Methods/steps

& gt0 1

Download the automatic repair tool running 360, then repair according to the tips given by the program, and restart after the repair is completed.

& gt02

Open the installation directory of 360 security guards, for example, the default path is "C: \ \ Program files \ \ 360 \ \ 360Safe", find WinSockLSP.reg under this path, double-click to open it, and select "Yes" in the pop-up window to restart the computer immediately.

The specific operation method is as follows:

1. Right-click the 360 Security Guard icon and select Properties.

2. Open the property window and select "Open Folder Location (F)" in the "Shortcut" option.

3. Find WinSockLSP.reg according to the path, and double-click.

4. Then select "Yes" in the pop-up window to restart the computer to solve the problem.

& gt03

1. Right-click the 360 Security Guard icon on the taskbar in the lower right corner and select "Exit".

2. Click Start-All Programs-Accessories-Command Prompt, right-click the command prompt, and select "Run CMD as administrator" in the menu.

3. Enter SH-"Winsock-"reset under cmd, and press enter (there may be errors during the operation, and the prompt code is: 10 107, which can be ignored directly and the window can be closed directly).

4. When finished, close all windows and restart the computer.

5. If an orange prompt box pops up after restarting, please select "Allow this program" and click "Confirm".

2. What should I do if the windows communication port fails to initialize when the computer is turned on?

problem description

As for part of VISTA, WIN7 system can't surf the Internet normally, and the solution of "communication port initialization failed" is prompted when connecting to the network.

If the user feedbacks that after the windows system is started, he encounters the error prompt of "windows communication port initialization failed", which means that the fault cannot be started.

1: Exit 360 Security Guard, right-click the 360 Security Guard icon in the lower right corner, and then select Exit.

2. Click Start-All Programs-Accessories-Command Prompt, right-click the command prompt, and select "Run as Administrator (a)" in the menu to open the dialog box.

3. Enter sh winsock reset and press enter (the command is case-insensitive, and an error may be prompted later: 10 107, but close the window directly):

4: After completing the above operations, close all windows and restart the computer.

3. Computer communication port initialization failed, how to solve it?

If 360 is installed on your computer, you can't surf the Internet normally after upgrading from 20:30 on February 2 to 2:00 the next morning. That's because 360 security guards upgraded the active defense function urgently. -Repair method: 1, download the 360 automatic repair tool (/fix.exe), copy it to the problematic computer, double-click to run, and follow the prompts to repair it.

2. Call our customer service number directly: 010-58781105, and the staff will help you solve it as soon as possible. The manual solution is as follows: 1. ) Click the Start menu and enter cmd.exe in the search program and file box, as shown below: 2.) Right-click the cmd.exe icon and select Run as Administrator in the pop-up menu, as shown below: 3.) The UAC window pops up. Click "Allow". 4.) Enter: sh winsock resets 5. After running, restart the computer according to the prompt. 6.) After restarting the computer, an orange prompt box will pop up. Please select Allow this program and click OK.

7.) Open 360 Security Guard, click "Kill Troy" on the interface, and execute "Quick Scan" to kill Troy. Additional: If you still can't surf the Internet after the above operation, please follow the following steps 1 time: 1. ) restart the computer 2. After restarting the computer, press F8 to select the startup mode and select Safe Mode 3. ) Perform the above five steps in safe mode, and then restart the solution for manual repair.

4. What if the system prompts "windows communication port initialization failed"?

Nowadays, many computer users like to use some optimization tools such as Windows optimizer and super rabbit, just like talking about hygiene. They like to use these tools to "clean" their computers when they are free. I hope to clean up the garbage in the computer and leave a clean space for myself. But if these softwares are not used properly, many problems will follow.

I believe many users have optimized the function of "registry information cleaning" with master optimizer. This function has many advantages, but over-optimization leads to the deletion of some system registration information by mistake, which leads to system problems. When the machine is optimized by the optimizer, it will appear after restarting:

1. Stay for a long time after entering the welcome. There is nothing on the screen except the mouse. It takes about 10 minutes to look at the desktop map. Although Windows Task Manager can be called up, there are only 17 processes, which is less than when the system is normal.

