Over the past six months, I have stood under the correct leadership of the town party committee and government and the careful guidance of the county agricultural machinery bureau, and conscientiously implemented the principles, policies, laws and regulations of the party and the state on agricultural machinery and the spirit of relevant documents. In order to effectively do a good job in agricultural machinery management, we have focused on the following tasks:
1, find out the foundation, grasp it comprehensively, and carry out the general survey and registration of agricultural machinery in a down-to-earth manner.
According to the unified arrangement and requirements of the county agricultural machinery bureau, our station concentrated time and energy on the overall registration of agricultural machinery in the town. Through village-level self-reporting and comparison of agricultural machinery information fed back by county agricultural machinery bureau, I found out the situation village by village and summarized it in time, and successfully completed the census task. Through this census and registration, we not only know the development status of agricultural machinery in our town, but also clearly understand the existing problems, laying the foundation for better work in the next step.
2. Increase the publicity of agricultural machinery safety, so that the majority of agricultural machinery users can understand the knowledge of agricultural machinery laws and regulations, so that the third summer production can proceed smoothly. In April and May, our station cooperated with the county agricultural machinery bureau and dispatched two propaganda vehicles to actively publicize the party's principles and policies, as well as safety knowledge such as agricultural machinery management regulations, traffic regulations, agricultural machinery operation procedures, road traffic safety law, agricultural machinery promotion law, etc., and actively used propaganda means to expand its influence. During the three summers of this year, our station actively organized agricultural machinery to grab crops and seeds, and at the same time did not relax safety production.
3. Promote the development of agricultural mechanization in our town.
According to the spirit of the relevant documents of the Municipal Bureau of Agricultural Machinery and the County Bureau of Agricultural Machinery, we will increase the promotion of new technologies and machines for agricultural machinery, distribute information, provide farmers with relevant subsidy information, and give play to the subsidy effect of agricultural machinery purchase. This year, * * * bought more than 20 machines (including harvesters, cultivators and tractors) in our town, and the state subsidized more than 250,000 yuan.
4, cooperate with the county agricultural machinery supervision station to do a good job of tractor inspection.
For the safety supervision of agricultural machinery, I did my duty, finished my job, distributed publicity materials, and notified in place. I found that there were no households, no licenses, no licenses, and illegal passengers. I did a comprehensive safety education and conducted an annual inspection of agricultural machinery vehicles in the town to ensure that agricultural machinery accidents were foolproof.
In the first half of the year, our town has made some achievements in agricultural machinery, but there is still a certain gap with the requirements of superiors. In the future, we will be more strict with ourselves and cooperate with the town party Committee, government and county bureau to do better.
Summary of personal work in agricultural machinery station II
Over the past six months, I have been standing in xx County Agricultural Machinery Bureau under the correct leadership of the township party committee and government, guided by the spirit of the rural work conference of the county party committee, and earnestly implemented the objectives and tasks set by the county agricultural mechanization work conference, and achieved good results. Looking back, we have mainly done the following work:
First, the preparation of spring ploughing, in view of the current situation of lack of cattle and labor in spring ploughing production in my hometown, in order to ensure that there is no mistake in spring ploughing production in my hometown, our station actively organizes mechanized ploughing service teams to go deep into the village group and provide on-site service. Because of its good quality, high efficiency and reasonable fees, it has been well received by the masses and solved this problem in my hometown. So far, the township has completed the ploughing of 230,000 mu of flue-cured tobacco and machine-cultivated rice.
Second, the work of agricultural machinery safety production. I always insist? Safety first, prevention first? Through posting slogans and distributing publicity materials, the Law on Safety in Production and the important nature of safety in production were widely publicized in the form of training, so as to comprehensively improve the people's awareness of safety precautions, enhance their sense of responsibility and urgency for safety in production, and sign a letter of responsibility for safety in production with each agricultural machinery operator, so as to implement the responsibility. Are you online? Safe production month? During the activity, our station, together with the personnel from safety supervision, comprehensive management, police station and other relevant departments, conducted two centralized inspections on the main parts of my hometown, such as Luogong Temple, Fujianao and Maijitang, and * * * investigated and corrected 28 illegal vehicles, which achieved good results. In the past six months, there has been no agricultural machinery safety accident in the township, and the history of the economic village directly under it is zero.
