans, tables and chairs (at least 2 sets) and medical waste barrels (including covers and medical waste bags) are provided to ensure that medical staff can work in a relatively comfortable environment. Equipped with throat swab, test tube rack, disinfectant, gloves, handover box, etc.

Fifth, the buffer zone. Set in the area behind the collection area for sampling personnel to change personal protective equipment, equipped with medical waste barrels (including covers and medical waste bags), disinfectants and protective materials.

Sixth, the acquisition auxiliary area. The area behind the buffer zone is relatively closed. It can be a container type, equipped with power supply, tables and chairs, drinking fountains and other facilities, used to gather people to change clothes, prepare meals, be on duty, etc. , and equipped with air conditioning and other equipment according to the weather conditions.

Seven, temporary isolation zone. Independent places are set around the sampling point to temporarily isolate suspected patients or high-risk groups found in the collection process, as well as medical masks, disposable isolation clinics, terminal disinfection facilities, etc.

Eight, temporary storage of medical waste. Designate an area around the sampling point as a temporary storage place for medical waste, set up obvious signs, set up a warning line, configure medical waste barrels (including lids and medical waste bags), and the municipal medical waste disposal center will collect and dispose of them in time.

Nine, the establishment of sampling site work class. Mainly responsible for the comprehensive coordination and management of sampling point partition setting, material security, order maintenance, information registration and on-site disinfection. , and deploy the corresponding personnel to do a good job of disinfection of the site terminal.

X. sampling process. Enter the personal information of the test object through APP or bug registration or on-site registration-registration of sampling points (5/ 10 people need to enter the sampling tube code)-sampling (1 person disinfection) -5/ 10 people bag a tube-transfer box (in principle, 200 pieces in a box)-120. Before transshipment, protective measures should be taken in strict accordance with the specifications, the number of transshipment pipes and bar codes should be counted and checked, and the transshipment form should be filled in accurately.