How to use the ping command to check the operation of the local network?

How to use ping to detect computer network?

First, you need to go to the command line page to use the ping command. Use the shortcut key combination win+R to bring up the running window, enter "CMD", and click to enter the command line page. After entering the command line page, enter ping 10. 1 to check whether the local TCP/IP protocol works normally.

Ping is to send a test package to a website to see if the other website responds and count the response time, so as to test the network. \x0d\ The specific way is to start-run-cmd, enter ping space+URL you want to ping in the brought-up dos window, and press enter.

The viewing method is as follows: Click Start-Run, enter cmd, and enter the command prompt window. Enter ipconfig to view all the network connections in the computer, including a series of information such as IP address, mask and gateway. Click the computer IP address, subnet mask and gateway address in the previous step.

When using the Ping tool to check the TCP/IP protocol on the network server and any client, just Ping the IP address of any other computer in the network.

How to check the network connection status by ping?

1. Use the PING command to check whether two computers can access and communicate with each other. The specific steps are as follows: Open a command prompt window. In Windows system, you can press Win+R, then enter cmd and press enter to open the command prompt window.

2. Before using the ping command, you need to enter the command line page. Use the shortcut key combination win+R to bring up the running window, enter "CMD" and click to enter the command line page. After entering the command line page, enter ping 10. 1 to check whether the local TCP/IP protocol works normally.

3. Turn on the computer first, then press WIN+R on the keyboard to open the running interface, enter CMD in the input box of the interface and press enter. Then use the keyboard to enter ping 10. 1 in the pop-up interface, and press enter on the keyboard.

How to use ping command to test network connection?

You can use the ping command in cmd of win 10.

Press "Win+R" to open "Run". Enter: CMD Press Enter to open the command prompt; Enter: pingxxx.xxx.xxx in the command prompt box, and press enter, and the connection response data will appear. If the loss is serious, there is something wrong with "TCP/IP".

First turn on the computer, then press WIN+R on the keyboard to open the running interface, enter CMD in the input box of the interface and press enter. Then use the keyboard to enter ping 10. 1 in the pop-up interface, and press enter on the keyboard.

Use the PING command to see if two computers can access and communicate with each other. The specific steps are as follows: Open a command prompt window. In Windows system, you can press Win+R, then enter cmd and press enter to open the command prompt window.

First get the TCP/IP configuration of the computer, open a command prompt, and then type ipconfig. In the display of the ipconfig command, ensure that the network card of the TCP/IP configuration being tested is not in the "media disconnected" state.

How does the ping command detect network faults?

First, use the Ping command to diagnose whether the local TCP/IP protocol is installed normally. The detection method is as follows: press win+R to run, then enter the CMD command in the run dialog box, and press Enter to enter the command operation interface.

According to the above method, we can also use the Ping command to check the working condition of TCP/IP on any client computer.

Press WIN+R key to start running, and enter CMD to open the command window; Enter ping10.1; +0 in the window; The network situation can be judged by time and packet loss rate. The picture above is normal. If you accept 0 and lose it all, it is not normal.

Whether all gateways (routers) between are running. Use ping command to detect the connectivity of DNS server IP address. If this command is answered correctly, it means that you can connect to the DNS server, the network connection is smooth, and users can surf the Internet normally.

Win7 system opens the start menu. Enter cmd in the search box, and then press Enter to enter the command line window. After entering the command line, just enter the ping command directly. For example, to check whether you can surf the Internet, you can enter "ping".

Start the computer with Windows system. After the system starts, press and hold win and R keys at the same time to open the run dialog box. Enter "cmd" in the "Open" input box of the dialog box, and press "OK" button to enter the MSDOS interface. Cmd is case-insensitive.

How does the Ping command test the network?

For example, when a web page of a website is inaccessible, you can use the Ping command to detect it.

The steps of testing the network with ping are as follows: Operating environment: Lenovo v340, windows7, etc. Click Run in the startup system, and enter the cmd command in the run bar to pop up the DOS window in the operating system, where you can input various DOS commands intuitively and conveniently.

How to detect the network fault of your computer through ping command?

According to the above method, we can also use the Ping command to check the working condition of TCP/IP on any client computer.

Matters needing attention in etiquette knowledge of venue layout

What kind of period was Macedonia?

New Year's Day teaching plan propaganda slogan

What is the best engine oil for Dongfeng Nissan Liwei maintenance?

A complete collection of competitive slogans

Which country's cartoon is octopus?

Let customers apply for credit cards.

Introduction of participating dormitories

What are the tasks of honesty and pragmatism in values?

The slogan of the Year of the Tiger is full of domineering.