Third, promote agricultural machinery. In recent years. With the massive transfer of rural labor force, rice cultivation has become a difficult problem for many farmers. I seized the opportunity, according to the plan at the beginning of the year, vigorously promoted medium-sized machinery such as rice transplanters, rice harvesters and medium-sized rotary cultivators, and strived to stop the whole mechanization of rice. The main work of our station is to win the attention of leaders, formulate implementation plans, sign responsibility letters, distribute 3000 publicity materials, post more than 200 slogans, make publicity columns, and visit interested buyers. At present, the enthusiasm of farmers to buy machines is quite high.
Summary of personal work in agricultural machinery station 3
In the first half of 20xx, the total power of agricultural machinery in our region reached 37,500 kilowatts, the total number of tractors reached 1733, and thousands of sets of supporting agricultural machinery were completed, exceeding the target set at the beginning of the year. In order to ensure that these machines can be put into agricultural production smoothly and safely, in addition to the usual supervision, management and promotion, the most important thing is to do the annual inspection and annual inspection of agricultural machinery. At the beginning of this year, combined with the actual situation in our region, our station issued the Notice on Carrying out the Annual Inspection of Tractors in 20xx and the Safety Publicity and Education for Drivers, and held three meetings of township stationmasters, emphasizing the tasks, requirements and measures of the annual inspection. In the annual inspection, we mainly adopt the method of centralized annual inspection, and the task should be coordinated with people, towns and stations. Up to now, our district has inspected 84 tractors, 226 deformable tractors and 20 combine harvesters this year, accounting for more than 90% of the vehicles to be inspected. Safety education was given to more than 300 drivers. (Because this year's drivers implement a scoring system, there is no need for annual review within the validity period, so there is no annual review frequency and annual review rate. ) 。 By the end of June, our station * * * had gone through more than 0/00 formalities such as replacement, change, transfer and replacement, and made more than 50 driving licenses/kloc-0, 95 XXX0 driving licenses, 25 registration certificates and more than 90 license plates. We have established written and electronic files for vehicles that have been inspected annually, and we will know it as soon as we check it.
This year, the agricultural machinery supervision work in our district has also firmly grasped the center of agricultural machinery safety production, earnestly implemented the special management measures for agricultural machinery safety production around the objectives and tasks of agricultural machinery supervision work throughout the year, made clear the responsibility forms of agricultural machinery safety production at all levels, administered according to law, earnestly strengthened on-site inspection and road inspection, and investigated hidden dangers of accidents. So far, * * * has inspected more than 80 vehicles and corrected more than 20 violations.
This year, in terms of agricultural machinery management, it is mainly to actively organize and do a good job in agricultural mechanization operation services focusing on machine ploughing and machine sowing, earnestly do a good job in the "three summers" work, make preparations, and issue cross-regional operation certificates 18 copies.
According to the spirit of the document, our district subsidized more than 200 agricultural machinery this year. More than 20 combine harvesters, with a subsidy of 4.39 million yuan. In order to fully, effectively and reasonably use the subsidy funds for purchasing agricultural machinery, make it play a role in agricultural production, improve the comprehensive agricultural production capacity and increase farmers' income.
Work plan for the second half of the year:
First, further improve the safety production of agricultural machinery;
Second, organize robots to participate in the "Sanqiu" Agricultural Machinery Conference;
Three, do a good job in agricultural machinery examination, inspection, licensing and certification.
Fourth, do a good job in the assessment of drivers to ensure their high quality.
Five, do a good job in the promotion of agricultural machinery, focusing on the promotion of large-scale farming machinery and wheat machine drilling technology.
