XM-X1 (F97) CROSS BONE GUNDAM X1

Unit number: ·ガンダムX1 English: Crossbone Gundam X-1 Chinese: Corsair Gundam

XM-X1 CBX1 is the first small mobile suit designed by the Federal Naval Strategic Research Institute (SNRI) to verify the movable experiment of small mobile suits in high gravity circles. As early as the One Year War, the Jupiter fleet had ordinary mobile suits equipped with large thrusters and fuel tanks as escorts. Manufactured by SNRI, the company's official internal model is F-97. In order to hide the manufacturer's model number, the model number was changed to XM-X when delivered to the Cross Vanguard

XM-X1 The biggest appearance feature of the CBX GUNDAM is the X-shaped thruster deployed on the back. This design is the product of redesign in order to effectively overcome Jupiter's super gravity. A mobile suit in the Earth's sphere can achieve high maneuverability by using pose nozzles distributed all over the body. However, if it is used on a mobile suit in the Jupiter's sphere, each pose nozzle must be enlarged, and the associated body must also be enlarged. . In order to be able to use high-output thrusters, a large nuclear fusion furnace is required, which will inevitably increase the weight of the aircraft. In order to make the body's movements more sensitive, a larger nuclear fusion furnace is needed... It continues in a vicious circle...

So, the developers came up with a way to make the thrusters very flexible. activities and can change direction. Therefore, the XM-X1 CBX1 body achieves the goal of high mobility without changing the weight of the body.

As far as special equipment is concerned, XM-X1 CBX1 uses an anti-beam-coating-manteau, which can cover the whole body, and the X-shaped thrusters behind it are folded and placed behind the back.

In order to adapt to the high mobility of the XM-X series, the weapons of the XM-X1 CBX1 are more focused on white soldier combat. ZAN BUSTER, which is equivalent to the beam rifle, can be divided into two parts: the beam gun (BUSTER GUN) and the beam sword (BEAM ZAMBER). The beam gun is an auxiliary, mainly in the beam sword part. Because the particles of the beam sword increase the longitudinal acceleration when generating the beam, its power is greatly increased. Even when the opponent uses a beam shield, it can cut through the shield and the body together.

Other weapons include thermal daggers that are stored inside the soles of the feet and use the waste heat of the propellers on the soles of the feet to instantly accelerate and generate heat. In an emergency, it can suddenly transform and grab the enemy's front thigh protector and claw anchor. BEAM MARKER is an arm beam generator that can be used as a beam shield when fully deployed.

In addition, in order to facilitate heat dissipation, the mask on the head will be opened and closed several times. This is because in order to increase the body's ability to withstand close combat, the armor is thickened, making the structurally weak air diversion holes smaller. The area is reduced, and in order to facilitate heat dissipation, the mask can only be opened and closed frequently.

It is not an exaggeration to say that the Corsair Gundam is the most powerful mobile suit of the U.C.0133 era. However, it is an indisputable fact that due to the overall balance of the aircraft body and the special requirements of the weapons, the requirements for the pilot are also limited. Whether the Corsair Gundam is the strongest depends entirely on the skill of the pilot.

The anti-beam jacket and cloak is a reactive armor specially designed to resist beams by evaporating the surface layer to offset its energy after being attacked by a beam. Can withstand an average of 5 rounds. The advantage compared with the beam shield is that it is not easy to be discovered by the enemy. Furthermore, because no energy is consumed, the MS startup time can be extended. The shoulder beam gun can be pulled out and used as a beam sword, and the beam shield can be used as a soldering iron marker after deformation.

Corsair Gundam The apron part of the body has changed the place where the claw anchor was originally stored into the spiral whip. Although the power of the spiral steel whip is not as powerful as Guabase's snake-shaped beam circular saw, it plays its due role in dealing with this machine.

