Tools:? HP Spectre x360, windows 10.
1. First click the "Start" button in the lower left corner to open the "Control Panel".
2. After entering the control panel, click "Program" when "View Method" is a category.
3. After opening the Program page, click Enable or Disable Windows Features under Programs and Features.
4. After that, you will enter the "Windows Functions" window, find "Telnet Client" in the function list, check it, then click "OK", and you can turn on the Telnet function in a moment.
Usage of elnet command
The Telnet command allows you to communicate with a remote computer using the Telnet protocol. You can run Telnet without parameters, so you can enter data from the Telnet prompt (Microsoft Telnet >；; ) indicates the Telnet context. At the Telnet prompt, you can use the Telnet command to manage the computer running the Telnet client.
Telnet client command prompt accepts the following commands:
Open: establish a Telnet connection to the host using openhostname.
Close: use the command close command to close the existing Telnet connection.
Display: Use the display command to view the current settings of the Telnet client.
Send: Use the send command to send a command to the Telnet server.
The following commands are supported:
Ao: give up the output command.
Ayt: "Are you there" command.
Sends the current escape character.
Ip: interrupt handling command.
Synchronization: perform Telnet synchronization operation.
Send a signal.
Common functions, use telnet command to check the openness and availability of ports: telnet ip port.