Chapter three: summary of agricultural machinery station work
Over the past year, with the support and help of leaders and comrades, I have diligently and practically completed my own work, successfully completed other tasks assigned by leaders, improved in all aspects, and learned work-related knowledge, skills and methods. Now I have summarized and concluded my work this year. If there is anything wrong, please criticize and correct me.
First, strengthen study and constantly improve their business skills and quality.
Bearing in mind the purpose of serving the people wholeheartedly, I persisted in studying business knowledge seriously and actively participated in various learning activities arranged by the unit, from which I learned a lot of useful things. Strive to use the correct theory to guide their own work practice, make clear the work direction, objectives and tasks, keep up with the pace of the times, conscientiously study and publicize the spirit of the 17th and 18th National Congress of the Communist Party of China, and ensure that they are highly consistent with the Party organizations in their thoughts and actions.
Second, be down-to-earth and work hard.
In the past year, I have firmly established? Down-to-earth and hard work? Thinking, earnest, hard work. The first is to be familiar with your work and be competent. Ask an old comrade if you don't know where. Secondly, we should conscientiously complete all the work assigned by the leaders. No matter what kind of work, be patient and meticulous, and don't let the leaders worry.
1, agricultural machinery promotion work: based on the principles of fairness, openness and justice, recognize
Really implement the national, provincial, municipal and district agricultural machinery purchase subsidy policies, do a solid job in the promotion of agricultural mechanization this year, and successfully complete the 20 12 agricultural machinery purchase subsidy task; Actively carry out agricultural machinery skills training, with a total of 299 1 person-time.
2. Agricultural machinery supervision: actively cooperate with the municipal agricultural machinery supervision station to complete Wudu.
Annual inspection and verification of agricultural machinery in the region. For the safety supervision of agricultural machinery, I did my duty, completed my job, distributed publicity materials, actively carried out the annual inspection of tractors, reported households and drivers to apply for certificates and certificates, and conducted comprehensive safety education. At the same time, cooperate with the Municipal Bureau to conduct annual inspection of agricultural machinery vehicles in the whole region to ensure that agricultural machinery accidents are foolproof.
3. File management: further improve the construction of agricultural machinery files.
Work, establish and improve the rules and regulations and tractors, drivers' accounts, files and statistical data files. Established and improved the archives of agricultural machinery skills training personnel in the whole region. Timely report all kinds of statistical data and agricultural machinery information.
4. Actively participate in the creation of safe agricultural machinery villages and towns in the whole region; Actively participate? Sunshine project? Training work, * * * trained more than 20 people. 5. Joint Village Work: I contacted Dangjia Village in Wuku Township, hired 2 poor households and 5 ordinary households, and completed the work task as scheduled in strict accordance with the requirements of the joint village work of the district committee.
Three. Problems: Although some achievements have been made in the whole year, there are still many problems, which are far from the requirements of superiors. Mainly: First, the understanding of agricultural machinery work is not comprehensive enough, and there are sometimes coping phenomena in the work; Second, the innovation ability in the work is not strong enough, just doing things according to the old routine, and the creativity and initiative are not enough. Third, it is not enough to learn and master new policies and regulations. Fourth, there are still shortcomings in working methods, which need to be improved. These deficiencies, I will strive to strengthen and improve in the future work, and strive to do my best.
Four. Work prospect in the new year
In the new year, on the one hand, we should strengthen our own study and constantly improve our own quality, on the other hand, we should do our own work well, complete our work meticulously, and conscientiously complete the things assigned by the leaders. In the usual work, pay attention to the art and methods of work, be good at thinking, make a systematic record of what you have done, and gain some insights and benefits. We should also go deep into the masses, communicate with them more, communicate with organizations more, and exchange work experience and business knowledge with colleagues more.
In short, 20 12, through hard study and continuous exploration, has gained a lot. I firmly believe that as long as you work hard, you can do it well. I am determined to improve my quality and self-cultivation in my future work, study more, let myself surpass myself and strive for greater progress!