Pirate Gundam Assembler

The X1 modified that was damaged in the battle was repaired with X3 parts in an emergency. When using the X3 kit on both arms, the beam shield cannot be used, but the I-stand can be deployed like the X3. The chest is also the same as X3, with two additional Gatling guns. The hook shield added to the left wrist later was a general-purpose MS tool borrowed from the Earth Federation Forces

Fully Armored Corsair Gundam CROSS BONE Gundam FULL CLOTH

"Mobile Suit Corsair Gundam Steel Seven" "The Last Skull Gundam" in "People". After being attacked by troops dispatched by the Kagemusha, the new president of the Jupiter Empire, and fighting with Tobia and other pirate army remnants and their collaborators, S.N.R.I's lunar base was also destroyed. In this battle, the X1 Kai. Kai suffered a devastating blow and was repaired using the remaining parts of the X3. The new equipment "Full Cloth" is made from the materials of the ABC cloak. Each layer of ABC cloak has the same function, so the beam resistance increases with the number of layers. In addition, the skull unit added to the shoulder armor includes an I force field generator that is more powerful than the X3. With its entire body strengthened for Jupiter's guerrilla operations, the Corsair Gundam, which was originally excellent at close combat, became more difficult to shoot down from a long distance.

Technical parameters:

Standard all-round cockpit

Revelation and equipment date: unknown

Total height: 15.9M

Basic weight: 9.5 metric tons

Full load weight: 24.8 metric tons

Generator output: 5280KW

Total propeller output: 100000~120000KG< /p>

Individual thruster output: 25000~30000KG (X4)

Number of attitude adjustment nozzles: 34

Maximum acceleration: 4.03~4.84G

Core module system: Core fighter

Armor type: Unknown

Structure type: Unknown

Initial equipment:

ABC anti-beam cloak

60mm Vulcan Cannon X2

Beam Saber (also used as a cannon)

Beam Shield (also used as a soldering iron marker) X2

Large Beam Knife X1

Beam Rifle Combined)

Small Nuclear Duster

X1·Change Equipment:

Gyro Whip

) Equipment:

Sparrow Screen Shattering Crossbow

X1·FULL CLOTH Equipment:

Full Cloth (full coverage equipment)

Skeleton Head assembly

Muramasa Crazy Sword

Chest Gatling Gun X2

The "evolution" history of Pirate X1:

X1

X1·Change

X1·Change·Change (Skeleton Heart)

X1 Assembly Machine

X1·FULL CLOTH XM-X2 (F97 ) CROSS BONE GUNDAM X2

Unit number: Corsair Gundam Empire (After Betrayal)

The basic performance of this machine is exactly the same as that of the X1. The only difference is the paint and the shape of the antenna. In addition, a projectile spear has been added based on the driver's habits. X2·Gai was received by Jupiter 9 and modified with technology from the Jupiter Empire. The core machine of X2 was driven away when Tobia escaped, so the X-type thruster and cockpit were basically restored to their original appearance based on the data on the X2 body computer and combat data observed from the outside.

In appearance, although the thruster on the back of the X2 has been enlarged, the thrust horsepower has not increased significantly. It can be said that it is roughly the same as the original body. This is due to the technological gap between the Jupiter Empire Army and the difficulty in reproducing the original appearance of a strange machine. Because the original core machine has been lost, the current body can no longer be separated from the cockpit

Technical parameters:

Standard all-round cockpit

Date of disclosure and deployment: Unknown

Total height: 15.9M

Basic weight: 9.5 metric tons

Fully loaded weight: 24.8 metric tons

Generator Output: 5280KW

Total thruster output: 100000~120000KG

Individual thruster output: 25000~30000KG (X4)

Number of attitude adjustment nozzles: 34< /p>

Maximum acceleration: 4.03~4.84G

Core module system: core fighter

Armor type: unknown

Structural type: unknown

Initial equipment:

ABC anti-beam cloak

60mm Vulcan Cannon X2

Beam Saber (also used as a cannon) X2

Thermal energy short knife X2

Beam shield (also used as a soldering iron marker) X2

Large beam knife Rifle X1

ZAN BUSTER (composed of a large beam knife + beam rifle)

