1, arrangement of construction period
The kitchen ceiling is basically installed with aluminum gusset plates, which are generally installed after the wall tiles are pasted.
▲ Install the aluminum gusset plate.
As far as the whole kitchen decoration process is concerned, the correct construction arrangement is: preliminary design-painting waterproof coating (selection)-water and electricity installation and transformation-wall tile-aluminum gusset ceiling-cabinet installation-installation of range hoods, stoves, water heaters and other electrical appliances.
▲ range hood electric appliance, installed behind the aluminum buckle plate.
This construction arrangement is more reasonable, and each process is step by step, which is conducive to shortening the decoration cycle.
▲ Reasonable installation sequence arrangement is conducive to shortening the decoration cycle.
2. Reasonable decoration protection
Decoration protection is a key and noticeable item in decoration. If the decoration protection is not done well, for example, the floor tile is not covered with protective plastic film after paving, then if the decoration materials or garbage are suitable in the later stage, the floor tile may be scratched if it is rubbed hard.
▲ Do a good job in decoration and protection to avoid damage to the completed projects in the early stage in the later stage of construction.
The new house that has just been renovated and has not moved in has scratches on the floor tiles. I believe that most people will have a gap. Regarding the installation steps of aluminum gusset ceiling and range hood, I will give two negative examples casually:
(1) The range hood was knocked out.
When installing the aluminum gusset plate, it is necessary to install the metal keel bracket on the ceiling, and the aluminum gusset plate at the corner needs to be cut, so the overall installation action is large. If the range hood has been installed by this time, the installer turns around carelessly, the metal keel on his hand hits the range hood, and the panel of the range hood is broken or scratched, and everyone is unhappy.
▲ Install the aluminum gusset after the range hood is installed, and the range hood is easy to be damaged.
The stove is broken.
Therefore, the suitable range hood has been equipped with cabinets and stoves. If the aluminum gusset plate is installed at this time, in case the worker who installs the aluminum gusset plate is comfortable, his feet will step on the stove to install the aluminum gusset plate. If the worker is a 200-pound fat man and steps on the stove, the stove will be broken, and the worker will be in trouble when he falls to the ground.
▲ If the installer steps on the aluminum buckle plate on the cooker, it is easy to cause the cooker to break.
To sum up, the kitchen should be equipped with aluminum gusset plates before the range hood, no matter from the perspective of construction progress or decoration protection. There is a classic saying in the decoration industry called "Golden Kitchen and Silver Guard", which shows how high the kitchen is in the decoration. After all, the kitchen is a space to satisfy the appetite of a family, so when decorating the kitchen, we should be careful to avoid mistakes.
▲ Reasonable arrangement makes the decoration more pleasant.
Finally, once again emphasize the correct decoration process of the kitchen: preliminary design-painting waterproof coating (selection)-installation and transformation of water and electricity-sticking wall tiles-aluminum gusset ceiling-cabinet installation-installation of range hoods, cookers, water heaters and other electrical appliances.