1. Collated content: separating the people, things and things that are needed from the people, things and things that are not needed, and then disposing of the people, things and things that are not needed, which is the first step to start the on-site management of 5S consulting in China.

2, the main points of finishing:

(1) Classify all kinds of articles actually placed and delayed at the production site, and distinguish between those needed and those not needed at the site;

(2) For items that are not needed at the site, such as scraps, redundant semi-finished products, chips, garbage, waste products, redundant tools, scrapped equipment, workers' personal daily necessities, etc. We must resolutely clean up the production site. The focus of this work is to resolutely clean up things that are not needed at the scene.

(3) For every station or equipment in the workshop, around the passage, up and down the factory building, inside and outside the toolbox, and all dead corners in the workshop, we should thoroughly search and clean up, so that everything is on site. Resolutely doing this step is the beginning of establishing a good style of work.

3. The purpose of finishing: ① Improve and increase the working area; (2) There is no sundries on the site, the streets are unobstructed, and the work efficiency is improved; (3) reduce collision opportunities, ensure safety and improve quality; (4) Put an end to management mistakes such as mixed loading and mixed loading; ⑤ It is beneficial to reduce inventory and save money; ⑥ Change working style and improve working mood.

(B) Workshop 5S management content rectification

1. rectification content: quantify and locate the people, things and things needed. After the completion of the previous step, scientifically and reasonably arrange and place the items that need to be left at the production site, obtain the required items as quickly as possible, and complete the operation under the most effective rules and regulations and the simplest process.

2. Key points of rectification:

(1) Items should be placed in a fixed place and area, so as to facilitate searching and eliminate mistakes caused by confusion;

(2) Articles should be placed in a scientific and reasonable place. For example, according to the frequency of use of items, things that are often used should be placed nearby (such as the work area), and things that are occasionally used or not commonly used should be placed far away (such as concentrated in a certain place in the workshop);

(3) Visualize the placement of items, so that the quantitative loaded items can be counted in a few days, and the areas where different items are placed are distinguished with different colors and marks.

3. Rectification purpose: The reasonable arrangement of articles at the production site is conducive to improving work efficiency and product quality and ensuring production safety.

(3) Cleaning of 5S management contents in the workshop

1, cleaning content: clean the workplace, and repair the equipment immediately if it is abnormal, so as to make it return to normal. Dust, oil, iron filings, garbage, etc. Will be produced in the production process of the production site, thus making the site dirty. Dirty scene will reduce the accuracy of equipment, cause frequent failures, affect product quality, and prevent safety accidents; Dirty scenes will affect people's working mood and make people unwilling to stay for a long time. Therefore, it is necessary to remove those dirt through cleaning activities and create a bright and comfortable working environment.

2, the main points of cleaning:

(1) Articles for your own use, such as equipment and tools. Clean yourself, don't rely on others, and don't add special cleaners;

(2) Equipment cleaning, focusing on equipment maintenance. Cleaning equipment should be combined with point inspection of equipment, that is, point inspection and repair; Cleaning equipment should be lubricated at the same time, and cleaning is also maintenance;

③ Cleaning is also for improvement. When cleaning the ground, flying debris and oil-water leakage are found. It is necessary to find out the reasons and take measures to improve them.

3, the purpose of cleaning:

① Good working environment and working mood;

② Maintenance of equipment;

(3) Immediately handle any abnormality found;

(4) A clean working environment and a beautiful mood.

(4) Cleanliness of 5S management contents in the workshop

1. Contents of cleaning: After sorting, rectifying and cleaning, it should be carefully maintained to keep the site in perfect and best condition. Cleaning is the persistence and deepening of the first three activities, thus eliminating the root causes of safety accidents. Create a good working environment and let employees work happily.

2, the main points of cleaning:

(1) The workshop environment should not only be neat, but also clean and hygienic, so as to ensure the health of workers and improve their labor enthusiasm;

(2) Not only the goods should be clean, but also the workers themselves should be clean, such as clean work clothes, neat instruments, timely haircut, shaving, manicure and bathing. ;

③ Workers should not only be physically clean, but also mentally "clean", be polite and respect others;

(4) Protect the environment from pollution, further eliminate turbid air, dust, noise and pollution sources, and eliminate occupational diseases.

3. The purpose of cleaning is to save energy, reduce consumption, reduce pollution and increase efficiency.

(5) Literacy of 5S management content in the workshop

1. Content of literacy: Literacy is education. Efforts to improve the quality of employees and form the habit and style of strictly observing rules and regulations are the core contents of 5S management in the workshop. Without the improvement of personnel quality, all activities can not be carried out smoothly and can not be adhered to. Therefore, to grasp the content of 5S management in the workshop, we must always focus on improving people's quality.

2, the main points of literacy:

① Insist on 5S management every day and form good habits;

(2) To study and train each team member on various rules and regulations of the company and departments.

(3) comply with the workshop management system, including workflow, labor discipline, production safety, equipment management, equipment management, turnover management, salary management, etc.

(4) The workshop team members will be selected once a year, and the outstanding employees will be rewarded by the company. The contents of the assessment are mainly four aspects: personal morality (professionalism, sense of responsibility and moral code of conduct), diligence (work attitude), ability (technical ability, efficiency and quality of completing tasks, error rate) and performance (work performance, whether creative work can be carried out).

The purpose of literacy is to improve people's quality and make employees pay attention to any work.