Small nuclear duster

Projection spear

X2· Modified equipment:

The high-output MEGA particle destruction cannon is an improved body based on X1 and X2. It only has some modified weapons. It is basically the same as the previous models XM-X1 and 2. Not much difference. The modified parts are the chest armor and the front of the wrist. The chest armor increases the thickness of the armor and adds two Gatling machine guns, mainly to increase the firepower in close combat. The biggest difference is that the beam shield on the wrist is replaced by an I force field generating device. The I force field is one of the most effective defense devices against beam weapons and has been used since the One Year War. But at that time, it was only installed on the MA series airframes with high-output engines, and it was not a technology that was popularized on general models.

After U.C.0123, the installation of small mobile suits was reconsidered due to the increase in power. As for the mechanism, it uses a strong magnetic field to bend the opponent's beam or spread it. Therefore, the more powerful the beam, the more it can bounce back, and it can even be used to kill it with force. Basically, the structure is different from that of the beam shield. Each has its own pros and cons in terms of performance. If hit by a battleship gun-level beam, nine out of ten machines using a beam shield will be severely damaged. However, from the point of view of being able to avoid the beam, the I force field can protect the machine from direct hits, which is conducive to defense.

However, with the existing technology, it can only achieve a startup time of 105 seconds and a cooling time of 120 seconds; under continuous use, there will be a completely defenseless state of 15 seconds. From the perspective of the driver's survival probability, it is not an ideal application method. It can only be said to be an incomplete equipment that can only be found on experimental bodies. Later, as the performance of high-cost beam shields improved, this technology gradually disappeared.

New equipment developed at the same time as X3 is the Muramasa Crazy Sword. The basic points of X3's equipment are the strongest "spear" and the strongest "shield". The Muramasa Crazy Sword is another newly developed weapon, the strongest "spear", in addition to the SNRI equipment ABC cloak and I stand.

The "blade" of Muramasa's Crazy Sword is equipped with 14 beam swords, and a beam gun is installed on the end of the sword. Taken together, Muramasa's Crazy Sword can be called the strongest "spear". However, Muramasa's Crazy Sword also has the disadvantage of consuming too much energy and cannot be used for a long time.

These are the combat data of the Cross Vanguard, tailor-made for ace pilots, but the only miscalculation is that it was passed to the almost completely amateur Tobia Aronnax. superior.

Technical parameters:

Standard full-circle cockpit

Basic data unknown

Initial equipment:

60mm Vulcan Cannon X2

Beam Saber (also used as a cannon) Generator X2

Large-scale beam knife X1

Beam rifle >Beam Rifle X1 Gatling Gun Some of the mass-produced F-91s specially used by ACE pilots are extremely complete, and their performance is almost as good as any high-end MS of the same period (in addition to meeting the needs of ACE pilots, this is probably also the purpose of the Naval Strategic Research Institute to maintain its technology transfer and Measures taken for industrial grade).

Among them, the Federation’s blue flash—Captain Harrison Martin’s mass-produced Gundam F91 painted in dark blue all over—is the most outstanding. Not only does this aircraft have the same maximum maneuvering mode as the prototype, but its improved cooling system and biocomputer allow it to smoothly dissipate heat in the maximum maneuvering mode by simply developing a mask on the head and unfolding the cooling wings. The waste heat remaining on the armor surface produces the phenomenon of heavy metal ion stripping (the heavy metal ion stripping phenomenon was not originally a function conceived when the F-91 was designed, but a special phenomenon caused by incomplete heat dissipation of the prototype), so the overall performance of the airframe More stable than prototype.

After the Battle of Jupiter, part of the arms and legs of Captain Harrison's blue-painted aircraft became white (this was caused by the "SADING 107" caused by the remnants of the Jupiter Army in U.C. 0135 Events" and "E-Plan Events" can be confirmed). It is speculated that this change is not only the repair of battle damage, but also the reason for some minor adjustments and upgrades to the airframe.