1, all personnel are not allowed to wear vests, shirtless and slippers to work. Women workers in the workshop are not allowed to wear skirts to work.

Smoking is forbidden in the factory.

3, employees in the production operation, should concentrate, don't pick up guests, don't leave their posts, don't laugh loudly, don't read the newspaper, it is forbidden to drink, it is forbidden to bring children and irrelevant personnel into the production site.

Second, the safety leadership responsibilities:

1, often educate and publicize the common sense of safety production for employees.

2, responsible for checking the implementation of safety production laws and regulations and safety facilities, eliminate hidden dangers and prevent accidents.

3. Regularly test the performance of safety facilities and the safety factor of production equipment. If any fault or influence is found, repair it in time. If it still does not meet the requirements, report it to the company leader for handling.

4. Regularly sum up safety work experience, learn relevant documents, study and improve facilities and work plans, improve working conditions, and provide safety work records.

5, actively participate in various safety activities, and strive to improve the knowledge and technical level of production safety.

Third, succession:

Strictly implement the handover system, carefully check after work, cut off the power supply and gas supply, put out the fire and clean up the scene.

Fourth, equipment maintenance: strictly abide by the equipment operation procedures to avoid equipment accidents.

1, always check the operating equipment and places, and try to eliminate hidden dangers immediately when they are found. Don't be careless and bring hidden dangers.

2. Strictly implement safety operation procedures and check production equipment before shift. Work can only be started after it is confirmed that there are no problems. When there are abnormal sounds in the work or affect the safety and quality, the production should be stopped immediately, the reasons should be found out in time, or reported to the company leaders for handling.

3. The repaired equipment can only be used after passing the test, and the equipment with serious risk factors should be reported to the company leader.

Scrapping and dismantling.

4, do a good job in the maintenance of production equipment, keep the workplace clean and hygienic.

V. Welding:

1, electric welding, gas welding, must choose a safe place, especially aerial work, to master the degree of Mars injection, pay attention to safety.

2, oxygen cylinder, B fast generator are not allowed to be close to the heat source or exposure.

3. It is forbidden for welders to weld near flammable places such as dust or glue, and take safety measures.

6. Air compressor: The air compressor should be turned off after use.

Fire hydrants: Fire fighting equipment such as fire hydrants and fire extinguishers should not be blocked or stacked inside and outside the company.

Eight, the provisions on the safe use of electrical equipment:

1, all breakers and circuit breakers are not allowed to be replaced by overload disconnection and metal wires.

2. The outgoing lines of all electrical equipment must be firmly and reliably connected to the distribution box.

3, open flame operation, need to have modes, should clean up the scene after use.

4. After the work, the power switch of all electrical equipment must be cut off.

5, all wiring must be well insulated, wires shall not be exposed, and all switch covers shall not be missing.

6. Electrician live work should be carried out under the condition of reliable safety measures.

7. In case of emergency motor failure or man-made accident, cut off the power supply immediately.

Nine, stamping:

1. During the operation, you must cut your long hair short, tie it up or wear a hat. You are not allowed to wear slippers to work, and you are not allowed to talk during the operation.

2. It is forbidden to punch two pieces of sheet metal at the same time, so as not to be forced to go to work when you are in a hurry and feel unwell. If a fault is found, it should be stopped immediately.

Ten, metalworking:

1. During operation and production, the castings should be clamped. Slippers are not allowed to work and gloves are not allowed to operate (drillers are only allowed to wear one left-handed glove).

2. Shake the lathe carriage to the tailstock after work, and cut off all power switches such as electric fans, electric lights, electric batons, lathes and drilling machines to ensure safety.

3. It is forbidden to wear loose clothes or ties that are easily hooked or hooked by the machine. Gloves are strictly prohibited for drilling machines, milling machines, lathes, conveyors, rotating machinery and operators who are in danger of being pinched.

Eleven, the principle of preventing mechanical injury

1. Wear protective equipment correctly: Protective equipment protects the safety and health of employees, and protective equipment such as clothes, hats and shoes must be worn correctly. (Die-casting: There are no cloth shoes, leather shoes and gloves, and workshop personnel can't hide gloves. There are three tights to wear work clothes: tight cuffs, tight hem and tight trousers. High-speed cutting should insist on wearing protective glasses, and female workers should wear working hats when entering the workshop.

2. Stand still. If you use a grinder, stand on the side to prevent yourself from being hurt when the grinding wheel flies out. For another example, don't walk or stay under the crane boom or hook.

3, rotating parts shall not be shelved. Especially for machine tools, in the process of clamping parts, it is easy to put measuring parts or other objects on rotating parts conveniently. When driving, these objects are easy to fly out and cause accidents.

Twelve, the danger of commonly used mechanical equipment:

1, tape and hook. Operators' gloves, coat hem, trouser legs, shoelaces, long hair, etc. are easily rolled into or brought into the machine if they come into contact with rotating parts. Or caught by the protruding part of the rotating part, causing injury.

2, cutting. Rotating parts such as milling cutters are knives, which are very dangerous. If the operator touches the knife incorrectly, he will be stabbed or cut.

Thirteen. Aerial work: pay attention to safety and take appropriate protective measures.

Fourteen, dust environment: dust mask should be worn.

15. dangerous chemicals: inflammable, explosive and toxic substances must be stored in special warehouses, and fireworks are strictly prohibited around them.

Sixteen, the correct use of labor protection articles. .

1, easy to cause hand injury, wear gloves to bargain. All operators who are engaged in the work that is easy to burn, burn, stab and severely abrade their hands during operation should be given gloves and must be required to wear gloves.

2, electrical operators must use insulating gloves when exercising, cleaning workers hand contact with gasoline, latex gloves should be used.