2. After entering the system, the webpage can't be opened, but the LAN connection is normal. MSN, QQ, email sending and receiving software, etc. all need to connect to the network, and all prompt "Windows communication port initialization failed." Anti-virus software such as Kaspersky installed on the computer will not work properly.

3. After entering the "stat -ano" command in DOS, the communication port cannot be displayed. After entering "ipconfig/all", I can't find my own IP address. But in the control panel, the IP address, gateway and domain name server address are completely set. .

Because most users have no backup after optimizing the registry, they can't use the optimizer's recovery function. Although you can enter safe mode, you cannot use Restore to Last Known Configuration to restore or restore the system. In desperation, we had to redo the system.

Therefore, it is suggested that friends who use optimization tools such as Windows Optimizer and Super Rabbit should be cautious about some unfamiliar functions. Avoid frequent optimization. When optimizing the registry, you must pay attention to backup in case of emergency.

5. What if the computer prompts that the initialization of the communication port fails?

It is likely that the USB flash drive is a startup disk or infected with a virus; Can't you access the internet or system now? If you can't access the Internet: As for some Vista systems, Win 7 systems can't access the Internet normally. If you encounter an error message "windows communication port initialization failed" when connecting to the network, you cannot start it. 2. Click Start-All Programs-Accessories-Command Prompt and right-click Command Prompt. Select "Run as Administrator (A)" in the menu, and a dialog box will pop up: 3. Enter sh winsock reset, and press enter (the command is case-insensitive, and you may be prompted with an error: 10 107, but close the window directly): 4. After the above operations, close all windows and restart the computer.

360 If prompted to allow operation; .

6. All computer programs can't be opened, and the windows port connection failed.

Port 23 is the port of tel, and port 23 in the computer is mainly used for Tel (Remote Login) service. However, some users encounter the situation that Tel cannot be used when using the computer, and the connection with the prompt port fails. So, how to solve the problem of computer prompt connection failure?

Several reference methods for computer to prompt port connection failure;

First, first, ping the remote login server. Flat generalists can be used.

Second, if the ping fails, the tel service will be shut down. Need to start the service, the specific steps are as follows:

On the "desktop"->; ; "computer"->; ; "management"->; ; "services and applications"->; ; "service"->; "telephone"->; ; Start the service. If there is Tel service, you can skip the next step.

Third, there are cases where "Tel" cannot be found in "service". Maybe the Tel service of the computer is not installed.

The installation steps are: "Control Panel"->; ; "procedures and functions"->; ; "turn Windows features on or off"->; "telephone client"->; ; Just confirm the installation.

After completing the installation and opening of Tel, you can use the Tel service normally, so you won't be prompted that the port connection failed.

Further reading: About Port 23

Port 23 is the port of tel. Tel protocol is a member of TCP/IP protocol family, and it is the standard protocol and main mode of internal remote login service. It enables users to complete the remote host work on the local computer. Connect to the server using the tel program on the end user's computer. End users can enter commands in the tel program, and these commands will run on the server as if they were directly entered on the console of the server. You can control the server locally. To start a tel session, you must enter a user name and password to log in to the server. Tel is a common method to remotely control a Web server.

7. What happened to the initialization failure of 7.Windows communication port?

The reason why initialization of windows communication port failed:

1, it takes about six minutes or more to enter the system after the computer is turned on.

2. The input of stat-an command is garbled.

If you surf the Internet wirelessly, you will find that you can't connect to the Internet wirelessly.

4. Double-clicking the 360 icon after booting will prompt that the initialization of Windows communication port failed.

Solution to the initialization failure of windows communication port;

1. First, exit 360 security. Right-click the icon in the lower right corner of the computer and select Exit.

2. Then run CMD as an administrator.

3. Then Enter the CMD command and click Enter, and enter sh winsock reset in the pop-up window. After entering the command, the error code will be 10 107.

Finally, you can solve the problem by restarting the computer.